← Commit history
README.md+80−89@@ -8,34 +8,34 @@ AD9225ARSZ from Analog Devices, in a SSOP-28-208mil. Pinout and pin descriptions | Pin | Name | Type | Function | |---|---|---|---|-| 1 | CLK | input | Single clock input that controls all internal conversion cycles; logic threshold is AVDD/2, and tCH and tCL must each be at least 18 ns (clock period 40 ns minimum). |-| 2 | BIT 12 | output | Least significant bit of the straight-binary output data word. |-| 3 | BIT 11 | output | Data output bit 11 of the straight-binary output word. |-| 4 | BIT 10 | output | Data output bit 10 of the straight-binary output word. |-| 5 | BIT 9 | output | Data output bit 9 of the straight-binary output word. |-| 6 | BIT 8 | output | Data output bit 8 of the straight-binary output word. |-| 7 | BIT 7 | output | Data output bit 7 of the straight-binary output word. |-| 8 | BIT 6 | output | Data output bit 6 of the straight-binary output word. |-| 9 | BIT 5 | output | Data output bit 5 of the straight-binary output word. |-| 10 | BIT 4 | output | Data output bit 4 of the straight-binary output word. |-| 11 | BIT 3 | output | Data output bit 3 of the straight-binary output word. |-| 12 | BIT 2 | output | Data output bit 2 of the straight-binary output word. |-| 13 | BIT 1 | output | Most significant data output bit; combined with OTR it distinguishes low from high overflow. |-| 14 | OTR | output | Out-of-range indicator that goes high when the analog input is beyond the input range, with the same pipeline latency as the data. |-| 15 | AVDD | power_in | 5 V analog supply, nominal 5 V with 4.75 V to 5.25 V operating range (±5%). |-| 16 | AVSS | power_in | Analog ground, nominally 0 V; to be joined directly with DRVSS under the device. |-| 17 | SENSE | input | Reference select: tie to AVSS for VREF = 2.0 V, to VREF for 1.0 V, or to AVDD to disable the internal reference amplifier for an external reference. |-| 18 | VREF | power_in | Reference I/O that sets the full-scale input span as 2 × VREF; it can be driven by an external reference when SENSE is tied to AVDD, and requires a 10 µF tantalum plus 0.1 µF ceramic bypass to REFCOM. |-| 19 | REFCOM | power_in | Reference common, connected to AVSS (shorting SENSE to REFCOM selects the 2.0 V internal reference mode). |-| 20 | CAPB | passive | Noise reduction pin carrying the internal reference voltage; requires the recommended CAPT/CAPB decoupling network with 0.1 µF and 10 µF capacitors. |-| 21 | CAPT | passive | Noise reduction pin carrying the internal reference voltage; requires the recommended CAPT/CAPB decoupling network with 0.1 µF and 10 µF capacitors. |-| 22 | CML | passive | Common-mode level at approximately AVDD/2 that must be decoupled with at least 0.1 µF and buffered if used for any external biasing. |-| 23 | VINA | input | Analog input pin (+); VCORE = VINA − VINB must satisfy −VREF ≤ VCORE ≤ VREF and VINA must stay between AVSS − 0.3 V and AVDD + 0.3 V. |-| 24 | VINB | input | Analog input pin (−); must stay between AVSS − 0.3 V and AVDD + 0.3 V and satisfy the differential limit −VREF ≤ VCORE ≤ VREF together with VINA. |-| 25 | AVSS | power_in | Analog ground, nominally 0 V; second analog ground pin co-located with AVDD. |-| 26 | AVDD | power_in | 5 V analog supply, nominal 5 V with 4.75 V to 5.25 V operating range (±5%); second analog supply pin. |-| 27 | DRVSS | power_in | Digital output driver ground, to be joined directly to AVSS under the device. |-| 28 | DRVDD | power_in | Digital output driver supply from 3 V to 5 V (2.85 V to 5.25 V operating) to interface with 3 V or 5 V logic. |+| 1 | CLK | input | Clock input that controls all internal conversion cycles; the ADC samples on the rising edge, the logic threshold is AVDD/2, and tCH and