← All Pull Requests

§4: solder paste jet layer — what the embed already bakes, and the two rules around it #2

Open opened by Ray

Adds a "Solder paste jet layer (300 µm dots)" paragraph to §4 Build the CAD.

Why: John's AI built ~40 component pages and the question came up whether the skill tells the AI to produce the jet-dot layer. It does, implicitly: adom-footprint embed bakes the dispensing positions (0.30 mm dots on a fixed pitch, 0.06 mm inset, 0.55 mm keep-out around exposed-pad thermal vias, cap 600) as the viewer's "Solder paste jet" layer. This makes that explicit so nobody asks a model to invent a dot pattern or hand-places dots, and adds two rules: record the datasheet's exposed-pad paste coverage in Provenance when it exists, and ship the machine-readable plan (adom-footprint paste --file part.kicad_mod --out part.paste.json, adom-footprint PR #1) once the installed version has the subcommand.

No other text changed.

🤖 Generated with Claude Code

Diff Skip to comments

--- a/SKILL.md+++ b/SKILL.md@@ -1,317 +1,337 @@⋯ 154 unchanged lines ⋯  > **`adom-footprint` 1.0.20 ships the fab, silk and courtyard layer groups EMPTY** (both `embed` and `render`), so the component outline is invisible and you get floating pads with no body. `scripts/inject_layers.py` parses the `.kicad_mod` graphics and fills them, and widens the viewBox (which is computed from copper only, so courtyards clip). Tracked as adom/adom-footprint#2. Drop the workaround once that lands. +**Solder paste jet layer (300 µm dots).** Adom jets paste dot by dot (Essemtec Puma, VDST-1560+valve), so a component page carries the dispensing positions, not just the F.Paste stencil+aperture. `adom-footprint embed` computes and bakes them for you: a grid of 0.30 mm dots on a+fixed pitch, inset 0.06 mm from every SMD paste aperture, dropped where a dot would sit over+an exposed-pad thermal via (0.55 mm keep-out), capped at 600. They appear in the viewer's+Layers panel as **"Solder paste jet"** (off by default; the "Paste apertures" layer is the+stencil view). Nothing to draw or decide: do not ask the AI to invent a dot pattern, and do+not hand-place dots. Two rules:++- **Exposed pads:** the dots land in the via gaps by design; if the datasheet's stencil+  recommendation gives a paste coverage (%) for the thermal pad, put that number in the+  Provenance section so the placer can window it. No number in the datasheet: say so.+- **Machine data:** the embed is a picture. `adom-footprint paste --file part.kicad_mod+  --out part.paste.json` exports the same positions as data (footprint-local mm, KiCad +y+  down, with the constants and the via keep-outs) for a placer to turn into board+  coordinates (`adom-footprint` PR #1, 2026-09-17; ship the JSON beside the `.kicad_mod`+  once your installed version has the subcommand). Until then the overlay is the reference+  and the board tool derives its program from the board's paste layer.+ **Do NOT ship generated Fusion `.lbr` or Altium `.IntLib`/`.SchLib`/`.PcbLib`.** They are generated rather than hand-verified and the Altium symbol encoder has produced wrong geometry before. Ship the placeholder from §6 instead. Generated-but-unchecked CAD on a public page is worse than a gap, because a reader assumes it was verified.  ---⋯ 154 unchanged lines ⋯ | `scripts/inject_layers.py` | Fills the empty fab/silk/courtyard groups in an adom-footprint embed | | `scripts/build_switcher.py` | Wraps N footprint embeds into one package switcher | | `reference/worked-example.md` | The AMS1117 build end to end, every command in order |+

Comments

No comments yet.

Log in to comment.