Adom Custom Electronic Load

@@ -17,3 +17,5 @@ The architecture uses an IXTP15N50L2 linear MOSFET, four-terminal 20 mΩ shunt, Read the [engineering status](docs/status.md), [placement review](docs/placement-review.md), [cost breakdown](docs/cost/README.md), [firmware/control-panel contract](docs/firmware-contract.md), and [raw clip log](videos/shotlog.json). The [AI Flow report](docs/runs/board-codex-20261007-1749/README.md) records the run.  The 3rdPartyFab two-layer rules are loaded. Native DRC, current/thermal analysis, the cooling assembly, physical calibration and industrial qualification must pass before production use. No hardware has been built or ordered.++[Build clips and review notes](docs/build-clips.md)

@@ -0,0 +1,21 @@+# Electronic load build clips++These are reviewed process excerpts, not the final narrated video. The target edit is 4-5 minutes. This board is an engineering prototype and is not fabricated or qualified.++## 1. Correcting the capacitor placement++Three real native KiCad moves after DRC caught collisions. Six-second excerpt at normal speed; the raw take is retained locally. The next complete DRC found zero violations and 218 unconnected items. Routing remains unfinished.++<video controls preload="metadata" poster="docs/clips/placement-correction-poster.jpg" src="docs/clips/placement-correction.mp4"></video>++![Raw take contact sheet](docs/clips/placement-correction-sheet.jpg)++## 2. Inspecting the populated board in 3D++Native KiCad orbit and side views, at normal speed. USB now faces out of the board. Side view confirms upright header pins. This is placement review footage: no heatsink, fan, routes or measured hardware performance are shown.++<video controls preload="metadata" poster="docs/clips/placement-3d-review-poster.jpg" src="docs/clips/placement-3d-review.mp4"></video>++![3D review contact sheet](docs/clips/placement-3d-review-sheet.jpg)++Raw source, recorder timing caveats and review notes are indexed in [the shot log](../videos/shotlog.json). [AI Flow clips](clips.md) retain the earlier automatic captures, including excluded static footage.

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

@@ -21,6 +21,22 @@       "topic": "Static component setup",       "status": "exclude from final demo: contact sheet has no meaningful construction action",       "duration_s": 38.6+    },+    {+      "id": "placement-correction-04",+      "file": "raw/window-591672-20261008-113647.mp4",+      "topic": "Native capacitor moves following DRC rejection",+      "status": "contact sheet reviewed; moves visible; trim static lead-in; final edit not approved",+      "duration_wall_s": 18.853,+      "note": "Three real native footprint moves. Recorder timeline repair warning retained; derive edit timing from decoded media."+    },+    {+      "id": "placement-3d-05",+      "file": "raw/window-393534-20261008-113747.mp4",+      "topic": "Native 3D placement review with orbit and side views",+      "status": "contact sheet reviewed; board and changing views visible; final edit not approved",+      "duration_wall_s": 9.711,+      "note": "Unrouted board, no cooling assembly. Header side view confirms upright pins; generic package dimensional audit remains."     }   ],   "failed_captures": [@@ -31,4 +47,4 @@       "status": "not a usable captured clip"     }   ]-}\ No newline at end of file+}