tCL must be at least 18 ns (45% to 55% duty cycle at 25 MSPS). |+| 2 | BIT 12 | output | Least significant bit of the straight binary digital output, latched into the output buffer and driven from the DRVDD supply. |+| 3 | BIT 11 | output | Digital data output bit 11 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic). |+| 4 | BIT 10 | output | Digital data output bit 10 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic). |+| 5 | BIT 9 | output | Digital data output bit 9 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic). |+| 6 | BIT 8 | output | Digital data output bit 8 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic). |+| 7 | BIT 7 | output | Digital data output bit 7 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic). |+| 8 | BIT 6 | output | Digital data output bit 6 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic). |+| 9 | BIT 5 | output | Digital data output bit 5 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic). |+| 10 | BIT 4 | output | Digital data output bit 4 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic). |+| 11 | BIT 3 | output | Digital data output bit 3 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic). |+| 12 | BIT 2 | output | Digital data output bit 2 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic). |+| 13 | BIT 1 | output | Most significant data output bit; used with OTR to determine low or high overflow. |+| 14 | OTR | output | Out-of-range indicator, updated with the data and high when the analog input exceeds the input range (overrange/underrange detection with MSB). |+| 15 | AVDD | power_in | 5 V analog supply (4.75 V to 5.25 V operating); absolute maximum AVDD to AVSS is -0.3 V to +6.5 V. |+| 16 | AVSS | power_in | Analog ground; must be joined directly to DRVSS under the device. |+| 17 | SENSE | input | Reference select: tie to AVSS for 2.0 V VREF, to VREF for 1.0 V VREF, or to AVDD to disable the internal reference amplifier for an external reference. |+| 18 | VREF | power_in | Input span select and reference I/O; full-scale input span equals 2 x VREF, and it must be bypassed to REFCOM with 10 µF tantalum in parallel with 0.1 µF ceramic. |+| 19 | REFCOM | power_in | Reference common, connected to AVSS (analog ground) as the return for VREF. |+| 20 | CAPB | passive | Noise reduction pin carrying the internal reference voltage; requires the CAPT/CAPB decoupling network (0.1 µF and 10 µF) when the internal or external reference is used. |+| 21 | CAPT | passive | Noise reduction pin carrying the internal reference voltage; requires the CAPT/CAPB decoupling network (0.1 µF and 10 µF) when the internal or external reference is used. |+| 22 | CML | passive | Internal common-mode level (approximately AVDD/2) that must be decoupled with at least 0.1 µF and should be buffered if used for any external biasing. |+| 23 | VINA | input | Analog input (+); must stay between AVSS - 0.3 V and AVDD + 0.3 V, with VINA - VINB limited to within ±VREF. |+| 24 | VINB | input | Analog input (-); must stay between AVSS - 0.3 V and AVDD + 0.3 V, with VINA - VINB limited to within ±VREF. |+| 25 | AVSS | power_in | Analog ground; second analog ground pin, co-located with AVDD for decoupling. |+| 26 | AVDD | power_in | 5 V analog supply (4.75 V to 5.25 V operating); second analog supply pin, co-located with AVSS for decoupling. |+| 27 | DRVSS | power_in | Digital output driver ground; must be joined to AVSS directly under the device. |+| 28 | DRVDD | power_in | Digital output driver supply, 3 V to 5 V (2.85 V to 5.25 V operating) to interface with 3 V or 5 V logic. | ## Key specifications @@ -52,66 +52,57 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Analog supply voltage AVDD | AVDD | 4.75 | 5 | 5.25 | V | ±5% AVDD operating | 2 |-| Digital output driver supply DRVDD | DRVDD | 2.85 | | 5.25 | V | ±5% DRVDD operating | 2 |-| Operating temperature range | | -40 | | 85 | °C | Ordering guide AD9225ARSZ: -40°C to +85°C | 24 |-| AVDD to AVSS | AVDD | -0.3 | | 6.5 | V | | 4 |-| DRVDD to DRVSS | DRVDD | -0.3 | | 6.5 | V | | 4 |-| AVSS to DRVSS | AVSS | -0.3 | | 0.3 | V | | 4 |-| AVDD to DRVDD | AVDD | -6.5 | | 6.5 | V | | 4 |-| REFCOM to AVSS | REFCOM | -0.3 | | 0.3 | V | | 4 |-| CLK to AVSS | CLK | -0.3 | | | V | Printed max is AVDD + 0.3 V (expression, not numeric) | 4 |-| Digital outputs to DRVSS | | -0.3 | | | V | Printed max is DRVDD + 0.3 V (expression, not numeric) | 4 |-| VINA, VINB to AVSS | VINA, VINB | -0.3 | | | V | Printed max is AVDD + 0.3 V (expression, not numeric) | 4 |-| VREF to AVSS | VREF | -0.3 | | | V | Printed max is AVDD + 0.3 V (expression, not numeric) | 4 |-| SENSE to AVSS | SENSE | -0.3 | | | V | Printed max is AVDD + 0.3 V (expression, not numeric) | 4 |-| CAPB, CAPT to AVSS | CAPB, CAPT | -0.3 | | | V | Printed max is AVDD + 0.3 V (expression, not numeric) | 4 |-| Junction temperature | | | | 150 | °C | | 4 |-| Storage temperature | | -65 | | 150 | °C | | 4 |-| Integral Nonlinearity (INL) | | -2.5 | 1 | 2.5 | LSB | | 2 |-| Differential Nonlinearity (DNL) | | -1 | 0.4 | 1 | LSB | | 2 |-| Zero Error | | -0.6 | 0.3 | 0.6 | % FSR | @ 25°C | 2 |-| Gain Error (note 1) | | -2.2 | 0.5 | 2.2 | % FSR | @ 25°C; includes internal voltage reference error | 2 |-| Gain Error (note 2) | | -1.7 | 0.4 | 1.7 | % FSR | @ 25°C; excludes internal voltage reference error | 2 |-| Zero Error temperature drift | | -2 | | 2 | ppm/°C | TMIN to TMAX | 2 |-| Gain Error temperature drift (note 1) | | -26 | | 26 | ppm/°C | Includes internal voltage reference error | 2 |-| Gain Error temperature drift (note 2) | | -0.4 | | 0.4 | ppm/°C | Excludes internal voltage reference error | 2 |-| AVDD power supply rejection | | -0.35 | 0.1 | 0.35 | % FSR | AVDD (+5 V ± 0.25 V) | 2 |-| Output Voltage Tolerance (1 V mode) | | -17 | 5 | 17 | mV | 1 V mode | 2 |-| Output Voltage Tolerance (2.0 V mode) | | -35 | 10 | 35 | mV | 2.0 V mode | 2 |-| Load Regulation | | | 1 | 3.4 | mV | 1 mA load current (in addition to that required by the AD9225) | 2 |-| Supply current IAVDD | IAVDD | | 65 | 72.5 | mA | | 2 |-| Supply current IDRVDD | IDRVDD | | 2 | 4 | mA | | 2 |-| Power consumption, external reference | | | 280 | 310 | mW | External reference, VREF = 1 V | 2 |-| Power consumption, external reference | | | 335 | 373 | mW | External reference, VREF = 2 V | 2 |-| Signal-to-Noise and Distortion (S/N+D) | | 67.4 | 70.7 | | dB | fINPUT = 2.5 MHz | 3 |-| Signal-to-Noise and Distortion (S/N+D) | | 66.7 | 69.6 | | dB | fINPUT = 10 MHz | 3 |-| Signal-to-Noise Ratio (SNR) | | 69 | 71 | | dB | fINPUT = 2.5 MHz | 3 |-| Signal-to-Noise Ratio (SNR) | | 68.2 | 70 | | dB | fINPUT = 10 MHz | 3 |-| Total Harmonic Distortion (THD) | | | -82 | -72 | dB | fINPUT = 2.5 MHz | 3 |-| Total Harmonic Distortion (THD) | | | -81 | -71.5 | dB | fINPUT = 10 MHz | 3 |-| Spurious-Free Dynamic Range (SFDR) | | 73 | -85 | | dB | fINPUT = 2.5 MHz | 3 |-| Spurious-Free Dynamic Range (SFDR) | | 72.5 | -83 | | dB | fINPUT = 10 MHz | 3 |-| CLOCK Pulse Width High | tCH | 18 | | | ns | Switching specifications, CL = 20 pF; minimum per clock section | 3 |-| CLOCK Pulse Width Low | tCL | 18 | | | ns | Switching specifications, CL = 20 pF; minimum per clock section | 3 |-| Output Delay | tOD | | | 13 | ns | CL = 20 pF | 3 |-| High Level Input Voltage | VIH | 3.5 | | | V | | 3 |-| Low Level Input Voltage | VIL | | | 1 | V | | 3 |-| High Level Input Current | IIH | -10 | | 10 | mA | VIN = DRVDD | 3 |-| Low Level Input Current | IIL | -10 | | 10 | mA | VIN = 0 V | 3 |-| High Level Output Voltage | VOH | 4.5 | | | V | IOH = 50 mA | 3 |-| High Level Output Voltage | VOH | 2.4 | | | V | IOH = 0.5 mA | 3 |-| Low Level Output Voltage | VOL | | | 0.4 | V | IOL = 1.6 mA | 3 |-| Low Level Output Voltage | VOL | | | 0.1 | V | IOL = 50 mA | 3 |-| High Level Output Voltage (DRVDD = 3 V) | VOH | 2.95 | | | V | DRVDD = 3 V; IOH = 50 mA | 3 |-| High Level Output Voltage (DRVDD = 3 V) | VOH | 2.8 | | | V | DRVDD = 3 V; IOH = 0.5 mA | 3 |-| Low Level Output Voltage (DRVDD = 3 V) | VOL | | | 0.4 | V | DRVDD = 3 V; IOL = 1.6 mA | 3 |-| Low Level Output Voltage (DRVDD = 3 V) | VOL | | | 0.05 | V | DRVDD = 3 V; IOL = 50 mA | 3 |-| Input-referred noise | | | 0.35 | | LSB rms | VREF = 1.0 V | 2 |-| Input-referred noise | | | 0.17 | | LSB rms | VREF = 2.0 V | 2 |-| Input Capacitance (analog) | | | 10 | | pF | | 2 |-| Power consumption, internal reference | | | 290 | | mW | Internal reference, VREF = 1 V | 2 |-| Power consumption, internal reference | | | 345 | | mW | Internal reference, VREF = 2 V | 2 |+| AVDD to AVSS | | -0.3 | | 6.5 | V | with respect to AVSS | 4 |+| DRVDD to DRVSS | | -0.3 | | 6.5 | V | with respect to DRVSS | 4 |+| AVSS to DRVSS | | -0.3 | | 0.3 | V | with respect to DRVSS | 4 |+| AVDD to DRVDD | | -6.5 | | 6.5 | V | AVDD with respect to DRVDD | 4 |+| REFCOM to AVSS | | -0.3 | | 0.3 | V | with respect to AVSS | 4 |+| CLK to AVSS | | -0.3 | | | V | with respect to AVSS; max printed as AVDD + 0.3 V | 4 |+| Digital outputs to DRVSS | | -0.3 | | | V | with respect to DRVSS; max printed as DRVDD + 0.3 V | 4 |+| VINA, VINB to AVSS | | -0.3 | | | V | with respect to AVSS; max printed as AVDD + 0.3 V | 4 |+| VREF to AVSS | | -0.3 | | | V | with respect to AVSS; max printed as AVDD + 0.3 V | 4 |+| SENSE to AVSS | | -0.3 | | | V | with respect to AVSS; max printed as AVDD + 0.3 V | 4 |+| CAPB, CAPT to AVSS | | -0.3 | | | V | with respect to AVSS; max printed as AVDD + 0.3 V | 4 |+| Junction Temperature | | | | 150 | °C | | 4 |+| Storage Temperature | | -65 | | 150 | °C | | 4 |+| Lead Temperature | | | | 300 | °C | 10 sec | 4 |+| Operating ambient temperature range | | -40 | | 85 | °C | AR/ARS/ARSZ temperature range per ordering guide (TMIN to TMAX) | 24 |+| AVDD supply voltage | AVDD | 4.75 | 5 | 5.25 | V | ±5% AVDD operating | 2 |+| DRVDD supply voltage | DRVDD | 2.85 | | 5.25 | V | ±5% DRVDD operating | 2 |+| Clock duty cycle at 25 MSPS | | 45 | | 55 | % | 25 MSPS clock input; example from text | 18 |+| Supply current, analog | IAVDD | | 65 | 72.5 | mA | | 2 |+| Supply current, digital driver | IDRVDD | | 2 | 4 | mA | | 2 |+| Power consumption, external reference | | | 280 | 310 | mW | VREF = 1 V, external reference | 2 |+| Power consumption, external reference | | | 335 | 373 | mW | VREF = 2 V, external reference | 2 |+| Output voltage tolerance (1 V mode) | | | 5 | 17 | mV | Internal reference, 1 V mode; printed ± | 2 |+| Output voltage tolerance (2.0 V mode) | | | 10 | 35 | mV | Internal reference, 2.0 V mode; printed ± | 2 |+| Load regulation | | | 1 | 3.4 | mV | 1 mA load current (in addition to that required by the AD9225) | 2 |+| Power supply rejection, AVDD | | | 0.1 | 0.35 | % FSR | AVDD +5 V ±0.25 V; printed ± | 2 |+| Zero error | | | 0.3 | 0.6 | % FSR | @ 25°C; printed ± | 2 |+| Gain error (includes internal reference error) | | | 0.5 | 2.2 | % FSR | @ 25°C, includes internal voltage reference error; printed ± | 2 |+| Gain error (excludes internal reference error) | | | 0.4 | 1.7 | % FSR | @ 25°C, excludes internal voltage reference error; printed ± | 2 |+| Integral nonlinearity | INL | | 1 | 2.5 | LSB | | 2 |+| Differential nonlinearity | DNL | | 0.4 | 1 | LSB | | 2 |+| High level input voltage | VIH | 3.5 | | | V | | 3 |+| Low