component
ADA4432-1WBCPZ-R7
Public Made by Adomby adom
Analog Devices Video Amplifiers, LFCSP-WD-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+2441
README.md+86ada4432-1wbcpz-r7-etched.glbada4432-1wbcpz-r7-hero.glbada4432-1wbcpz-r7-hero.overlay.json+273ada4432-1wbcpz-r7.glbada4432-1wbcpz-r7.kicad_mod+343ada4432-1wbcpz-r7.kicad_sym+49ada4432-1wbcpz-r7.lbr+133ada4432-1wbcpz-r7.step+1149docs/ada4432-1wbcpz-r7-datasheet.pdfdocs/hero.pngpackage.json+200page.json+206viewers/footprint.html+1viewers/symbol.html+1README.mdadded+86@@ -0,0 +1,86 @@+# ADA4432-1WBCPZ-R7++**Analog Devices** · Video Amplifiers · LFCSP-WD-8++ADA4432-1WBCPZ-R7 from Analog Devices, in a LFCSP-WD-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No connect; do not connect to this pin. |+| 2 | STB | output | Short-to-battery indicator output; logic high indicates a short-to-battery condition and logic low indicates normal operation. |+| 3 | +VS | power_in | Positive power supply (2.6 V to 3.6 V operating range); bypass with a 0.1 µF capacitor to GND. |+| 4 | OUT | output | Amplifier output, protected against short-to-battery overvoltage up to 18 V and short to ground. |+| 5 | NC | unconnected | No connect; do not connect to this pin. |+| 6 | GND | power_in | Power supply ground pin. |+| 7 | ENA | input | Enable function; connect to +VS or float for normal operation, connect to GND to disable the device (internally pulled up to +VS through 250 kΩ). |+| 8 | IN | input | Amplifier input; input voltage range is typically 0 to 1.4 V. |+| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Analog Devices |+| Package | LFCSP-WD-8 |+| Category | Operational Amplifier/Comparator |+| Pins | 9 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| -3 dB Large Signal Bandwidth | | 9.3 | 10.5 | | MHz | VOUT = 2 V p-p | 3 |+| -3 dB Large Signal Bandwidth (W, TMIN to TMAX) | | 8.6 | | | MHz | ADA4432-1W only: TMIN to TMAX | 3 |+| 1 dB Flatness | | 8.3 | 9.4 | | MHz | VOUT = 2 V p-p | 3 |+| 1 dB Flatness (W, TMIN to TMAX) | | 7.6 | | | MHz | ADA4432-1W only: TMIN to TMAX | 3 |+| Out-of-Band Rejection | | 37 | 43 | | dB | f = 27 MHz, VOUT = 2 V p-p | 3 |+| Out-of-Band Rejection (W, TMIN to TMAX) | | 35 | | | dB | ADA4432-1W only: TMIN to TMAX | 3 |+| Pass Band Gain | | 5.8 | 6 | 6.24 | dB | | 3 |+| Pass Band Gain (W, TMIN to TMAX) | | 5.57 | | 6.44 | dB | ADA4432-1W only: TMIN to TMAX | 3 |+| Input Voltage Range (0 to value) | | 1.34 | 1.4 | 1.45 | V | Limited by the output voltage range; printed 0 to 1.34 / 0 to 1.4 / 0 to 1.45 | 3 |+| Input Voltage Range (W, TMIN to TMAX) | | 1.3 | | 1.47 | V | ADA4432-1W only: TMIN to TMAX; printed 0 to 1.3 / 0 to 1.47 | 3 |+| Output Offset Voltage | | | 192 | 280 | mV | VIN = 0 V | 3 |+| Output Offset Voltage (W, TMIN to TMAX) | | | | 300 | mV | ADA4432-1W only: TMIN to TMAX | 3 |+| Output Voltage Swing | | 0.28 | | | V | RL = 150 Ω; max printed +VS − 0.42 | 3 |+| Output Voltage Swing (W, TMIN to TMAX) | | 0.3 | | | V | ADA4432-1W only: TMIN to TMAX; max printed +VS − 0.45 | 3 |+| Overvoltage Protection Range | | | | 18 | V | printed +VS to 18 V | 3 |+| STB Output Trigger Threshold | | 6.3 | 7.2 | 8.1 | V | Back termination = 75 Ω | 3 |+| STB Output Trigger Threshold (W, TMIN to TMAX) | | 6 | | 8.4 | V | ADA4432-1W only: TMIN to TMAX | 3 |+| Power Supply Range | +VS | 2.6 | | 3.6 | V | Recommended range for optimal performance | 3 |+| Quiescent Current | | | 7.6 | 10 | mA | No input signal, no load | 3 |+| Quiescent Current (W, TMIN to TMAX) | | | | 13 | mA | ADA4432-1W only: TMIN to TMAX | 3 |+| Quiescent Current, Disabled | | | 14 | 20 | µA | ENA = 0 V | 3 |+| Quiescent Current, Disabled (W, TMIN to TMAX) | | | | 25 | µA | ADA4432-1W only: TMIN to TMAX | 3 |+| ENA VIH | VIH | 2.4 | | | V | Input voltage to enable device | 4 |+| ENA VIL | VIL | | | 0.6 | V | Input voltage to disable device | 4 |+| Operating Temperature Range | | -40 | | 125 | °C | | 4 |+| Supply Voltage | | | | 4 | V | | 6 |+| Output Common-Mode Voltage | | | | 22 | V | | 6 |+| Storage Temperature Range | | -65 | | 125 | °C | | 6 |+| Operating Temperature Range (abs max table) | | -40 | | 125 | °C | | 6 |+| Lead Temperature | | | | 260 | °C | Soldering, 10 sec | 6 |+| Junction Temperature | TJ | | | 150 | °C | | 6 |+| Thermal Resistance Junction-to-Ambient, 8-Lead LFCSP | θJA | | 50 | | °C/W | 4-layer (2s2p) board, EIA/JESD 51-7 | 6 |+| Thermal Resistance Junction-to-Case, 8-Lead LFCSP | θJC | | 5 | | °C/W | | 6 |+| 0.1 dB Flatness | | | 3.3 | | MHz | VOUT = 2 V p-p | 3 |++## CAD (KiCad official)++- Symbol: `ADA4432-1WBCPZ-R7`+- Footprint: `Package_CSP:LFCSP-WD-8-1EP_3x3mm_P0.65mm_EP1.6x2.44mm`+- 3D model: LFCSP-WD-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.35 mm nominal DSBGA height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `ada4432-1wbcpz-r7-etched.step` / `ada4432-1wbcpz-r7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ada4432-1wbcpz-r7.step` / `ada4432-1wbcpz-r7.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADA4432-1_4433-1.pdf) (24 pp, sha256 `1af22196e01fde44`, retrieved 2026-10-30, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ada4432-1wbcpz-r7-datasheet.pdf)
ada4432-1wbcpz-r7-etched.glbadded⋯ 1 unchanged line ⋯
ada4432-1wbcpz-r7-hero.glbadded⋯ 1 unchanged line ⋯
ada4432-1wbcpz-r7-hero.overlay.jsonadded+273@@ -0,0 +1,273 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "ADA4432-1WBCPZ-R7",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 9,+ "span_mm": 4.5,+ "dash_mm": 0.12,+ "gap_mm": 0.072,+ "pad_stroke_mm": 0.03+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.015,+ "tolerance_mm": 0.3,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -1.556,+ 1.586,+ -1.079,+ 1.079+ ],+ "pads_bbox_mm": [+ -1.875,+ 1.875,+ -1.22,+ 1.22+ ],+ "seating_z_mm": -0.041+ },+ "sources": {+ "glb": "ada4432-1wbcpz-r7-etched.glb",+ "glb_sha256": "918ca8fd799194f208f8c237d030632dc34cea2f7a7c99f104bec747b22ff0a7",+ "footprint": "ada4432-1wbcpz-r7.kicad_mod",+ "footprint_sha256": "ea84b7ac191812695e29c9a0ac50ab968947fb9c709fe6e61896d5a35145dd95",+ "pins": "page.json component.pins",+ "pins_sha256": "8d834008d1949cd69dff924b2fb4eeabbe60c27e89e9a35c5c5ac6cd2859c761"+ },+ "generator": "adom-wiki 1.8.2 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "NC",+ "x": -2.57,+ "y": -0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "STB",+ "x": -1.975,+ "y": -0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "+VS",+ "x": -1.975,+ "y": 0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "OUT",+ "x": -1.975,+ "y": 0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "NC",+ "x": 1.975,+ "y": 0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "GND",+ "x": 1.975,+ "y": 0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "ENA",+ "x": 1.975,+ "y": -0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "IN",+ "x": 1.975,+ "y": -0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -1.45,+ -0.975+ ],+ "size_mm": [+ 0.85,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -1.45,+ -0.325+ ],+ "size_mm": [+ 0.85,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -1.45,+ 0.325+ ],+ "size_mm": [+ 0.85,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -1.45,+ 0.975+ ],+ "size_mm": [+ 0.85,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 1.45,+ 0.975+ ],+ "size_mm": [+ 0.85,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 1.45,+ 0.325+ ],+ "size_mm": [+ 0.85,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 1.45,+ -0.325+ ],+ "size_mm": [+ 0.85,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 1.45,+ -0.975+ ],+ "size_mm": [+ 0.85,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 1.6,+ 2.44+ ],+ "rot": 0.0+ }+ ]+}
ada4432-1wbcpz-r7.glbadded⋯ 1 unchanged line ⋯
