Adom Custom Electronic Load

@@ -1,6 +1,6 @@ # AI Flow run: codex on board-0 -**Running**: step `outline`, 567.7 min of AI time since the prompt (3247.2 min on the wall clock). This page updates at every step change.+**Running**: step `current`, 567.9 min of AI time since the prompt (3247.4 min on the wall clock). This page updates at every step change.  Prompt at 2026-10-07T17:49:14Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -20,8 +20,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 8 | 2026-10-09T12:31:28Z | (open) | 24.5 | 31 | Resume the electronic load through all AIFlow design gates after dashboard corrections; co | | 9 | 2026-10-09T13:26:48Z | (open) | 198.1 | 88 | Continue original electronic-load objective. Compact 5 W prototype is the working basis fr | | 10 | 2026-10-09T18:12:40Z | (open) | 10.1 | 99 | Resume electronic-load completion: inspect native board, land reviewed diode thermal vias  |-| 11 | 2026-10-09T20:02:16Z | (open) | 61.9 | 172 | Continue board 18 to completion; resolve package-mounted cooling and thermal solver suppor |-| **all** | | | **567.7** | | |+| 11 | 2026-10-09T20:02:16Z | (open) | 62.0 | 172 | Continue board 18 to completion; resolve package-mounted cooling and thermal solver suppor |+| **all** | | | **567.9** | | |  ## Per step @@ -33,15 +33,16 @@ AI time only, the idle cut out. | placement | 9.0 | 0.0 | 9.0 | 28 | 4 | 3 | 0.0 min | | routing | 59.2 | 0.0 | 59.2 | 67 | 5 | 1 | 0.0 min | | pours | 4.7 | 0.0 | 4.7 | 16 | 1 | 0 | 0.0 min |+| current | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min | | components | 11.9 | 0.0 | 11.9 | 28 | 1 | 0 | 0.0 min | | design | 2.5 | 0.0 | 2.5 | 11 | 1 | 0 | 0.0 min | | libraries | 1.4 | 0.0 | 1.4 | 6 | 1 | 0 | 0.0 min | | models | 0.6 | 0.0 | 0.6 | 4 | 1 | 0 | 0.0 min |-| outline | 0.0 | 0.0 | 0.0 | 1 | 1 | 0 | 0.0 min |-| rules | 448.9 | 0.0 | 448.9 | 14 | 1 | 0 | 0.0 min |+| outline | 0.1 | 0.0 | 0.1 | 2 | 1 | 0 | 0.0 min |+| rules | 449.0 | 0.0 | 449.0 | 14 | 1 | 0 | 0.0 min | | test-plan | 0.1 | 0.0 | 0.1 | 5 | 1 | 0 | 0.0 min | | thermal-vias | 26.9 | 0.0 | 26.9 | 177 | 4 | 0 | 0.0 min |-| **total** | **567.7** | **0.3** | **567.4** | | | | |+| **total** | **567.9** | **0.3** | **567.6** | | | | |  ## Returns to earlier steps @@ -94,6 +95,7 @@ AI time only, the idle cut out. - 2026-10-09T23:49:09Z capture-start - 2026-10-09T23:52:25Z capture-stop - 2026-10-09T23:56:27Z clip-start:outline-1+- 2026-10-09T23:56:36Z clip-start:current-1  ## Where the board stands @@ -383,12 +385,32 @@ What this step does: pour every net the spec names, keepouts along Kelvin taps,  What this step does: Round the board's corners: every sharp outline corner becomes a radius (1.0 mm by default, spec outline.cornerRadius), so the board is kind to hands, panels and the fab's router. -**Clip: outline, still recording (started 2026-10-09T23:56:27Z); it appears here when the step ends.**+**Clip: outline, the PCB editor from 2026-10-09T23:56:27Z to 2026-10-09T23:56:30Z. Motion only: 0.1 min of real time, 1 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/outline-1.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the outline clip, what the camera saw.**++![nine frames of outline](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/outline-1-sheet.png)  **Screenshot: the board when outline began.**  ![the board when outline began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-outline-1-start.png) +**Screenshot: the board when outline ended.**++![the board when outline ended](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-outline-1-end.png)++### current++What this step does: IPC-2221 on every loaded net, pour and via capacity, the same-layer rule; then the AI's own current density drawing and a walkthrough of the pours it judged++**Clip: current, still recording (started 2026-10-09T23:56:36Z); it appears here when the step ends.**++**Screenshot: the board when current began.**++![the board when current began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-current-1-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.