level input voltage | VIL | | | 1 | V | | 3 |+| High level input current | IIH | -10 | | 10 | mA | VIN = DRVDD | 3 |+| Low level input current | IIL | -10 | | 10 | mA | VIN = 0 V | 3 |+| High level output voltage (DRVDD 5 V) | VOH | 4.5 | | | V | IOH = 50 mA as printed | 3 |+| High level output voltage (DRVDD 5 V) | VOH | 2.4 | | | V | IOH = 0.5 mA | 3 |+| Low level output voltage (DRVDD 5 V) | VOL | | | 0.4 | V | IOL = 1.6 mA | 3 |+| Low level output voltage (DRVDD 5 V) | VOL | | | 0.1 | V | IOL = 50 mA as printed | 3 |+| High level output voltage (DRVDD 3 V) | VOH | 2.95 | | | V | DRVDD = 3 V, IOH = 50 mA as printed | 3 |+| High level output voltage (DRVDD 3 V) | VOH | 2.8 | | | V | DRVDD = 3 V, IOH = 0.5 mA | 3 |+| Low level output voltage (DRVDD 3 V) | VOL | | | 0.4 | V | DRVDD = 3 V, IOL = 1.6 mA | 3 |+| Low level output voltage (DRVDD 3 V) | VOL | | | 0.05 | V | DRVDD = 3 V, IOL = 50 mA as printed | 3 |+| Clock period | tC | 40 | | | ns | TMIN to TMAX, AVDD = 5 V, DRVDD = 5 V, CL = 20 pF | 3 |+| Clock pulse width high | tCH | 18 | | | ns | TMIN to TMAX, AVDD = 5 V, DRVDD = 5 V, CL = 20 pF | 3 |+| Clock pulse width low | tCL | 18 | | | ns | TMIN to TMAX, AVDD = 5 V, DRVDD = 5 V, CL = 20 pF | 3 |+| Output delay | tOD | | | 13 | ns | TMIN to TMAX, AVDD = 5 V, DRVDD = 5 V, CL = 20 pF | 3 |+| Signal-to-noise and distortion (S/N+D), fIN = 2.5 MHz | S/N+D | 67.4 | 70.7 | | dB | fINPUT = 2.5 MHz, fSAMPLE = 25 MSPS, VREF = 2.0 V, differential input | 3 |+| Signal-to-noise and distortion (S/N+D), fIN = 10 MHz | S/N+D | 66.7 | 69.6 | | dB | fINPUT = 10 MHz, fSAMPLE = 25 MSPS, VREF = 2.0 V, differential input | 3 |+| Signal-to-noise ratio (SNR), fIN = 2.5 MHz | SNR | 69 | 71 | | dB | fINPUT = 2.5 MHz, fSAMPLE = 25 MSPS, VREF = 2.0 V, differential input | 3 |+| Signal-to-noise ratio (SNR), fIN = 10 MHz | SNR | 68.2 | 70 | | dB | fINPUT = 10 MHz, fSAMPLE = 25 MSPS, VREF = 2.0 V, differential input | 3 | ## CAD (KiCad official) @@ -124,7 +115,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD9225.pdf) (25 pp, sha256 `cc5bac4de16cd9dd`, retrieved 2026-11-13, tier: manufacturer)+- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD9225.pdf) (25 pp, sha256 `cc5bac4de16cd9dd`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+36−37@@ -1,6 +1,6 @@ { "slug": "ad9225arsz",- "version": "0.1.2",+ "version": "0.1.3", "type": "component", "description": "Analog Devices Analog To Digital Converters (ADCs), SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "584-AD9225ARSZ" }, "distributor_check": {- "checked_at": "2026-11-13T00:43:16Z",+ "checked_at": "2026-11-17T20:05:09Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "AD9225ARSZ-ND",@@ -69,169 +69,169 @@ "number": "1", "name": "CLK", "type": "input",- "description": "Single clock input that controls all internal conversion cycles; logic threshold is AVDD/2, and tCH and tCL must each be at least 18 ns (clock period 40 ns minimum)."+ "description": "Clock input that controls all internal conversion cycles; the ADC samples on the rising edge, the logic threshold is AVDD/2, and tCH and tCL must be at least 18 ns (45% to 55% duty cycle at 25 MSPS)." }, { "number": "2", "name": "BIT 12", "type": "output",- "description": "Least significant bit of the straight-binary output data word."+ "description": "Least significant bit of the straight binary digital output, latched into the output buffer and driven from the DRVDD supply." }, { "number": "3", "name": "BIT 11", "type": "output",- "description": "Data output bit 11 of the straight-binary output word."+ "description": "Digital data output bit 11 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "4", "name": "BIT 10", "type": "output",- "description": "Data output bit 10 of the straight-binary output word."