ada4432-1wbcpz-r7.kicad_modadded+343@@ -0,0 +1,343 @@+(footprint "LFCSP-WD-8-1EP_3x3mm_P0.65mm_EP1.6x2.44mm"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "LFCSP-WD, 8 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/CP_8_19.pdf)")+ (tags "LFCSP-WD NoLead")+ (property "Reference" "REF**"+ (at 0 -2.45 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "LFCSP-WD-8-1EP_3x3mm_P0.65mm_EP1.6x2.44mm"+ (at 0 2.45 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/no_lead"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -1.61 -1.61)+ (end 1.61 -1.61)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -1.61 -1.385)+ (end -1.61 -1.61)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -1.61 1.61)+ (end -1.61 1.385)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 1.61 -1.61)+ (end 1.61 -1.385)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 1.61 1.385)+ (end 1.61 1.61)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 1.61 1.61)+ (end -1.61 1.61)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -2.14 -0.98)+ (xy -2.47 -0.74)+ (xy -2.47 -1.22)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_line+ (start -2.13 -1.38)+ (end -1.75 -1.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.13 1.38)+ (end -2.13 -1.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.75 -1.75)+ (end 1.75 -1.75)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.75 -1.38)+ (end -1.75 -1.75)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.75 1.38)+ (end -2.13 1.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.75 1.75)+ (end -1.75 1.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 1.75 -1.75)+ (end 1.75 -1.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 1.75 -1.38)+ (end 2.13 -1.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 1.75 1.38)+ (end 1.75 1.75)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 1.75 1.75)+ (end -1.75 1.75)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.13 -1.38)+ (end 2.13 1.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.13 1.38)+ (end 1.75 1.38)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_poly+ (pts+ (xy -0.75 -1.5)+ (xy 1.5 -1.5)+ (xy 1.5 1.5)+ (xy -1.5 1.5)+ (xy -1.5 -0.75)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 0)+ (layer "F.Fab")+ (effects+ (font+ (size 0.75 0.75)+ (thickness 0.11)+ )+ )+ )+ (pad "" smd roundrect+ (at -0.4 -0.81)+ (size 0.64 0.66)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at -0.4 0)+ (size 0.64 0.66)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at -0.4 0.81)+ (size 0.64 0.66)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at 0.4 -0.81)+ (size 0.64 0.66)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at 0.4 0)+ (size 0.64 0.66)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at 0.4 0.81)+ (size 0.64 0.66)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "1" smd roundrect+ (at -1.45 -0.975)+ (size 0.85 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "2" smd roundrect+ (at -1.45 -0.325)+ (size 0.85 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "3" smd roundrect+ (at -1.45 0.325)+ (size 0.85 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "4" smd roundrect+ (at -1.45 0.975)+ (size 0.85 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "5" smd roundrect+ (at 1.45 0.975)+ (size 0.85 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "6" smd roundrect+ (at 1.45 0.325)+ (size 0.85 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "7" smd roundrect+ (at 1.45 -0.325)+ (size 0.85 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "8" smd roundrect+ (at 1.45 -0.975)+ (size 0.85 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "9" smd rect+ (at 0 0)+ (size 1.6 2.44)+ (property pad_prop_heatsink)+ (layers "F.Cu" "F.Mask")+ (zone_connect 2)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_CSP.3dshapes/LFCSP-WD-8-1EP_3x3mm_P0.65mm_EP1.6x2.44mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
ada4432-1wbcpz-r7.kicad_symadded+49@@ -0,0 +1,49 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "ADA4432-1WBCPZ-R7" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 10.16 0) (effects (font (size 1.27 1.27))))+ (property "Value" "ADA4432-1WBCPZ-R7" (at 0 -10.16 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "ADA4432-1WBCPZ-R7_0_1"+ (rectangle (start -12.70 7.62) (end 12.70 -7.62)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "ADA4432-1WBCPZ-R7_1_1"+ (pin no_connect line (at -17.78 5.08 0) (length 5.08)+ (name "NC" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 2.54 0) (length 5.08)+ (name "STB" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 0.00 0) (length 5.08)+ (name "+VS" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -2.54 0) (length 5.08)+ (name "OUT" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin no_connect line (at -17.78 -5.08 0) (length 5.08)+ (name "NC" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at 17.78 2.54 180) (length 5.08)+ (name "EP" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 0.00 180) (length 5.08)+ (name "IN" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 -2.54 180) (length 5.08)+ (name "ENA" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -5.08 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
ada4432-1wbcpz-r7.lbradded+133@@ -0,0 +1,133 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="LFCSP-WD-8-1EP_3x3mm_P0.65mm_EP1.6x2.44mm">+ <description>LFCSP-WD-8-1EP, 3 x 3 mm, 0.65 mm pitch</description>+ <smd name="1" x="-1.4500" y="0.9750" dx="0.8500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="2" x="-1.4500" y="0.3250" dx="0.8500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="3" x="-1.4500" y="-0.3250" dx="0.8500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="4" x="-1.4500" y="-0.9750" dx="0.8500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="5" x="1.4500" y="-0.9750" dx="0.8500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="6" x="1.4500" y="-0.3250" dx="0.8500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="7" x="1.4500" y="0.3250" dx="0.8500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="8" x="1.4500" y="0.9750" dx="0.8500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="9" x="0.0000" y="-0.0000" dx="1.6000" dy="2.4400" layer="1" cream="no"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-2.1400" y="0.9800"/>+ <vertex x="-2.4700" y="0.7400"/>+ <vertex x="-2.4700" y="1.2200"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.7500" y="1.5000"/>+ <vertex x="1.5000" y="1.5000"/>+ <vertex x="1.5000" y="-1.5000"/>+ <vertex x="-1.5000" y="-1.5000"/>+ <vertex x="-1.5000" y="0.7500"/>+ </polygon>+ <wire x1="-1.6100" y1="1.6100" x2="1.6100" y2="1.6100" width="0.1200" layer="21"/>+ <wire x1="-1.6100" y1="1.3850" x2="-1.6100" y2="1.6100" width="0.1200" layer="21"/>+ <wire x1="-1.6100" y1="-1.6100" x2="-1.6100" y2="-1.3850" width="0.1200" layer="21"/>+ <wire x1="1.6100" y1="1.6100" x2="1.6100" y2="1.3850" width="0.1200" layer="21"/>+ <wire x1="1.6100" y1="-1.3850" x2="1.6100" y2="-1.6100" width="0.1200" layer="21"/>+ <wire x1="1.6100" y1="-1.6100" x2="-1.6100" y2="-1.6100" width="0.1200" layer="21"/>+ <text x="0" y="2.210" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-2.210" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="ADA4432-1WBCPZ-R7">+ <wire x1="-12.7" y1="7.62" x2="12.7" y2="7.62" width="0.254" layer="94"/>+ <wire x1="12.7" y1="7.62" x2="12.7" y2="-7.62" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-7.62" x2="-12.7" y2="7.62" width="0.254" layer="94"/>+ <text x="0.0000" y="10.1600" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-10.1600" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="NC" x="-17.78" y="5.08" length="middle" direction="nc"/>+ <pin name="STB" x="-17.78" y="2.54" length="middle" direction="out"/>+ <pin name="+VS" x="-17.78" y="0" length="middle" direction="pwr"/>+ <pin name="OUT" x="-17.78" y="-2.54" length="middle" direction="out"/>+ <pin name="NC@2" x="-17.78" y="-5.08" length="middle" direction="nc"/>+ <pin name="EP" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/>+ <pin name="IN" x="17.78" y="0" length="middle" direction="in" rot="R180"/>+ <pin name="ENA" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/>+ <pin name="GND" x="17.78" y="-5.08" length="middle" direction="pwr" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="ADA4432-1WBCPZ-R7" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="ADA4432-1WBCPZ-R7" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="LFCSP-WD-8-1EP_3x3mm_P0.65mm_EP1.6x2.44mm">+ <connects>+ <connect gate="G$1" pin="NC" pad="1"/>+ <connect gate="G$1" pin="STB" pad="2"/>+ <connect gate="G$1" pin="+VS" pad="3"/>+ <connect gate="G$1" pin="OUT" pad="4"/>+ <connect gate="G$1" pin="NC@2" pad="5"/>+ <connect gate="G$1" pin="EP" pad="9"/>+ <connect gate="G$1" pin="IN" pad="8"/>+ <connect gate="G$1" pin="ENA" pad="7"/>+ <connect gate="G$1" pin="GND" pad="6"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
