Adom Custom Electronic Load

@@ -1,6 +1,6 @@ # AI Flow run: codex on board-0 -**Running**: step `placement`, 323.5 min of AI time since the prompt (2643.4 min on the wall clock). This page updates at every step change.+**Running**: step `routing`, 338.6 min of AI time since the prompt (2658.5 min on the wall clock). This page updates at every step change.  Prompt at 2026-10-07T17:49:14Z (UTC). Flow: board. Every number here is from the run's append-only ledger (run.jsonl). AI time is the time the AI was working on a prompt: from the human's prompt to the AI's done, with any gap over 15 min where no command ran (unobserved, not proven idle) cut out. @@ -18,8 +18,8 @@ One row per human prompt: the AI's time on it, unobserved gaps excluded by the h | 6 | 2026-10-09T10:28:54Z | (open) | 13.9 | 35 | Continue electronic-load engineering through AIFlow, with real dashboard progress and clip | | 7 | 2026-10-09T11:18:03Z | (open) | 4.6 | 69 | Keep going on AIFlow: continue electronic-load engineering and recorded board work. | | 8 | 2026-10-09T12:31:28Z | (open) | 24.5 | 31 | Resume the electronic load through all AIFlow design gates after dashboard corrections; co |-| 9 | 2026-10-09T13:26:48Z | (open) | 25.9 | 0 | Continue original electronic-load objective. Compact 5 W prototype is the working basis fr |-| **all** | | | **323.5** | | |+| 9 | 2026-10-09T13:26:48Z | (open) | 41.0 | 0 | Continue original electronic-load objective. Compact 5 W prototype is the working basis fr |+| **all** | | | **338.6** | | |  ## Per step @@ -28,16 +28,16 @@ AI time only, the idle cut out. | Step | AI min | AI thinking min | Tool min | Turns | Visits | Returns | Longest think | |---|---|---|---|---|---|---|---| | intake | 2.6 | 0.3 | 2.2 | 3 | 1 | 0 | 0.3 min |-| placement | 3.9 | 0.0 | 3.9 | 9 | 3 | 2 | 0.0 min |-| routing | 46.2 | 0.0 | 46.2 | 42 | 3 | 1 | 0.0 min |+| placement | 7.6 | 0.0 | 7.6 | 21 | 3 | 2 | 0.0 min |+| routing | 46.2 | 0.0 | 46.2 | 43 | 4 | 1 | 0.0 min | | components | 11.9 | 0.0 | 11.9 | 28 | 1 | 0 | 0.0 min | | design | 2.5 | 0.0 | 2.5 | 11 | 1 | 0 | 0.0 min | | libraries | 1.4 | 0.0 | 1.4 | 6 | 1 | 0 | 0.0 min | | models | 0.6 | 0.0 | 0.6 | 4 | 1 | 0 | 0.0 min |-| rules | 249.6 | 0.0 | 249.6 | 14 | 1 | 0 | 0.0 min |+| rules | 261.0 | 0.0 | 261.0 | 14 | 1 | 0 | 0.0 min | | test-plan | 0.1 | 0.0 | 0.1 | 5 | 1 | 0 | 0.0 min | | thermal-vias | 4.8 | 0.0 | 4.8 | 65 | 2 | 0 | 0.0 min |-| **total** | **323.5** | **0.3** | **323.2** | | | | |+| **total** | **338.6** | **0.3** | **338.3** | | | | |  ## Returns to earlier steps @@ -63,12 +63,13 @@ AI time only, the idle cut out. - 2026-10-09T12:54:19Z clip-start:thermal-vias-2 - 2026-10-09T12:55:03Z capture-stop - 2026-10-09T13:52:39Z clip-start:placement-3+- 2026-10-09T13:53:08Z capture-stop+- 2026-10-09T14:02:23Z capture-start+- 2026-10-09T14:03:16Z capture-stop+- 2026-10-09T14:07:44Z clip-start:routing-4  ## Where the board stands -- routing: 0 unrouted after null passes-- gate: 0 new DRC errors, 0 unconnected, null inherited-- landed live: 0 of 0 route entries  ## The steps on camera @@ -252,19 +253,35 @@ What this step does: place the parts for routability, current and heat; the bina  Why the AI came back here: Make room for offset cooling while preserving probe access: relocate TP4, TP8 and fan connector after isolated native zero-error zero-open gate -**Clip: placement, visit 3 (rework), still recording (started 2026-10-09T13:52:39Z); it appears here when the step ends.**+**Clip: placement, visit 3 (rework), the PCB editor from 2026-10-09T13:52:39Z to 2026-10-09T13:53:08Z. Motion only: 0.5 min of real time, 3 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/placement-3.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the placement, visit 3 (rework) clip, what the camera saw.**++![nine frames of placement, visit 3 (rework)](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/placement-3-sheet.png)  **Screenshot: the board when placement, visit 3 (rework) began.**  ![the board when placement, visit 3 (rework) began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-placement-3-start.png) +### routing, visit 4++What this step does: route to 100 percent with the spec's rules, gate with KiCad's DRC, land as undo steps; the AI takes it with take route=ai++**Clip: routing, visit 4, still recording (started 2026-10-09T14:07:44Z); it appears here when the step ends.**++**Screenshot: the board when routing, visit 4 began.**++![the board when routing, visit 4 began](/blob/app/adom-custom-electronic-load/docs/runs/board-codex-20261007-1749/shot-routing-4-start.png)+ ## Plan usage, the second cost line  Percent of each plan limit used, as the provider reports it, at the start of the run and at its end.  | Provider | Limit | At start | At end | Used by this run | |---|---|---|---|---|-| claude | 5h | 17 % | 9 % | -8.0 % |+| claude | 5h | 17 % | 12 % | -5.0 % | | claude | Fable | 0 % | 3 % | 3.0 % | | claude | week | 54 % | 68 % | 14.0 % | | codex | week | 2 % | 26 % | 24.0 % |