+ "description": "Digital data output bit 10 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "5", "name": "BIT 9", "type": "output",- "description": "Data output bit 9 of the straight-binary output word."+ "description": "Digital data output bit 9 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "6", "name": "BIT 8", "type": "output",- "description": "Data output bit 8 of the straight-binary output word."+ "description": "Digital data output bit 8 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "7", "name": "BIT 7", "type": "output",- "description": "Data output bit 7 of the straight-binary output word."+ "description": "Digital data output bit 7 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "8", "name": "BIT 6", "type": "output",- "description": "Data output bit 6 of the straight-binary output word."+ "description": "Digital data output bit 6 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "9", "name": "BIT 5", "type": "output",- "description": "Data output bit 5 of the straight-binary output word."+ "description": "Digital data output bit 5 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "10", "name": "BIT 4", "type": "output",- "description": "Data output bit 4 of the straight-binary output word."+ "description": "Digital data output bit 4 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "11", "name": "BIT 3", "type": "output",- "description": "Data output bit 3 of the straight-binary output word."+ "description": "Digital data output bit 3 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "12", "name": "BIT 2", "type": "output",- "description": "Data output bit 2 of the straight-binary output word."+ "description": "Digital data output bit 2 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "13", "name": "BIT 1", "type": "output",- "description": "Most significant data output bit; combined with OTR it distinguishes low from high overflow."+ "description": "Most significant data output bit; used with OTR to determine low or high overflow." }, { "number": "14", "name": "OTR", "type": "output",- "description": "Out-of-range indicator that goes high when the analog input is beyond the input range, with the same pipeline latency as the data."+ "description": "Out-of-range indicator, updated with the data and high when the analog input exceeds the input range (overrange/underrange detection with MSB)." }, { "number": "15", "name": "AVDD", "type": "power_in",- "description": "5 V analog supply, nominal 5 V with 4.75 V to 5.25 V operating range (±5%)."+ "description": "5 V analog supply (4.75 V to 5.25 V operating); absolute maximum AVDD to AVSS is -0.3 V to +6.5 V." }, { "number": "16", "name": "AVSS", "type": "power_in",- "description": "Analog ground, nominally 0 V; to be joined directly with DRVSS under the device."+ "description": "Analog ground; must be joined directly to DRVSS under the device." }, { "number": "17", "name": "SENSE", "type": "input",- "description": "Reference select: tie to AVSS for VREF = 2.0 V, to VREF for 1.0 V, or to AVDD to disable the internal reference amplifier for an external reference."+ "description": "Reference select: tie to AVSS for 2.0 V VREF, to VREF for 1.0 V VREF, or to AVDD to disable the internal reference amplifier for an external reference." }, { "number": "18", "name": "VREF", "type": "power_in",- "description": "Reference I/O that sets the full-scale input span as 2 × VREF; it can be driven by an external reference when SENSE is tied to AVDD, and requires a 10 µF tantalum plus 0.1 µF ceramic bypass to REFCOM."