ada4432-1wbcpz-r7.stepadded+1149@@ -0,0 +1,1149 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-10-30T20:54:28',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('ADA4432-1WBCPZ-R7','ADA4432-1WBCPZ-R7','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#655,#667,#679,#691,#703,#715,+ #727,#739,#751),#849);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = MANIFOLD_SOLID_BREP('',#16);+#16 = CLOSED_SHELL('',(#17,#137,#218,#299,#348,#397,#429,#478,#562,#589,+ #596,#651));+#17 = ADVANCED_FACE('',(#18),#32,.F.);+#18 = FACE_BOUND('',#19,.F.);+#19 = EDGE_LOOP('',(#20,#55,#83,#111));+#20 = ORIENTED_EDGE('',*,*,#21,.F.);+#21 = EDGE_CURVE('',#22,#24,#26,.T.);+#22 = VERTEX_POINT('',#23);+#23 = CARTESIAN_POINT('',(-1.5,-1.5,0.2475));+#24 = VERTEX_POINT('',#25);+#25 = CARTESIAN_POINT('',(-1.5,-1.5,0.5555));+#26 = SURFACE_CURVE('',#27,(#31,#43),.PCURVE_S1.);+#27 = LINE('',#28,#29);+#28 = CARTESIAN_POINT('',(-1.5,-1.5,0.2475));+#29 = VECTOR('',#30,1.);+#30 = DIRECTION('',(0.,0.,1.));+#31 = PCURVE('',#32,#37);+#32 = PLANE('',#33);+#33 = AXIS2_PLACEMENT_3D('',#34,#35,#36);+#34 = CARTESIAN_POINT('',(-1.5,-1.5,0.2475));+#35 = DIRECTION('',(1.,0.,0.));+#36 = DIRECTION('',(0.,0.,1.));+#37 = DEFINITIONAL_REPRESENTATION('',(#38),#42);+#38 = LINE('',#39,#40);+#39 = CARTESIAN_POINT('',(0.,0.));+#40 = VECTOR('',#41,1.);+#41 = DIRECTION('',(1.,0.));+#42 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#43 = PCURVE('',#44,#49);+#44 = PLANE('',#45);+#45 = AXIS2_PLACEMENT_3D('',#46,#47,#48);+#46 = CARTESIAN_POINT('',(-1.5,-1.5,0.2475));+#47 = DIRECTION('',(0.,1.,0.));+#48 = DIRECTION('',(0.,0.,1.));+#49 = DEFINITIONAL_REPRESENTATION('',(#50),#54);+#50 = LINE('',#51,#52);+#51 = CARTESIAN_POINT('',(0.,0.));+#52 = VECTOR('',#53,1.);+#53 = DIRECTION('',(1.,0.));+#54 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#55 = ORIENTED_EDGE('',*,*,#56,.T.);+#56 = EDGE_CURVE('',#22,#57,#59,.T.);+#57 = VERTEX_POINT('',#58);+#58 = CARTESIAN_POINT('',(-1.5,1.5,0.2475));+#59 = SURFACE_CURVE('',#60,(#64,#71),.PCURVE_S1.);+#60 = LINE('',#61,#62);+#61 = CARTESIAN_POINT('',(-1.5,-1.5,0.2475));+#62 = VECTOR('',#63,1.);+#63 = DIRECTION('',(0.,1.,0.));+#64 = PCURVE('',#32,#65);+#65 = DEFINITIONAL_REPRESENTATION('',(#66),#70);+#66 = LINE('',#67,#68);+#67 = CARTESIAN_POINT('',(0.,0.));+#68 = VECTOR('',#69,1.);+#69 = DIRECTION('',(0.,-1.));+#70 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#71 = PCURVE('',#72,#77);+#72 = PLANE('',#73);+#73 = AXIS2_PLACEMENT_3D('',#74,#75,#76);+#74 = CARTESIAN_POINT('',(-1.5,-1.5,0.2475));+#75 = DIRECTION('',(0.,0.,1.));+#76 = DIRECTION('',(1.,0.,0.));+#77 = DEFINITIONAL_REPRESENTATION('',(#78),#82);+#78 = LINE('',#79,#80);+#79 = CARTESIAN_POINT('',(0.,0.));+#80 = VECTOR('',#81,1.);+#81 = DIRECTION('',(0.,1.));+#82 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#83 = ORIENTED_EDGE('',*,*,#84,.T.);+#84 = EDGE_CURVE('',#57,#85,#87,.T.);+#85 = VERTEX_POINT('',#86);+#86 = CARTESIAN_POINT('',(-1.5,1.5,0.5555));+#87 = SURFACE_CURVE('',#88,(#92,#99),.PCURVE_S1.);+#88 = LINE('',#89,#90);+#89 = CARTESIAN_POINT('',(-1.5,1.5,0.2475));+#90 = VECTOR('',#91,1.);+#91 = DIRECTION('',(0.,0.,1.));+#92 = PCURVE('',#32,#93);+#93 = DEFINITIONAL_REPRESENTATION('',(#94),#98);+#94 = LINE('',#95,#96);+#95 = CARTESIAN_POINT('',(0.,-3.));+#96 = VECTOR('',#97,1.);+#97 = DIRECTION('',(1.,0.));+#98 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#99 = PCURVE('',#100,#105);+#100 = PLANE('',#101);+#101 = AXIS2_PLACEMENT_3D('',#102,#103,#104);+#102 = CARTESIAN_POINT('',(-1.5,1.5,0.2475));+#103 = DIRECTION('',(0.,1.,0.));+#104 = DIRECTION('',(0.,0.,1.));+#105 = DEFINITIONAL_REPRESENTATION('',(#106),#110);+#106 = LINE('',#107,#108);+#107 = CARTESIAN_POINT('',(0.,0.));+#108 = VECTOR('',#109,1.);+#109 = DIRECTION('',(1.,0.));+#110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#111 = ORIENTED_EDGE('',*,*,#112,.F.);+#112 = EDGE_CURVE('',#24,#85,#113,.T.);+#113 = SURFACE_CURVE('',#114,(#118,#125),.PCURVE_S1.);+#114 = LINE('',#115,#116);+#115 = CARTESIAN_POINT('',(-1.5,-1.5,0.5555));+#116 = VECTOR('',#117,1.);+#117 = DIRECTION('',(0.,1.,0.));+#118 = PCURVE('',#32,#119);+#119 = DEFINITIONAL_REPRESENTATION('',(#120),#124);+#120 = LINE('',#121,#122);+#121 = CARTESIAN_POINT('',(0.308,0.));+#122 = VECTOR('',#123,1.);+#123 = DIRECTION('',(0.,-1.));+#124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#125 = PCURVE('',#126,#131);+#126 = PLANE('',#127);+#127 = AXIS2_PLACEMENT_3D('',#128,#129,#130);+#128 = CARTESIAN_POINT('',(-1.479,-1.5,0.5765));+#129 = DIRECTION('',(0.707106781187,0.,-0.707106781187));+#130 = DIRECTION('',(0.,1.,0.));+#131 = DEFINITIONAL_REPRESENTATION('',(#132),#136);+#132 = LINE('',#133,#134);+#133 = CARTESIAN_POINT('',(0.,-2.969848480983E-02));+#134 = VECTOR('',#135,1.);+#135 = DIRECTION('',(1.,0.));+#136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#137 = ADVANCED_FACE('',(#138),#44,.F.);+#138 = FACE_BOUND('',#139,.F.);+#139 = EDGE_LOOP('',(#140,#170,#191,#192));+#140 = ORIENTED_EDGE('',*,*,#141,.F.);+#141 = EDGE_CURVE('',#142,#144,#146,.T.);+#142 = VERTEX_POINT('',#143);+#143 = CARTESIAN_POINT('',(1.5,-1.5,0.2475));+#144 = VERTEX_POINT('',#145);+#145 = CARTESIAN_POINT('',(1.5,-1.5,0.5555));+#146 = SURFACE_CURVE('',#147,(#151,#158),.PCURVE_S1.);+#147 = LINE('',#148,#149);+#148 = CARTESIAN_POINT('',(1.5,-1.5,0.2475));+#149 = VECTOR('',#150,1.);+#150 = DIRECTION('',(0.,0.,1.));+#151 = PCURVE('',#44,#152);+#152 = DEFINITIONAL_REPRESENTATION('',(#153),#157);+#153 = LINE('',#154,#155);+#154 = CARTESIAN_POINT('',(0.,3.));+#155 = VECTOR('',#156,1.);+#156 = DIRECTION('',(1.,0.));+#157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#158 = PCURVE('',#159,#164);+#159 = PLANE('',#160);+#160 = AXIS2_PLACEMENT_3D('',#161,#162,#163);+#161 = CARTESIAN_POINT('',(1.5,-1.5,0.2475));+#162 = DIRECTION('',(1.,0.,0.));+#163 = DIRECTION('',(0.,0.,1.));+#164 = DEFINITIONAL_REPRESENTATION('',(#165),#169);+#165 = LINE('',#166,#167);+#166 = CARTESIAN_POINT('',(0.,0.));+#167 = VECTOR('',#168,1.);+#168 = DIRECTION('',(1.,0.));+#169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#170 = ORIENTED_EDGE('',*,*,#171,.F.);+#171 = EDGE_CURVE('',#22,#142,#172,.T.);+#172 = SURFACE_CURVE('',#173,(#177,#184),.PCURVE_S1.);+#173 = LINE('',#174,#175);+#174 = CARTESIAN_POINT('',(-1.5,-1.5,0.2475));+#175 = VECTOR('',#176,1.);+#176 = DIRECTION('',(1.,0.,0.));+#177 = PCURVE('',#44,#178);+#178 = DEFINITIONAL_REPRESENTATION('',(#179),#183);+#179 = LINE('',#180,#181);+#180 = CARTESIAN_POINT('',(0.,0.));+#181 = VECTOR('',#182,1.);+#182 = DIRECTION('',(0.,1.));+#183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#184 = PCURVE('',#72,#185);+#185 = DEFINITIONAL_REPRESENTATION('',(#186),#190);+#186 = LINE('',#187,#188);+#187 = CARTESIAN_POINT('',(0.,0.));+#188 = VECTOR('',#189,1.);+#189 = DIRECTION('',(1.,0.));+#190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#191 = ORIENTED_EDGE('',*,*,#21,.T.);+#192 = ORIENTED_EDGE('',*,*,#193,.T.);+#193 = EDGE_CURVE('',#24,#144,#194,.T.);+#194 = SURFACE_CURVE('',#195,(#199,#206),.PCURVE_S1.);+#195 = LINE('',#196,#197);+#196 = CARTESIAN_POINT('',(-1.5,-1.5,0.5555));+#197 = VECTOR('',#198,1.);+#198 = DIRECTION('',(1.,0.,0.));+#199 = PCURVE('',#44,#200);+#200 = DEFINITIONAL_REPRESENTATION('',(#201),#205);+#201 = LINE('',#202,#203);+#202 = CARTESIAN_POINT('',(0.308,0.));+#203 = VECTOR('',#204,1.);+#204 = DIRECTION('',(0.,1.));+#205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#206 = PCURVE('',#207,#212);+#207 = PLANE('',#208);+#208 = AXIS2_PLACEMENT_3D('',#209,#210,#211);+#209 = CARTESIAN_POINT('',(-1.5,-1.479,0.5765));+#210 = DIRECTION('',(0.,0.707106781187,-0.707106781187));+#211 = DIRECTION('',(-1.,0.,0.));+#212 = DEFINITIONAL_REPRESENTATION('',(#213),#217);+#213 = LINE('',#214,#215);+#214 = CARTESIAN_POINT('',(0.,-2.969848480983E-02));+#215 = VECTOR('',#216,1.);+#216 = DIRECTION('',(-1.,0.));+#217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#218 = ADVANCED_FACE('',(#219),#126,.F.);+#219 = FACE_BOUND('',#220,.F.);+#220 = EDGE_LOOP('',(#221,#244,#245,#273));+#221 = ORIENTED_EDGE('',*,*,#222,.F.);+#222 = EDGE_CURVE('',#24,#223,#225,.T.);+#223 = VERTEX_POINT('',#224);+#224 = CARTESIAN_POINT('',(-1.458,-1.458,0.5975));+#225 = SURFACE_CURVE('',#226,(#230,#237),.PCURVE_S1.);+#226 = LINE('',#227,#228);+#227 = CARTESIAN_POINT('',(-1.486,-1.486,0.5695));+#228 = VECTOR('',#229,1.);+#229 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919));+#230 = PCURVE('',#126,#231);+#231 = DEFINITIONAL_REPRESENTATION('',(#232),#236);+#232 = LINE('',#233,#234);+#233 = CARTESIAN_POINT('',(1.4E-02,-9.899494936612E-03));+#234 = VECTOR('',#235,1.);+#235 = DIRECTION('',(0.57735026919,0.816496580928));+#236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#237 = PCURVE('',#207,#238);+#238 = DEFINITIONAL_REPRESENTATION('',(#239),#243);+#239 = LINE('',#240,#241);+#240 = CARTESIAN_POINT('',(-1.4E-02,-9.899494936612E-03));+#241 = VECTOR('',#242,1.);+#242 = DIRECTION('',(-0.57735026919,0.816496580928));+#243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#244 = ORIENTED_EDGE('',*,*,#112,.T.);+#245 = ORIENTED_EDGE('',*,*,#246,.T.);+#246 = EDGE_CURVE('',#85,#247,#249,.T.);+#247 = VERTEX_POINT('',#248);+#248 = CARTESIAN_POINT('',(-1.458,1.458,0.5975));+#249 = SURFACE_CURVE('',#250,(#254,#261),.PCURVE_S1.);+#250 = LINE('',#251,#252);+#251 = CARTESIAN_POINT('',(-0.986,0.986,1.0695));+#252 = VECTOR('',#253,1.);+#253 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919));+#254 = PCURVE('',#126,#255);+#255 = DEFINITIONAL_REPRESENTATION('',(#256),#260);+#256 = LINE('',#257,#258);+#257 = CARTESIAN_POINT('',(2.486,0.69720728625));+#258 = VECTOR('',#259,1.);+#259 = DIRECTION('',(-0.57735026919,0.816496580928));+#260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#261 = PCURVE('',#262,#267);+#262 = PLANE('',#263);+#263 = AXIS2_PLACEMENT_3D('',#264,#265,#266);+#264 = CARTESIAN_POINT('',(-1.5,1.479,0.5765));+#265 = DIRECTION('',(0.,0.707106781187,0.707106781187));+#266 = DIRECTION('',(-1.,0.,0.));+#267 = DEFINITIONAL_REPRESENTATION('',(#268),#272);+#268 = LINE('',#269,#270);+#269 = CARTESIAN_POINT('',(-0.514,0.69720728625));+#270 = VECTOR('',#271,1.);+#271 = DIRECTION('',(-0.57735026919,0.816496580928));+#272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#273 = ORIENTED_EDGE('',*,*,#274,.F.);+#274 = EDGE_CURVE('',#223,#247,#275,.T.);+#275 = SURFACE_CURVE('',#276,(#280,#287),.PCURVE_S1.);+#276 = LINE('',#277,#278);+#277 = CARTESIAN_POINT('',(-1.458,-1.5,0.5975));+#278 = VECTOR('',#279,1.);+#279 = DIRECTION('',(0.,1.,0.));+#280 = PCURVE('',#126,#281);+#281 = DEFINITIONAL_REPRESENTATION('',(#282),#286);+#282 = LINE('',#283,#284);+#283 = CARTESIAN_POINT('',(0.,2.969848480984E-02));+#284 = VECTOR('',#285,1.);+#285 = DIRECTION('',(1.,0.));+#286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#287 = PCURVE('',#288,#293);+#288 = PLANE('',#289);+#289 = AXIS2_PLACEMENT_3D('',#290,#291,#292);+#290 = CARTESIAN_POINT('',(-1.5,-1.5,0.5975));+#291 = DIRECTION('',(0.,0.,1.));+#292 = DIRECTION('',(1.,0.,0.));+#293 = DEFINITIONAL_REPRESENTATION('',(#294),#298);+#294 = LINE('',#295,#296);+#295 = CARTESIAN_POINT('',(4.2E-02,0.));+#296 = VECTOR('',#297,1.);+#297 = DIRECTION('',(0.,1.));+#298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#299 = ADVANCED_FACE('',(#300),#72,.F.);+#300 = FACE_BOUND('',#301,.F.);+#301 = EDGE_LOOP('',(#302,#303,#304,#327));+#302 = ORIENTED_EDGE('',*,*,#56,.F.);+#303 = ORIENTED_EDGE('',*,*,#171,.T.);+#304 = ORIENTED_EDGE('',*,*,#305,.T.);+#305 = EDGE_CURVE('',#142,#306,#308,.T.);+#306 = VERTEX_POINT('',#307);+#307 = CARTESIAN_POINT('',(1.5,1.5,0.2475));+#308 = SURFACE_CURVE('',#309,(#313,#320),.PCURVE_S1.);+#309 = LINE('',#310,#311);+#310 = CARTESIAN_POINT('',(1.5,-1.5,0.2475));+#311 = VECTOR('',#312,1.);+#312 = DIRECTION('',(0.,1.,0.));+#313 = PCURVE('',#72,#314);+#314 = DEFINITIONAL_REPRESENTATION('',(#315),#319);+#315 = LINE('',#316,#317);+#316 = CARTESIAN_POINT('',(3.,0.));+#317 = VECTOR('',#318,1.);+#318 = DIRECTION('',(0.,1.));+#319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#320 = PCURVE('',#159,#321);+#321 = DEFINITIONAL_REPRESENTATION('',(#322),#326);+#322 = LINE('',#323,#324);+#323 = CARTESIAN_POINT('',(0.,0.));+#324 = VECTOR('',#325,1.);+#325 = DIRECTION('',(0.,-1.));+#326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#327 = ORIENTED_EDGE('',*,*,#328,.F.);+#328 = EDGE_CURVE('',#57,#306,#329,.T.);+#329 = SURFACE_CURVE('',#330,(#334,#341),.PCURVE_S1.);+#330 = LINE('',#331,#332);+#331 = CARTESIAN_POINT('',(-1.5,1.5,0.2475));+#332 = VECTOR('',#333,1.);+#333 = DIRECTION('',(1.,0.,0.));+#334 = PCURVE('',#72,#335);+#335 = DEFINITIONAL_REPRESENTATION('',(#336),#340);+#336 = LINE('',#337,#338);+#337 = CARTESIAN_POINT('',(0.,3.));+#338 = VECTOR('',#339,1.);+#339 = DIRECTION('',(1.,0.));+#340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#341 = PCURVE('',#100,#342);+#342 = DEFINITIONAL_REPRESENTATION('',(#343),#347);+#343 = LINE('',#344,#345);+#344 = CARTESIAN_POINT('',(0.,0.));+#345 = VECTOR('',#346,1.);+#346 = DIRECTION('',(0.,1.));+#347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#348 = ADVANCED_FACE('',(#349),#100,.T.);+#349 = FACE_BOUND('',#350,.T.);+#350 = EDGE_LOOP('',(#351,#374,#375,#376));+#351 = ORIENTED_EDGE('',*,*,#352,.F.);+#352 = EDGE_CURVE('',#306,#353,#355,.T.);+#353 = VERTEX_POINT('',#354);+#354 = CARTESIAN_POINT('',(1.5,1.5,0.5555));+#355 = SURFACE_CURVE('',#356,(#360,#367),.PCURVE_S1.);+#356 = LINE('',#357,#358);+#357 = CARTESIAN_POINT('',(1.5,1.5,0.2475));+#358 = VECTOR('',#359,1.);+#359 = DIRECTION('',(0.,0.,1.));+#360 = PCURVE('',#100,#361);+#361 = DEFINITIONAL_REPRESENTATION('',(#362),#366);+#362 = LINE('',#363,#364);+#363 = CARTESIAN_POINT('',(0.,3.));+#364 = VECTOR('',#365,1.);+#365 = DIRECTION('',(1.,0.));+#366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#367 = PCURVE('',#159,#368);+#368 = DEFINITIONAL_REPRESENTATION('',(#369),#373);+#369 = LINE('',#370,#371);+#370 = CARTESIAN_POINT('',(0.,-3.));+#371 = VECTOR('',#372,1.);+#372 = DIRECTION('',(1.,0.));+#373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#374 = ORIENTED_EDGE('',*,*,#328,.F.);+#375 = ORIENTED_EDGE('',*,*,#84,.T.);+#376 = ORIENTED_EDGE('',*,*,#377,.T.);+#377 = EDGE_CURVE('',#85,#353,#378,.T.);+#378 = SURFACE_CURVE('',#379,(#383,#390),.PCURVE_S1.);+#379 = LINE('',#380,#381);+#380 = CARTESIAN_POINT('',(-1.5,1.5,0.5555));+#381 = VECTOR('',#382,1.);+#382 = DIRECTION('',(1.,0.,0.));+#383 = PCURVE('',#100,#384);+#384 = DEFINITIONAL_REPRESENTATION('',(#385),#389);+#385 = LINE('',#386,#387);+#386 = CARTESIAN_POINT('',(0.308,0.));+#387 = VECTOR('',#388,1.);+#388 = DIRECTION('',(0.,1.));+#389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#390 = PCURVE('',#262,#391);+#391 = DEFINITIONAL_REPRESENTATION('',(#392),#396);+#392 = LINE('',#393,#394);+#393 = CARTESIAN_POINT('',(0.,-2.969848480983E-02));+#394 = VECTOR('',#395,1.);+#395 = DIRECTION('',(-1.,0.));+#396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#397 = ADVANCED_FACE('',(#398),#159,.T.);+#398 = FACE_BOUND('',#399,.T.);+#399 = EDGE_LOOP('',(#400,#401,#402,#403));+#400 = ORIENTED_EDGE('',*,*,#141,.F.);+#401 = ORIENTED_EDGE('',*,*,#305,.T.);+#402 = ORIENTED_EDGE('',*,*,#352,.T.);+#403 = ORIENTED_EDGE('',*,*,#404,.F.);+#404 = EDGE_CURVE('',#144,#353,#405,.T.);+#405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.);+#406 = LINE('',#407,#408);+#407 = CARTESIAN_POINT('',(1.5,-1.5,0.5555));+#408 = VECTOR('',#409,1.);+#409 = DIRECTION('',(0.,1.,0.));+#410 = PCURVE('',#159,#411);+#411 = DEFINITIONAL_REPRESENTATION('',(#412),#416);+#412 = LINE('',#413,#414);+#413 = CARTESIAN_POINT('',(0.308,0.));+#414 = VECTOR('',#415,1.);+#415 = DIRECTION('',(0.,-1.));+#416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#417 = PCURVE('',#418,#423);+#418 = PLANE('',#419);+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);+#420 = CARTESIAN_POINT('',(1.479,-1.5,0.5765));+#421 = DIRECTION('',(0.707106781187,0.,0.707106781187));+#422 = DIRECTION('',(0.,1.,0.));+#423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);+#424 = LINE('',#425,#426);+#425 = CARTESIAN_POINT('',(0.,-2.969848480983E-02));+#426 = VECTOR('',#427,1.);+#427 = DIRECTION('',(1.,0.));+#428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#429 = ADVANCED_FACE('',(#430),#207,.F.);+#430 = FACE_BOUND('',#431,.T.);+#431 = EDGE_LOOP('',(#432,#433,#434,#457));+#432 = ORIENTED_EDGE('',*,*,#222,.F.);+#433 = ORIENTED_EDGE('',*,*,#193,.T.);+#434 = ORIENTED_EDGE('',*,*,#435,.T.);+#435 = EDGE_CURVE('',#144,#436,#438,.T.);+#436 = VERTEX_POINT('',#437);+#437 = CARTESIAN_POINT('',(1.458,-1.458,0.5975));+#438 = SURFACE_CURVE('',#439,(#443,#450),.PCURVE_S1.);+#439 = LINE('',#440,#441);+#440 = CARTESIAN_POINT('',(0.986,-0.986,1.0695));+#441 = VECTOR('',#442,1.);+#442 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919));+#443 = PCURVE('',#207,#444);+#444 = DEFINITIONAL_REPRESENTATION('',(#445),#449);+#445 = LINE('',#446,#447);+#446 = CARTESIAN_POINT('',(-2.486,0.69720728625));+#447 = VECTOR('',#448,1.);+#448 = DIRECTION('',(0.57735026919,0.816496580928));+#449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#450 = PCURVE('',#418,#451);+#451 = DEFINITIONAL_REPRESENTATION('',(#452),#456);+#452 = LINE('',#453,#454);+#453 = CARTESIAN_POINT('',(0.514,0.69720728625));+#454 = VECTOR('',#455,1.);+#455 = DIRECTION('',(0.57735026919,0.816496580928));+#456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#457 = ORIENTED_EDGE('',*,*,#458,.F.);+#458 = EDGE_CURVE('',#223,#436,#459,.T.);+#459 = SURFACE_CURVE('',#460,(#464,#471),.PCURVE_S1.);+#460 = LINE('',#461,#462);+#461 = CARTESIAN_POINT('',(-1.5,-1.458,0.5975));+#462 = VECTOR('',#463,1.);+#463 = DIRECTION('',(1.,0.,0.));+#464 = PCURVE('',#207,#465);+#465 = DEFINITIONAL_REPRESENTATION('',(#466),#470);+#466 = LINE('',#467,#468);+#467 = CARTESIAN_POINT('',(0.,2.969848480984E-02));+#468 = VECTOR('',#469,1.);+#469 = DIRECTION('',(-1.,0.));+#470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#471 = PCURVE('',#288,#472);+#472 = DEFINITIONAL_REPRESENTATION('',(#473),#477);+#473 = LINE('',#474,#475);+#474 = CARTESIAN_POINT('',(0.,4.2E-02));+#475 = VECTOR('',#476,1.);+#476 = DIRECTION('',(1.,0.));+#477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#478 = ADVANCED_FACE('',(#479,#527),#288,.T.);+#479 = FACE_BOUND('',#480,.T.);+#480 = EDGE_LOOP('',(#481,#482,#483,#506));+#481 = ORIENTED_EDGE('',*,*,#274,.F.);+#482 = ORIENTED_EDGE('',*,*,#458,.T.);+#483 = ORIENTED_EDGE('',*,*,#484,.T.);+#484 = EDGE_CURVE('',#436,#485,#487,.T.);+#485 = VERTEX_POINT('',#486);+#486 = CARTESIAN_POINT('',(1.458,1.458,0.5975));+#487 = SURFACE_CURVE('',#488,(#492,#499),.PCURVE_S1.);+#488 = LINE('',#489,#490);+#489 = CARTESIAN_POINT('',(1.458,-1.5,0.5975));+#490 = VECTOR('',#491,1.);+#491 = DIRECTION('',(0.,1.,0.));+#492 = PCURVE('',#288,#493);+#493 = DEFINITIONAL_REPRESENTATION('',(#494),#498);+#494 = LINE('',#495,#496);+#495 = CARTESIAN_POINT('',(2.958,0.));+#496 = VECTOR('',#497,1.);+#497 = DIRECTION('',(0.,1.));+#498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#499 = PCURVE('',#418,#500);+#500 = DEFINITIONAL_REPRESENTATION('',(#501),#505);+#501 = LINE('',#502,#503);+#502 = CARTESIAN_POINT('',(0.,2.969848480984E-02));+#503 = VECTOR('',#504,1.);+#504 = DIRECTION('',(1.,0.));+#505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#506 = ORIENTED_EDGE('',*,*,#507,.F.);+#507 = EDGE_CURVE('',#247,#485,#508,.T.);+#508 = SURFACE_CURVE('',#509,(#513,#520),.PCURVE_S1.);+#509 = LINE('',#510,#511);+#510 = CARTESIAN_POINT('',(-1.5,1.458,0.5975));+#511 = VECTOR('',#512,1.);+#512 = DIRECTION('',(1.,0.,0.));+#513 = PCURVE('',#288,#514);+#514 = DEFINITIONAL_REPRESENTATION('',(#515),#519);+#515 = LINE('',#516,#517);+#516 = CARTESIAN_POINT('',(0.,2.958));+#517 = VECTOR('',#518,1.);+#518 = DIRECTION('',(1.,0.));+#519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#520 = PCURVE('',#262,#521);+#521 = DEFINITIONAL_REPRESENTATION('',(#522),#526);+#522 = LINE('',#523,#524);+#523 = CARTESIAN_POINT('',(0.,2.969848480984E-02));+#524 = VECTOR('',#525,1.);+#525 = DIRECTION('',(-1.,0.));+#526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#527 = FACE_BOUND('',#528,.T.);+#528 = EDGE_LOOP('',(#529));+#529 = ORIENTED_EDGE('',*,*,#530,.T.);+#530 = EDGE_CURVE('',#531,#531,#533,.T.);+#531 = VERTEX_POINT('',#532);+#532 = CARTESIAN_POINT('',(-0.9,1.11,0.5975));+#533 = SURFACE_CURVE('',#534,(#539,#550),.PCURVE_S1.);+#534 = CIRCLE('',#535,0.21);+#535 = AXIS2_PLACEMENT_3D('',#536,#537,#538);+#536 = CARTESIAN_POINT('',(-1.11,1.11,0.5975));+#537 = DIRECTION('',(0.,0.,-1.));+#538 = DIRECTION('',(1.,0.,0.));+#539 = PCURVE('',#288,#540);+#540 = DEFINITIONAL_REPRESENTATION('',(#541),#549);+#541 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#542,#543,#544,#545,#546,#547+,#548),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+ -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#542 = CARTESIAN_POINT('',(0.6,2.61));+#543 = CARTESIAN_POINT('',(0.6,2.246269330411));+#544 = CARTESIAN_POINT('',(0.285,2.428134665205));+#545 = CARTESIAN_POINT('',(-3.E-02,2.61));+#546 = CARTESIAN_POINT('',(0.285,2.791865334795));+#547 = CARTESIAN_POINT('',(0.6,2.973730669589));+#548 = CARTESIAN_POINT('',(0.6,2.61));+#549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#550 = PCURVE('',#551,#556);+#551 = CYLINDRICAL_SURFACE('',#552,0.21);+#552 = AXIS2_PLACEMENT_3D('',#553,#554,#555);+#553 = CARTESIAN_POINT('',(-1.11,1.11,0.5625));+#554 = DIRECTION('',(-0.,-0.,-1.));+#555 = DIRECTION('',(1.,0.,0.));+#556 = DEFINITIONAL_REPRESENTATION('',(#557),#561);+#557 = LINE('',#558,#559);+#558 = CARTESIAN_POINT('',(-4.138911435803E-13,-3.5E-02));+#559 = VECTOR('',#560,1.);+#560 = DIRECTION('',(1.,-0.));+#561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#562 = ADVANCED_FACE('',(#563),#262,.T.);+#563 = FACE_BOUND('',#564,.F.);+#564 = EDGE_LOOP('',(#565,#566,#567,#588));+#565 = ORIENTED_EDGE('',*,*,#246,.F.);+#566 = ORIENTED_EDGE('',*,*,#377,.T.);+#567 = ORIENTED_EDGE('',*,*,#568,.T.);+#568 = EDGE_CURVE('',#353,#485,#569,.T.);+#569 = SURFACE_CURVE('',#570,(#574,#581),.PCURVE_S1.);+#570 = LINE('',#571,#572);+#571 = CARTESIAN_POINT('',(0.486,0.486,1.5695));+#572 = VECTOR('',#573,1.);+#573 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919));+#574 = PCURVE('',#262,#575);+#575 = DEFINITIONAL_REPRESENTATION('',(#576),#580);+#576 = LINE('',#577,#578);+#577 = CARTESIAN_POINT('',(-1.986,1.404314067436));+#578 = VECTOR('',#579,1.);+#579 = DIRECTION('',(0.57735026919,0.816496580928));+#580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#581 = PCURVE('',#418,#582);+#582 = DEFINITIONAL_REPRESENTATION('',(#583),#587);+#583 = LINE('',#584,#585);+#584 = CARTESIAN_POINT('',(1.986,1.404314067436));+#585 = VECTOR('',#586,1.);+#586 = DIRECTION('',(-0.57735026919,0.816496580928));+#587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#588 = ORIENTED_EDGE('',*,*,#507,.F.);+#589 = ADVANCED_FACE('',(#590),#418,.T.);+#590 = FACE_BOUND('',#591,.T.);+#591 = EDGE_LOOP('',(#592,#593,#594,#595));+#592 = ORIENTED_EDGE('',*,*,#435,.F.);+#593 = ORIENTED_EDGE('',*,*,#404,.T.);+#594 = ORIENTED_EDGE('',*,*,#568,.T.);+#595 = ORIENTED_EDGE('',*,*,#484,.F.);+#596 = ADVANCED_FACE('',(#597),#551,.F.);+#597 = FACE_BOUND('',#598,.F.);+#598 = EDGE_LOOP('',(#599,#622,#623,#624));+#599 = ORIENTED_EDGE('',*,*,#600,.T.);+#600 = EDGE_CURVE('',#601,#531,#603,.T.);+#601 = VERTEX_POINT('',#602);+#602 = CARTESIAN_POINT('',(-0.9,1.11,0.5625));+#603 = SEAM_CURVE('',#604,(#608,#615),.PCURVE_S1.);+#604 = LINE('',#605,#606);+#605 = CARTESIAN_POINT('',(-0.9,1.11,0.5625));+#606 = VECTOR('',#607,1.);+#607 = DIRECTION('',(0.,0.,1.));+#608 = PCURVE('',#551,#609);+#609 = DEFINITIONAL_REPRESENTATION('',(#610),#614);+#610 = LINE('',#611,#612);+#611 = CARTESIAN_POINT('',(-4.138911435803E-13,0.));+#612 = VECTOR('',#613,1.);+#613 = DIRECTION('',(-0.,-1.));+#614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#615 = PCURVE('',#551,#616);+#616 = DEFINITIONAL_REPRESENTATION('',(#617),#621);+#617 = LINE('',#618,#619);+#618 = CARTESIAN_POINT('',(6.28318530718,0.));+#619 = VECTOR('',#620,1.);+#620 = DIRECTION('',(-0.,-1.));+#621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#622 = ORIENTED_EDGE('',*,*,#530,.T.);+#623 = ORIENTED_EDGE('',*,*,#600,.F.);+#624 = ORIENTED_EDGE('',*,*,#625,.T.);+#625 = EDGE_CURVE('',#601,#601,#626,.T.);+#626 = SURFACE_CURVE('',#627,(#632,#639),.PCURVE_S1.);+#627 = CIRCLE('',#628,0.21);+#628 = AXIS2_PLACEMENT_3D('',#629,#630,#631);+#629 = CARTESIAN_POINT('',(-1.11,1.11,0.5625));+#630 = DIRECTION('',(0.,0.,1.));+#631 = DIRECTION('',(1.,0.,0.));+#632 = PCURVE('',#551,#633);+#633 = DEFINITIONAL_REPRESENTATION('',(#634),#638);+#634 = LINE('',#635,#636);+#635 = CARTESIAN_POINT('',(6.28318530718,0.));+#636 = VECTOR('',#637,1.);+#637 = DIRECTION('',(-1.,0.));+#638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#639 = PCURVE('',#640,#645);+#640 = PLANE('',#641);+#641 = AXIS2_PLACEMENT_3D('',#642,#643,#644);+#642 = CARTESIAN_POINT('',(-1.11,1.11,0.5625));+#643 = DIRECTION('',(0.,0.,1.));+#644 = DIRECTION('',(1.,0.,0.));+#645 = DEFINITIONAL_REPRESENTATION('',(#646),#650);+#646 = CIRCLE('',#647,0.21);+#647 = AXIS2_PLACEMENT_2D('',#648,#649);+#648 = CARTESIAN_POINT('',(0.,0.));+#649 = DIRECTION('',(1.,0.));+#650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#651 = ADVANCED_FACE('',(#652),#640,.T.);+#652 = FACE_BOUND('',#653,.T.);+#653 = EDGE_LOOP('',(#654));+#654 = ORIENTED_EDGE('',*,*,#625,.T.);+#655 = MANIFOLD_SOLID_BREP('',#656);+#656 = CLOSED_SHELL('',(#657));+#657 = ADVANCED_FACE('',(#658),#662,.T.);+#658 = FACE_BOUND('',#659,.T.);+#659 = VERTEX_LOOP('',#660);+#660 = VERTEX_POINT('',#661);+#661 = CARTESIAN_POINT('',(-1.45,0.975,-4.125E-02));+#662 = SPHERICAL_SURFACE('',#663,0.165);+#663 = AXIS2_PLACEMENT_3D('',#664,#665,#666);+#664 = CARTESIAN_POINT('',(-1.45,0.975,0.12375));+#665 = DIRECTION('',(0.,0.,1.));+#666 = DIRECTION('',(1.,0.,0.));+#667 = MANIFOLD_SOLID_BREP('',#668);+#668 = CLOSED_SHELL('',(#669));+#669 = ADVANCED_FACE('',(#670),#674,.T.);+#670 = FACE_BOUND('',#671,.T.);+#671 = VERTEX_LOOP('',#672);+#672 = VERTEX_POINT('',#673);+#673 = CARTESIAN_POINT('',(-1.45,0.325,-4.125E-02));+#674 = SPHERICAL_SURFACE('',#675,0.165);+#675 = AXIS2_PLACEMENT_3D('',#676,#677,#678);+#676 = CARTESIAN_POINT('',(-1.45,0.325,0.12375));+#677 = DIRECTION('',(0.,0.,1.));+#678 = DIRECTION('',(1.,0.,0.));+#679 = MANIFOLD_SOLID_BREP('',#680);+#680 = CLOSED_SHELL('',(#681));+#681 = ADVANCED_FACE('',(#682),#686,.T.);+#682 = FACE_BOUND('',#683,.T.);+#683 = VERTEX_LOOP('',#684);+#684 = VERTEX_POINT('',#685);+#685 = CARTESIAN_POINT('',(-1.45,-0.325,-4.125E-02));+#686 = SPHERICAL_SURFACE('',#687,0.165);+#687 = AXIS2_PLACEMENT_3D('',#688,#689,#690);+#688 = CARTESIAN_POINT('',(-1.45,-0.325,0.12375));+#689 = DIRECTION('',(0.,0.,1.));+#690 = DIRECTION('',(1.,0.,0.));+#691 = MANIFOLD_SOLID_BREP('',#692);+#692 = CLOSED_SHELL('',(#693));+#693 = ADVANCED_FACE('',(#694),#698,.T.);+#694 = FACE_BOUND('',#695,.T.);+#695 = VERTEX_LOOP('',#696);+#696 = VERTEX_POINT('',#697);+#697 = CARTESIAN_POINT('',(-1.45,-0.975,-4.125E-02));+#698 = SPHERICAL_SURFACE('',#699,0.165);+#699 = AXIS2_PLACEMENT_3D('',#700,#701,#702);+#700 = CARTESIAN_POINT('',(-1.45,-0.975,0.12375));+#701 = DIRECTION('',(0.,0.,1.));+#702 = DIRECTION('',(1.,0.,0.));+#703 = MANIFOLD_SOLID_BREP('',#704);+#704 = CLOSED_SHELL('',(#705));+#705 = ADVANCED_FACE('',(#706),#710,.T.);+#706 = FACE_BOUND('',#707,.T.);+#707 = VERTEX_LOOP('',#708);+#708 = VERTEX_POINT('',#709);+#709 = CARTESIAN_POINT('',(1.45,-0.975,-4.125E-02));+#710 = SPHERICAL_SURFACE('',#711,0.165);+#711 = AXIS2_PLACEMENT_3D('',#712,#713,#714);+#712 = CARTESIAN_POINT('',(1.45,-0.975,0.12375));+#713 = DIRECTION('',(0.,0.,1.));+#714 = DIRECTION('',(1.,0.,0.));+#715 = MANIFOLD_SOLID_BREP('',#716);+#716 = CLOSED_SHELL('',(#717));+#717 = ADVANCED_FACE('',(#718),#722,.T.);+#718 = FACE_BOUND('',#719,.T.);+#719 = VERTEX_LOOP('',#720);+#720 = VERTEX_POINT('',#721);+#721 = CARTESIAN_POINT('',(1.45,-0.325,-4.125E-02));+#722 = SPHERICAL_SURFACE('',#723,0.165);+#723 = AXIS2_PLACEMENT_3D('',#724,#725,#726);+#724 = CARTESIAN_POINT('',(1.45,-0.325,0.12375));+#725 = DIRECTION('',(0.,0.,1.));+#726 = DIRECTION('',(1.,0.,0.));+#727 = MANIFOLD_SOLID_BREP('',#728);+#728 = CLOSED_SHELL('',(#729));+#729 = ADVANCED_FACE('',(#730),#734,.T.);+#730 = FACE_BOUND('',#731,.T.);+#731 = VERTEX_LOOP('',#732);+#732 = VERTEX_POINT('',#733);+#733 = CARTESIAN_POINT('',(1.45,0.325,-4.125E-02));+#734 = SPHERICAL_SURFACE('',#735,0.165);+#735 = AXIS2_PLACEMENT_3D('',#736,#737,#738);+#736 = CARTESIAN_POINT('',(1.45,0.325,0.12375));+#737 = DIRECTION('',(0.,0.,1.));+#738 = DIRECTION('',(1.,0.,0.));+#739 = MANIFOLD_SOLID_BREP('',#740);+#740 = CLOSED_SHELL('',(#741));+#741 = ADVANCED_FACE('',(#742),#746,.T.);+#742 = FACE_BOUND('',#743,.T.);+#743 = VERTEX_LOOP('',#744);+#744 = VERTEX_POINT('',#745);+#745 = CARTESIAN_POINT('',(1.45,0.975,-4.125E-02));+#746 = SPHERICAL_SURFACE('',#747,0.165);+#747 = AXIS2_PLACEMENT_3D('',#748,#749,#750);+#748 = CARTESIAN_POINT('',(1.45,0.975,0.12375));+#749 = DIRECTION('',(0.,0.,1.));+#750 = DIRECTION('',(1.,0.,0.));+#751 = MANIFOLD_SOLID_BREP('',#752);+#752 = CLOSED_SHELL('',(#753,#841,#845));+#753 = ADVANCED_FACE('',(#754),#767,.T.);+#754 = FACE_BOUND('',#755,.T.);+#755 = EDGE_LOOP('',(#756,#790,#813,#840));+#756 = ORIENTED_EDGE('',*,*,#757,.T.);+#757 = EDGE_CURVE('',#758,#758,#760,.T.);+#758 = VERTEX_POINT('',#759);+#759 = CARTESIAN_POINT('',(-0.9,1.11,0.5625));+#760 = SURFACE_CURVE('',#761,(#766,#778),.PCURVE_S1.);+#761 = CIRCLE('',#762,0.21);+#762 = AXIS2_PLACEMENT_3D('',#763,#764,#765);+#763 = CARTESIAN_POINT('',(-1.11,1.11,0.5625));+#764 = DIRECTION('',(0.,0.,1.));+#765 = DIRECTION('',(1.,0.,0.));+#766 = PCURVE('',#767,#772);+#767 = CYLINDRICAL_SURFACE('',#768,0.21);+#768 = AXIS2_PLACEMENT_3D('',#769,#770,#771);+#769 = CARTESIAN_POINT('',(-1.11,1.11,0.5625));+#770 = DIRECTION('',(-0.,-0.,-1.));+#771 = DIRECTION('',(1.,0.,0.));+#772 = DEFINITIONAL_REPRESENTATION('',(#773),#777);+#773 = LINE('',#774,#775);+#774 = CARTESIAN_POINT('',(6.28318530718,0.));+#775 = VECTOR('',#776,1.);+#776 = DIRECTION('',(-1.,0.));+#777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#778 = PCURVE('',#779,#784);+#779 = PLANE('',#780);+#780 = AXIS2_PLACEMENT_3D('',#781,#782,#783);+#781 = CARTESIAN_POINT('',(-1.11,1.11,0.5625));+#782 = DIRECTION('',(0.,0.,1.));+#783 = DIRECTION('',(1.,0.,0.));+#784 = DEFINITIONAL_REPRESENTATION('',(#785),#789);+#785 = CIRCLE('',#786,0.21);+#786 = AXIS2_PLACEMENT_2D('',#787,#788);+#787 = CARTESIAN_POINT('',(0.,0.));+#788 = DIRECTION('',(1.,0.));+#789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#790 = ORIENTED_EDGE('',*,*,#791,.T.);+#791 = EDGE_CURVE('',#758,#792,#794,.T.);+#792 = VERTEX_POINT('',#793);+#793 = CARTESIAN_POINT('',(-0.9,1.11,0.5675));+#794 = SEAM_CURVE('',#795,(#799,#806),.PCURVE_S1.);+#795 = LINE('',#796,#797);+#796 = CARTESIAN_POINT('',(-0.9,1.11,0.5625));+#797 = VECTOR('',#798,1.);+#798 = DIRECTION('',(0.,0.,1.));+#799 = PCURVE('',#767,#800);+#800 = DEFINITIONAL_REPRESENTATION('',(#801),#805);+#801 = LINE('',#802,#803);+#802 = CARTESIAN_POINT('',(-4.138911435803E-13,0.));+#803 = VECTOR('',#804,1.);+#804 = DIRECTION('',(-0.,-1.));+#805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#806 = PCURVE('',#767,#807);+#807 = DEFINITIONAL_REPRESENTATION('',(#808),#812);+#808 = LINE('',#809,#810);+#809 = CARTESIAN_POINT('',(6.28318530718,0.));+#810 = VECTOR('',#811,1.);+#811 = DIRECTION('',(-0.,-1.));+#812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#813 = ORIENTED_EDGE('',*,*,#814,.F.);+#814 = EDGE_CURVE('',#792,#792,#815,.T.);+#815 = SURFACE_CURVE('',#816,(#821,#828),.PCURVE_S1.);+#816 = CIRCLE('',#817,0.21);+#817 = AXIS2_PLACEMENT_3D('',#818,#819,#820);+#818 = CARTESIAN_POINT('',(-1.11,1.11,0.5675));+#819 = DIRECTION('',(0.,0.,1.));+#820 = DIRECTION('',(1.,0.,0.));+#821 = PCURVE('',#767,#822);+#822 = DEFINITIONAL_REPRESENTATION('',(#823),#827);+#823 = LINE('',#824,#825);+#824 = CARTESIAN_POINT('',(6.28318530718,-5.E-03));+#825 = VECTOR('',#826,1.);+#826 = DIRECTION('',(-1.,0.));+#827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#828 = PCURVE('',#829,#834);+#829 = PLANE('',#830);+#830 = AXIS2_PLACEMENT_3D('',#831,#832,#833);+#831 = CARTESIAN_POINT('',(-1.11,1.11,0.5675));+#832 = DIRECTION('',(0.,0.,1.));+#833 = DIRECTION('',(1.,0.,0.));+#834 = DEFINITIONAL_REPRESENTATION('',(#835),#839);+#835 = CIRCLE('',#836,0.21);+#836 = AXIS2_PLACEMENT_2D('',#837,#838);+#837 = CARTESIAN_POINT('',(0.,0.));+#838 = DIRECTION('',(1.,0.));+#839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#840 = ORIENTED_EDGE('',*,*,#791,.F.);+#841 = ADVANCED_FACE('',(#842),#779,.F.);+#842 = FACE_BOUND('',#843,.F.);+#843 = EDGE_LOOP('',(#844));+#844 = ORIENTED_EDGE('',*,*,#757,.T.);+#845 = ADVANCED_FACE('',(#846),#829,.T.);+#846 = FACE_BOUND('',#847,.T.);+#847 = EDGE_LOOP('',(#848));+#848 = ORIENTED_EDGE('',*,*,#814,.T.);+#849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#853)) GLOBAL_UNIT_ASSIGNED_CONTEXT+((#850,#851,#852)) REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#850 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#851 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#852 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#853 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#850,+ 'distance_accuracy_value','confusion accuracy');+#854 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#855 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#856,+ #864,#871,#878,#885,#892,#899,#906,#913,#920,#927,#934,#941,#949,+ #956,#963,#970,#977,#984,#991,#998,#1006,#1013),#849);+#856 = STYLED_ITEM('color',(#857),#17);+#857 = PRESENTATION_STYLE_ASSIGNMENT((#858));+#858 = SURFACE_STYLE_USAGE(.BOTH.,#859);+#859 = SURFACE_SIDE_STYLE('',(#860));+#860 = SURFACE_STYLE_FILL_AREA(#861);+#861 = FILL_AREA_STYLE('',(#862));+#862 = FILL_AREA_STYLE_COLOUR('',#863);+#863 = COLOUR_RGB('',0.120000001395,0.120000001395,0.130000001093);+#864 = STYLED_ITEM('color',(#865),#137);+#865 = PRESENTATION_STYLE_ASSIGNMENT((#866));+#866 = SURFACE_STYLE_USAGE(.BOTH.,#867);+#867 = SURFACE_SIDE_STYLE('',(#868));+#868 = SURFACE_STYLE_FILL_AREA(#869);+#869 = FILL_AREA_STYLE('',(#870));+#870 = FILL_AREA_STYLE_COLOUR('',#863);+#871 = STYLED_ITEM('color',(#872),#218);+#872 = PRESENTATION_STYLE_ASSIGNMENT((#873));+#873 = SURFACE_STYLE_USAGE(.BOTH.,#874);+#874 = SURFACE_SIDE_STYLE('',(#875));+#875 = SURFACE_STYLE_FILL_AREA(#876);+#876 = FILL_AREA_STYLE('',(#877));+#877 = FILL_AREA_STYLE_COLOUR('',#863);+#878 = STYLED_ITEM('color',(#879),#299);+#879 = PRESENTATION_STYLE_ASSIGNMENT((#880));+#880 = SURFACE_STYLE_USAGE(.BOTH.,#881);+#881 = SURFACE_SIDE_STYLE('',(#882));+#882 = SURFACE_STYLE_FILL_AREA(#883);+#883 = FILL_AREA_STYLE('',(#884));+#884 = FILL_AREA_STYLE_COLOUR('',#863);+#885 = STYLED_ITEM('color',(#886),#348);+#886 = PRESENTATION_STYLE_ASSIGNMENT((#887));+#887 = SURFACE_STYLE_USAGE(.BOTH.,#888);+#888 = SURFACE_SIDE_STYLE('',(#889));+#889 = SURFACE_STYLE_FILL_AREA(#890);+#890 = FILL_AREA_STYLE('',(#891));+#891 = FILL_AREA_STYLE_COLOUR('',#863);+#892 = STYLED_ITEM('color',(#893),#397);+#893 = PRESENTATION_STYLE_ASSIGNMENT((#894));+#894 = SURFACE_STYLE_USAGE(.BOTH.,#895);+#895 = SURFACE_SIDE_STYLE('',(#896));+#896 = SURFACE_STYLE_FILL_AREA(#897);+#897 = FILL_AREA_STYLE('',(#898));+#898 = FILL_AREA_STYLE_COLOUR('',#863);+#899 = STYLED_ITEM('color',(#900),#429);+#900 = PRESENTATION_STYLE_ASSIGNMENT((#901));+#901 = SURFACE_STYLE_USAGE(.BOTH.,#902);+#902 = SURFACE_SIDE_STYLE('',(#903));+#903 = SURFACE_STYLE_FILL_AREA(#904);+#904 = FILL_AREA_STYLE('',(#905));+#905 = FILL_AREA_STYLE_COLOUR('',#863);+#906 = STYLED_ITEM('color',(#907),#478);+#907 = PRESENTATION_STYLE_ASSIGNMENT((#908));+#908 = SURFACE_STYLE_USAGE(.BOTH.,#909);+#909 = SURFACE_SIDE_STYLE('',(#910));+#910 = SURFACE_STYLE_FILL_AREA(#911);+#911 = FILL_AREA_STYLE('',(#912));+#912 = FILL_AREA_STYLE_COLOUR('',#863);+#913 = STYLED_ITEM('color',(#914),#562);+#914 = PRESENTATION_STYLE_ASSIGNMENT((#915));+#915 = SURFACE_STYLE_USAGE(.BOTH.,#916);+#916 = SURFACE_SIDE_STYLE('',(#917));+#917 = SURFACE_STYLE_FILL_AREA(#918);+#918 = FILL_AREA_STYLE('',(#919));+#919 = FILL_AREA_STYLE_COLOUR('',#863);+#920 = STYLED_ITEM('color',(#921),#589);+#921 = PRESENTATION_STYLE_ASSIGNMENT((#922));+#922 = SURFACE_STYLE_USAGE(.BOTH.,#923);+#923 = SURFACE_SIDE_STYLE('',(#924));+#924 = SURFACE_STYLE_FILL_AREA(#925);+#925 = FILL_AREA_STYLE('',(#926));+#926 = FILL_AREA_STYLE_COLOUR('',#863);+#927 = STYLED_ITEM('color',(#928),#596);+#928 = PRESENTATION_STYLE_ASSIGNMENT((#929));+#929 = SURFACE_STYLE_USAGE(.BOTH.,#930);+#930 = SURFACE_SIDE_STYLE('',(#931));+#931 = SURFACE_STYLE_FILL_AREA(#932);+#932 = FILL_AREA_STYLE('',(#933));+#933 = FILL_AREA_STYLE_COLOUR('',#863);+#934 = STYLED_ITEM('color',(#935),#651);+#935 = PRESENTATION_STYLE_ASSIGNMENT((#936));+#936 = SURFACE_STYLE_USAGE(.BOTH.,#937);+#937 = SURFACE_SIDE_STYLE('',(#938));+#938 = SURFACE_STYLE_FILL_AREA(#939);+#939 = FILL_AREA_STYLE('',(#940));+#940 = FILL_AREA_STYLE_COLOUR('',#863);+#941 = STYLED_ITEM('color',(#942),#657);+#942 = PRESENTATION_STYLE_ASSIGNMENT((#943));+#943 = SURFACE_STYLE_USAGE(.BOTH.,#944);+#944 = SURFACE_SIDE_STYLE('',(#945));+#945 = SURFACE_STYLE_FILL_AREA(#946);+#946 = FILL_AREA_STYLE('',(#947));+#947 = FILL_AREA_STYLE_COLOUR('',#948);+#948 = COLOUR_RGB('',0.78000000177,0.78000000177,0.760000013601);+#949 = STYLED_ITEM('color',(#950),#669);+#950 = PRESENTATION_STYLE_ASSIGNMENT((#951));+#951 = SURFACE_STYLE_USAGE(.BOTH.,#952);+#952 = SURFACE_SIDE_STYLE('',(#953));+#953 = SURFACE_STYLE_FILL_AREA(#954);+#954 = FILL_AREA_STYLE('',(#955));+#955 = FILL_AREA_STYLE_COLOUR('',#948);+#956 = STYLED_ITEM('color',(#957),#681);+#957 = PRESENTATION_STYLE_ASSIGNMENT((#958));+#958 = SURFACE_STYLE_USAGE(.BOTH.,#959);+#959 = SURFACE_SIDE_STYLE('',(#960));+#960 = SURFACE_STYLE_FILL_AREA(#961);+#961 = FILL_AREA_STYLE('',(#962));+#962 = FILL_AREA_STYLE_COLOUR('',#948);+#963 = STYLED_ITEM('color',(#964),#693);+#964 = PRESENTATION_STYLE_ASSIGNMENT((#965));+#965 = SURFACE_STYLE_USAGE(.BOTH.,#966);+#966 = SURFACE_SIDE_STYLE('',(#967));+#967 = SURFACE_STYLE_FILL_AREA(#968);+#968 = FILL_AREA_STYLE('',(#969));+#969 = FILL_AREA_STYLE_COLOUR('',#948);+#970 = STYLED_ITEM('color',(#971),#705);+#971 = PRESENTATION_STYLE_ASSIGNMENT((#972));+#972 = SURFACE_STYLE_USAGE(.BOTH.,#973);+#973 = SURFACE_SIDE_STYLE('',(#974));+#974 = SURFACE_STYLE_FILL_AREA(#975);+#975 = FILL_AREA_STYLE('',(#976));+#976 = FILL_AREA_STYLE_COLOUR('',#948);+#977 = STYLED_ITEM('color',(#978),#717);+#978 = PRESENTATION_STYLE_ASSIGNMENT((#979));+#979 = SURFACE_STYLE_USAGE(.BOTH.,#980);+#980 = SURFACE_SIDE_STYLE('',(#981));+#981 = SURFACE_STYLE_FILL_AREA(#982);+#982 = FILL_AREA_STYLE('',(#983));+#983 = FILL_AREA_STYLE_COLOUR('',#948);+#984 = STYLED_ITEM('color',(#985),#729);+#985 = PRESENTATION_STYLE_ASSIGNMENT((#986));+#986 = SURFACE_STYLE_USAGE(.BOTH.,#987);+#987 = SURFACE_SIDE_STYLE('',(#988));+#988 = SURFACE_STYLE_FILL_AREA(#989);+#989 = FILL_AREA_STYLE('',(#990));+#990 = FILL_AREA_STYLE_COLOUR('',#948);+#991 = STYLED_ITEM('color',(#992),#741);+#992 = PRESENTATION_STYLE_ASSIGNMENT((#993));+#993 = SURFACE_STYLE_USAGE(.BOTH.,#994);+#994 = SURFACE_SIDE_STYLE('',(#995));+#995 = SURFACE_STYLE_FILL_AREA(#996);+#996 = FILL_AREA_STYLE('',(#997));+#997 = FILL_AREA_STYLE_COLOUR('',#948);+#998 = STYLED_ITEM('color',(#999),#753);+#999 = PRESENTATION_STYLE_ASSIGNMENT((#1000));+#1000 = SURFACE_STYLE_USAGE(.BOTH.,#1001);+#1001 = SURFACE_SIDE_STYLE('',(#1002));+#1002 = SURFACE_STYLE_FILL_AREA(#1003);+#1003 = FILL_AREA_STYLE('',(#1004));+#1004 = FILL_AREA_STYLE_COLOUR('',#1005);+#1005 = COLOUR_RGB('',0.380000002513,0.380000002513,0.399999997426);+#1006 = STYLED_ITEM('color',(#1007),#841);+#1007 = PRESENTATION_STYLE_ASSIGNMENT((#1008));+#1008 = SURFACE_STYLE_USAGE(.BOTH.,#1009);+#1009 = SURFACE_SIDE_STYLE('',(#1010));+#1010 = SURFACE_STYLE_FILL_AREA(#1011);+#1011 = FILL_AREA_STYLE('',(#1012));+#1012 = FILL_AREA_STYLE_COLOUR('',#1005);+#1013 = STYLED_ITEM('color',(#1014),#845);+#1014 = PRESENTATION_STYLE_ASSIGNMENT((#1015));+#1015 = SURFACE_STYLE_USAGE(.BOTH.,#1016);+#1016 = SURFACE_SIDE_STYLE('',(#1017));+#1017 = SURFACE_STYLE_FILL_AREA(#1018);+#1018 = FILL_AREA_STYLE('',(#1019));+#1019 = FILL_AREA_STYLE_COLOUR('',#1005);+ENDSEC;+END-ISO-10303-21;
