AI Flow

@@ -1,9 +1,11 @@ --- name: aiflow-test-plan description: >--  The test-plan step of an adom-aiflow run: before the schematic is drawn, think through how the built board will be tested on the Adom probing workcell (the rails, the switch node, feedback, ripple, enable, power-good, every LED, the ground pin), write tests.json, and let `adom-aiflow testplan check` give every measurement a real probe spot, adding 0.5 mm round test points (adom/testpoint-pad-0-5mm) for the gaps; then check the landings again on the placed and finished board. Trigger words: test plan, test points, probe points, probing workcell, design for test, DFT, where will we probe, TP, testpoint, probe spot, bring-up measurements, what should we measure.+  Use when an adom-aiflow run reaches its test-plan step, or whenever someone asks where the board will be probed. The test-plan step of an adom-aiflow run: before the schematic is drawn, think through how the built board will be tested on the Adom probing workcell (the rails, the switch node, feedback, ripple, enable, power-good, every LED, the ground pin), write tests.json, and let `adom-aiflow testplan check` give every measurement a real probe spot, adding 0.5 mm round test points (adom/testpoint-pad-0-5mm) for the gaps; then check the landings again on the placed and finished board. Trigger words: test plan, test points, probe points, probing workcell, design for test, DFT, where will we probe, TP, testpoint, probe spot, bring-up measurements, what should we measure. --- +Parent skill: **adom-aiflow**+ # aiflow-test-plan: decide what you will measure, then make sure you can  Every Adom board goes to the probing workcell after it is built: a gantry lands a pogo-tipped scope