+ "description": "Input span select and reference I/O; full-scale input span equals 2 x VREF, and it must be bypassed to REFCOM with 10 µF tantalum in parallel with 0.1 µF ceramic." }, { "number": "19", "name": "REFCOM", "type": "power_in",- "description": "Reference common, connected to AVSS (shorting SENSE to REFCOM selects the 2.0 V internal reference mode)."+ "description": "Reference common, connected to AVSS (analog ground) as the return for VREF." }, { "number": "20", "name": "CAPB", "type": "passive",- "description": "Noise reduction pin carrying the internal reference voltage; requires the recommended CAPT/CAPB decoupling network with 0.1 µF and 10 µF capacitors."+ "description": "Noise reduction pin carrying the internal reference voltage; requires the CAPT/CAPB decoupling network (0.1 µF and 10 µF) when the internal or external reference is used." }, { "number": "21", "name": "CAPT", "type": "passive",- "description": "Noise reduction pin carrying the internal reference voltage; requires the recommended CAPT/CAPB decoupling network with 0.1 µF and 10 µF capacitors."+ "description": "Noise reduction pin carrying the internal reference voltage; requires the CAPT/CAPB decoupling network (0.1 µF and 10 µF) when the internal or external reference is used." }, { "number": "22", "name": "CML", "type": "passive",- "description": "Common-mode level at approximately AVDD/2 that must be decoupled with at least 0.1 µF and buffered if used for any external biasing."+ "description": "Internal common-mode level (approximately AVDD/2) that must be decoupled with at least 0.1 µF and should be buffered if used for any external biasing." }, { "number": "23", "name": "VINA", "type": "input",- "description": "Analog input pin (+); VCORE = VINA − VINB must satisfy −VREF ≤ VCORE ≤ VREF and VINA must stay between AVSS − 0.3 V and AVDD + 0.3 V."+ "description": "Analog input (+); must stay between AVSS - 0.3 V and AVDD + 0.3 V, with VINA - VINB limited to within ±VREF." }, { "number": "24", "name": "VINB", "type": "input",- "description": "Analog input pin (−); must stay between AVSS − 0.3 V and AVDD + 0.3 V and satisfy the differential limit −VREF ≤ VCORE ≤ VREF together with VINA."+ "description": "Analog input (-); must stay between AVSS - 0.3 V and AVDD + 0.3 V, with VINA - VINB limited to within ±VREF." }, { "number": "25", "name": "AVSS", "type": "power_in",- "description": "Analog ground, nominally 0 V; second analog ground pin co-located with AVDD."+ "description": "Analog ground; second analog ground pin, co-located with AVDD for decoupling." }, { "number": "26", "name": "AVDD", "type": "power_in",- "description": "5 V analog supply, nominal 5 V with 4.75 V to 5.25 V operating range (±5%); second analog supply pin."+ "description": "5 V analog supply (4.75 V to 5.25 V operating); second analog supply pin, co-located with AVSS for decoupling." }, { "number": "27", "name": "DRVSS", "type": "power_in",- "description": "Digital output driver ground, to be joined directly to AVSS under the device."+ "description": "Digital output driver ground; must be joined to AVSS directly under the device." }, { "number": "28", "name": "DRVDD", "type": "power_in",- "description": "Digital output driver supply from 3 V to 5 V (2.85 V to 5.25 V operating) to interface with 3 V or 5 V logic."+ "description": "Digital output driver supply, 3 V to 5 V (2.85 V to 5.25 V operating) to interface with 3 V or 5 V logic." } ], "provenance": {@@ -245,12 +245,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Datasheet is a single document covering SOIC and SSOP; the ordering guide lists AD9225ARSZ as 28-Lea; Pins 3–12 are given as a range (BIT 11–2) in the datasheet table and were expanded to one pin per bi; Pin types were inferred from function: CAPT, CAPB and CML are classed as passive because the datashe",- "4/28 pins cited to the wrong page (name found