docs/ada4432-1wbcpz-r7-datasheet.pdfadded⋯ 1 unchanged line ⋯
docs/hero.pngadded⋯ 1 unchanged line ⋯
package.jsonadded+200@@ -0,0 +1,200 @@+{+ "slug": "ada4432-1wbcpz-r7",+ "version": "0.1.0",+ "type": "component",+ "description": "Analog Devices Video Amplifiers, LFCSP-WD-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "operational amplifier-comparator",+ "ada4432-1wbcpz-r7",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ada4432-1wbcpz-r7.kicad_sym",+ "ada4432-1wbcpz-r7.kicad_mod",+ "ada4432-1wbcpz-r7.glb",+ "ada4432-1wbcpz-r7.step",+ "ada4432-1wbcpz-r7.lbr",+ "docs/hero.png",+ "docs/ada4432-1wbcpz-r7-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ada4432-1wbcpz-r7-hero.glb",+ "ada4432-1wbcpz-r7-hero.overlay.json",+ "ada4432-1wbcpz-r7-etched.glb"+ ],+ "component": {+ "mpn": "ADA4432-1WBCPZ-R7",+ "manufacturer": "Analog Devices",+ "package": "LFCSP-WD-8",+ "pin_count": 9,+ "category": "Operational Amplifier/Comparator",+ "subcategory": "Video Amplifiers",+ "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADA4432-1_4433-1.pdf",+ "parts": {+ "symbol": "ada4432-1wbcpz-r7.kicad_sym",+ "footprint": "ada4432-1wbcpz-r7.kicad_mod",+ "model_3d": "ada4432-1wbcpz-r7-hero.glb",+ "model_3d_plain": "ada4432-1wbcpz-r7-etched.glb",+ "model_3d_step": "ada4432-1wbcpz-r7-etched.step",+ "model_3d_step_plain": "ada4432-1wbcpz-r7.step",+ "lbr": "ada4432-1wbcpz-r7.lbr"+ },+ "distributor_links": {+ "lcsc": "C654102",+ "digikey": "505-ADA4432-1WBCPZ-R7TR-ND",+ "mouser": "584-ADA4432-1WBCPZR7"+ },+ "distributor_check": {+ "checked_at": "2026-10-30T20:54:35Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "505-ADA4432-1WBCPZ-R7TR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "584-ADA4432-1WBCPZR7",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; do not connect to this pin."+ },+ {+ "number": "2",+ "name": "STB",+ "type": "output",+ "description": "Short-to-battery indicator output; logic high indicates a short-to-battery condition and logic low indicates normal operation."+ },+ {+ "number": "3",+ "name": "+VS",+ "type": "power_in",+ "description": "Positive power supply (2.6 V to 3.6 V operating range); bypass with a 0.1 µF capacitor to GND."+ },+ {+ "number": "4",+ "name": "OUT",+ "type": "output",+ "description": "Amplifier output, protected against short-to-battery overvoltage up to 18 V and short to ground."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; do not connect to this pin."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Power supply ground pin."+ },+ {+ "number": "7",+ "name": "ENA",+ "type": "input",+ "description": "Enable function; connect to +VS or float for normal operation, connect to GND to disable the device (internally pulled up to +VS through 250 kΩ)."+ },+ {+ "number": "8",+ "name": "IN",+ "type": "input",+ "description": "Amplifier input; input voltage range is typically 0 to 1.4 V."+ },+ {+ "number": "9",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: EPAD is not numbered in the datasheet; the datasheet says it 'can be connected to the ground plane' ; Datasheet only says the input range is limited by the output voltage range; the 0 to 1.4 V figure in"+ ],+ "pages_sent": 15,+ "cost_usd": 0.1312,+ "at": "2026-10-30T20:54:23"+ },+ "datasheet": {+ "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADA4432-1_4433-1.pdf",+ "pages": 24,+ "sha256": "1af22196e01fde44",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ada4432-1wbcpz-r7.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.23,+ 3.0,+ 0.639+ ],+ "zmin_mm": -0.041,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "09ee199ea4ed05f0573c050488b79ded52131b92c3d81e036d9d27b5d0167adc",+ "checked": "2026-10-30",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ada4432-1wbcpz-r7-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.23,+ 3.0,+ 0.639+ ],+ "zmin_mm": -0.041,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "352e628b91bb0beeff0f54501515c99ca62e8c061066b6aaf353be0822fcbcd0",+ "checked": "2026-10-30",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+206@@ -0,0 +1,206 @@+{+ "slug": "ada4432-1wbcpz-r7",+ "version": "0.1.0",+ "type": "component",+ "description": "Analog Devices Video Amplifiers, LFCSP-WD-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "operational amplifier-comparator",+ "ada4432-1wbcpz-r7",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ada4432-1wbcpz-r7.kicad_sym",+ "ada4432-1wbcpz-r7.kicad_mod",+ "ada4432-1wbcpz-r7.glb",+ "ada4432-1wbcpz-r7.step",+ "ada4432-1wbcpz-r7.lbr",+ "docs/hero.png",+ "docs/ada4432-1wbcpz-r7-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ada4432-1wbcpz-r7-hero.glb",+ "ada4432-1wbcpz-r7-hero.overlay.json",+ "ada4432-1wbcpz-r7-etched.glb"+ ],+ "component": {+ "mpn": "ADA4432-1WBCPZ-R7",+ "manufacturer": "Analog Devices",+ "package": "LFCSP-WD-8",+ "pin_count": 9,+ "category": "Operational Amplifier/Comparator",+ "subcategory": "Video Amplifiers",+ "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADA4432-1_4433-1.pdf",+ "parts": {+ "symbol": "ada4432-1wbcpz-r7.kicad_sym",+ "footprint": "ada4432-1wbcpz-r7.kicad_mod",+ "model_3d": "ada4432-1wbcpz-r7-hero.glb",+ "model_3d_plain": "ada4432-1wbcpz-r7-etched.glb",+ "model_3d_step": "ada4432-1wbcpz-r7-etched.step",+ "model_3d_step_plain": "ada4432-1wbcpz-r7.step",+ "lbr": "ada4432-1wbcpz-r7.lbr"+ },+ "distributor_links": {+ "lcsc": "C654102",+ "digikey": "505-ADA4432-1WBCPZ-R7TR-ND",+ "mouser": "584-ADA4432-1WBCPZR7"+ },+ "distributor_check": {+ "checked_at": "2026-10-30T20:54:35Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "505-ADA4432-1WBCPZ-R7TR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "584-ADA4432-1WBCPZR7",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; do not connect to this pin."+ },+ {+ "number": "2",+ "name": "STB",+ "type": "output",+ "description": "Short-to-battery indicator output; logic high indicates a short-to-battery condition and logic low indicates normal operation."+ },+ {+ "number": "3",+ "name": "+VS",+ "type": "power_in",+ "description": "Positive power supply (2.6 V to 3.6 V operating range); bypass with a 0.1 µF capacitor to GND."+ },+ {+ "number": "4",+ "name": "OUT",+ "type": "output",+ "description": "Amplifier output, protected against short-to-battery overvoltage up to 18 V and short to ground."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; do not connect to this pin."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Power supply ground pin."+ },+ {+ "number": "7",+ "name": "ENA",+ "type": "input",+ "description": "Enable function; connect to +VS or float for normal operation, connect to GND to disable the device (internally pulled up to +VS through 250 kΩ)."+ },+ {+ "number": "8",+ "name": "IN",+ "type": "input",+ "description": "Amplifier input; input voltage range is typically 0 to 1.4 V."+ },+ {+ "number": "9",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: EPAD is not numbered in the datasheet; the datasheet says it 'can be connected to the ground plane' ; Datasheet only says the input range is limited by the output voltage range; the 0 to 1.4 V figure in"+ ],+ "pages_sent": 15,+ "cost_usd": 0.1312,+ "at": "2026-10-30T20:54:23"+ },+ "datasheet": {+ "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADA4432-1_4433-1.pdf",+ "pages": 24,+ "sha256": "1af22196e01fde44",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ada4432-1wbcpz-r7.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.23,+ 3,+ 0.639+ ],+ "zmin_mm": -0.041,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "09ee199ea4ed05f0573c050488b79ded52131b92c3d81e036d9d27b5d0167adc",+ "checked": "2026-10-30",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ada4432-1wbcpz-r7-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.23,+ 3,+ 0.639+ ],+ "zmin_mm": -0.041,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "352e628b91bb0beeff0f54501515c99ca62e8c061066b6aaf353be0822fcbcd0",+ "checked": "2026-10-30",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>ada4432-1wbcpz-r7</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>ada4432-1wbcpz-r7</title>