ADM2582E

@@ -1,8 +1,11 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "adm2582",+  "title": "ADM2582E",+  "brief": "ADI isolated RS-485/RS-422 transceiver with integrated isolated power, SOIC-20W. 5 kVrms, up to 16 Mbps. Datasheet-verified.",   "version": "0.1.0",-  "type": "component",-  "description": "ADI isolated RS-485/RS-422 transceiver with integrated isolated power, SOIC-20W. 5 kVrms, up to 16 Mbps. Datasheet-verified.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "interface",@@ -12,6 +15,194 @@     "soic-20",     "analog-devices"   ],+  "component": {+    "mpn": "ADM2582",+    "manufacturer": "Analog Devices",+    "package": "SOIC-20W",+    "pin_count": 20,+    "category": "Interface",+    "subcategory": "Isolated RS-485",+    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM2582E-2587E.pdf",+    "parts": {+      "symbol": "adm2582.kicad_sym",+      "footprint": "adm2582.kicad_mod",+      "model_3d": "adm2582.glb",+      "model_3d_step": "adm2582.step",+      "lbr": "adm2582.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "GND1",+        "type": "power_in",+        "description": "Ground, logic side. Reference for the logic-side VCC supply and all logic-side signals (RxD, TxD, DE, RE)."+      },+      {+        "number": "2",+        "name": "VCC",+        "type": "power_in",+        "description": "Logic side power supply, 3.0 V to 5.5 V. A 0.1 \u00b5F and a 0.01 \u00b5F decoupling capacitor should be fitted between Pin 2 and Pin 1."+      },+      {+        "number": "3",+        "name": "GND1",+        "type": "power_in",+        "description": "Ground, logic side."+      },+      {+        "number": "4",+        "name": "RxD",+        "type": "output",+        "description": "Receiver output data. Output is high when (A \u2212 B) \u2265 \u221230 mV and low when (A \u2212 B) \u2264 \u2212200 mV. Tristated when the receiver is disabled (RE driven high)."+      },+      {+        "number": "5",+        "name": "RE",+        "type": "input",+        "description": "Receiver enable input, active low. Driving this input low enables the receiver; driving it high disables the receiver (RxD tristated)."+      },+      {+        "number": "6",+        "name": "DE",+        "type": "input",+        "description": "Driver enable input, active high. Driving this input high enables the differential driver; driving it low disables the driver (Y, Z high impedance)."+      },+      {+        "number": "7",+        "name": "TxD",+        "type": "input",+        "description": "Driver input. Data to be transmitted by the driver is applied to this input."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Logic side power supply, 3.0 V to 5.5 V. A 0.1 \u00b5F and a 10 \u00b5F decoupling capacitor should be fitted between Pin 8 and Pin 9."+      },+      {+        "number": "9",+        "name": "GND1",+        "type": "power_in",+        "description": "Ground, logic side."+      },+      {+        "number": "10",+        "name": "GND1",+        "type": "power_in",+        "description": "Ground, logic side."+      },+      {+        "number": "11",+        "name": "GND2",+        "type": "power_in",+        "description": "Ground for isolated dc-to-dc converter, bus side. Connect Pin 11 and Pin 14 together through one ferrite bead to PCB ground."+      },+      {+        "number": "12",+        "name": "VISOOUT",+        "type": "power_out",+        "description": "Isolated power supply output, typically 3.3 V. Must be connected externally to VISOIN (Pin 19). A 10 \u00b5F reservoir capacitor and a 0.1 \u00b5F decoupling capacitor should be fitted between Pin 12 and Pin 11."+      },+      {+        "number": "13",+        "name": "Y",+        "type": "output",+        "description": "Driver noninverting differential output to the RS-485/RS-422 bus."+      },+      {+        "number": "14",+        "name": "GND2",+        "type": "power_in",+        "description": "Ground for isolated dc-to-dc converter, bus side. Connect Pin 11 and Pin 14 together through one ferrite bead to PCB ground."+      },+      {+        "number": "15",+        "name": "Z",+        "type": "output",+        "description": "Driver inverting differential output to the RS-485/RS-422 bus."+      },+      {+        "number": "16",+        "name": "GND2",+        "type": "power_in",+        "description": "Ground, bus side. Do not connect this pin to Pin 14 and Pin 11 (isolated dc-to-dc converter ground)."+      },+      {+        "number": "17",+        "name": "B",+        "type": "input",+        "description": "Receiver inverting differential input from the RS-485/RS-422 bus."+      },+      {+        "number": "18",+        "name": "A",+        "type": "input",+        "description": "Receiver noninverting differential input from the RS-485/RS-422 bus."+      },+      {+        "number": "19",+        "name": "VISOIN",+        "type": "power_in",+        "description": "Isolated power supply input to the transceiver. Must be connected externally to VISOOUT (Pin 12) through a ferrite bead and short trace length. A 0.1 \u00b5F and a 0.01 \u00b5F decoupling capacitor should be fitted between Pin 19 and Pin 20."+      },+      {+        "number": "20",+        "name": "GND2",+        "type": "power_in",+        "description": "Ground, bus side."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADM2582E-2587E.pdf",+        "pages": 22,+        "sha256": "77a52a9e60364895",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Type": "Isolated RS-485 / RS-422 transceiver",+      "Isolation": "5 kVrms (iCoupler)",+      "Isolated power": "Integrated isoPower DC-DC",+      "Data rate": "Up to 16 Mbps",+      "Bus protection": "Fault-protected",+      "Supply": "3.3 V or 5 V (logic side)",+      "Package": "SOIC-20W"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "adm2582",+    "isolated rs-485 transceiver",+    "rs485 with isolated power",+    "isopower rs485"+  ],+  "discovery_pitch": "ADI ADM2582E isolated RS-485 transceiver with integrated isolated power (SOIC-20W) with datasheet-verified pinout, KiCad symbol/footprint/3D, and full provenance.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -29,10 +220,5 @@     "docs/adm2582-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file