AI Flow

@@ -8,7 +8,7 @@ Prompt at 2026-09-14T02:09:45Z (UTC). Flow: board. Every number here is from the  **The final cut of this run, 117 s: only the moments something moved, every step in order, the AI's analysis drawings fullscreen, the run and step clocks in the corner, the words cut to the picture.** -<video width="100%" controls><source src="/blob/app/adom-aiflow/docs/runs/board-claude-fable-5-1-20260914/final-20260914154644.mp4" type="video/mp4"></video>+<video width="100%" controls><source src="/blob/app/adom-aiflow/docs/runs/board-claude-fable-5-1-20260914/final-20260914161608.mp4" type="video/mp4"></video>  ## Per step @@ -20,11 +20,11 @@ Prompt at 2026-09-14T02:09:45Z (UTC). Flow: board. Every number here is from the | pours | 10.1 | 3.0 | 7.1 | 20 | 2 | 1 | 1.3 min | | current | 1.3 | 0.0 | 1.3 | 6 | 2 | 1 | 0.0 min | | thermal | 2.2 | 0.8 | 1.4 | 11 | 4 | 2 | 0.5 min |-| finish | 773.6 | 4.5 | 769.0 | 39 | 6 | 0 | 3.8 min |+| finish | 778.0 | 4.5 | 773.4 | 42 | 6 | 0 | 3.8 min | | 3d | 5.5 | 0.0 | 5.5 | 4 | 3 | 1 | 0.0 min | | models | 10.8 | 0.0 | 10.8 | 3 | 1 | 0 | 0.0 min | | nets | 1.1 | 0.0 | 1.1 | 5 | 2 | 2 | 0.0 min |-| **total** | **842.0** | **27.5** | **814.5** | | | | |+| **total** | **846.4** | **27.5** | **818.9** | | | | |  ## Returns to earlier steps @@ -114,6 +114,8 @@ Prompt at 2026-09-14T02:09:45Z (UTC). Flow: board. Every number here is from the - 2026-09-14T16:11:32Z artifact analysis-image for thermal-4: Heat flow in the copper, the AI's own four-layer heat solve read on F.Cu and B.Cu like the current picture: each hot tab's watts spreading along its layer and going down its vias, the vias drawn. Q5 sends 35 percent of its heat down three vias; Q3 has no thermal via within 3 mm and sends none, so it is the hottest tab. - 2026-09-14T16:11:32Z artifact analysis-image for thermal-4: Temperature rise over the board, the same four-layer solve read as temperature on the top face, the FR4 spreading: 4.1 W from the seven hot tabs plus 3 W of Joule loss. In still air the FET tabs sit 105 to 121 degrees above ambient, over the 60 degree budget; in moving air the peak is far lower. - 2026-09-14T16:11:45Z clip-start:finish-6+- 2026-09-14T16:11:50Z capture-stop+- 2026-09-14T16:16:08Z compose: the delivered video replaced by the composed cut (motion only, the ledger's overlays, the AI's drawings, narration cut to the picture); the clock of record unchanged  ## Where the board stands @@ -609,7 +611,13 @@ Why the AI came back here: the heat analysis now has two drawings: the heat flow  What this step does: finish refuses until everything is true; the AI cuts the video and delivers -**Clip: finish, visit 6, still recording (started 2026-09-14T16:11:45Z); it appears here when the step ends.**+**Clip: finish, visit 6, the PCB editor from 2026-09-14T16:11:45Z to 2026-09-14T16:11:50Z. Motion only: 0.1 min of real time, 0 s of it had something moving; the clock in the corner is the real elapsed time.**++<video width="100%" controls><source src="/blob/app/adom-aiflow/docs/runs/board-claude-fable-5-1-20260914/finish-6.mp4" type="video/mp4"></video>++**Contact sheet: nine frames spread through the finish, visit 6 clip, what the camera saw.**++![nine frames of finish, visit 6](/blob/app/adom-aiflow/docs/runs/board-claude-fable-5-1-20260914/finish-6-sheet.png)  **Screenshot: the board when finish, visit 6 began.** 

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯

⋯ 1 unchanged line ⋯