elsewhere): ['17:SENSE@p10', '18:VREF@p10', '23:VINA@p8', '24:VINB@p8']"+ "extractor flagged: The datasheet gives pins 3-12 only as the range 'BIT 11-2' in the pin table; the pin-by-pin mapping ; KiCad type for REFCOM (power_in, since tied to AVSS) and CML (passive, internal bias point) is an in; Pin descriptions for CAPB and CAPT are based on the 'Noise Reduction Pin' label and the reference op" ], "pages_sent": 25,- "cost_usd": 0.1871,- "at": "2026-11-13T00:43:01"+ "cost_usd": 0.1893,+ "at": "2026-11-17T20:04:38" }, "datasheet": { "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD9225.pdf",@@ -287,7 +286,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -305,8 +304,8 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "3b6a4827fe1db23b33446bcb4d9a489ce4676e93c3e83aaafbd8a4995aead944",- "checked": "2026-11-13",+ "sha256": "83df0bedde905c708e26751a7a8be7b4ac094115beaf7b0b437f0344cfd3ef45",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+39−38@@ -4,7 +4,7 @@ "slug": "ad9225arsz", "title": "AD9225ARSZ", "brief": "Analog Devices Analog To Digital Converters (ADCs), SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.2",+ "version": "0.1.3", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "584-AD9225ARSZ" }, "distributor_check": {- "checked_at": "2026-11-13T00:43:16Z",+ "checked_at": "2026-11-17T20:05:09Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "AD9225ARSZ-ND",@@ -52,169 +52,169 @@ "number": "1", "name": "CLK", "type": "input",- "description": "Single clock input that controls all internal conversion cycles; logic threshold is AVDD/2, and tCH and tCL must each be at least 18 ns (clock period 40 ns minimum)."+ "description": "Clock input that controls all internal conversion cycles; the ADC samples on the rising edge, the logic threshold is AVDD/2, and tCH and tCL must be at least 18 ns (45% to 55% duty cycle at 25 MSPS)." }, { "number": "2", "name": "BIT 12", "type": "output",- "description": "Least significant bit of the straight-binary output data word."+ "description": "Least significant bit of the straight binary digital output, latched into the output buffer and driven from the DRVDD supply." }, { "number": "3", "name": "BIT 11", "type": "output",- "description": "Data output bit 11 of the straight-binary output word."+ "description": "Digital data output bit 11 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "4", "name": "BIT 10", "type": "output",- "description": "Data output bit 10 of the straight-binary output word."+ "description": "Digital data output bit 10 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "5", "name": "BIT 9", "type": "output",- "description": "Data output bit 9 of the straight-binary output word."+ "description": "Digital data output bit 9 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "6", "name": "BIT 8", "type": "output",- "description": "Data output bit 8 of the straight-binary output word."+ "description": "Digital data output bit 8 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "7", "name": "BIT 7", "type": "output",- "description": "Data output bit 7 of the straight-binary output word."+ "description": "Digital data output bit 7 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "8", "name": "BIT 6", "type": "output",- "description": "Data output bit 6 of the straight-binary output word."+ "description": "Digital data output bit 6 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "9", "name": "BIT 5", "type": "output",- "description": "Data output bit 5 of the straight-binary output word."+ "description": "Digital data output bit 5 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "10", "name": "BIT 4", "type": "output",- "description": "Data output bit 4 of the straight-binary output word."+ "description": "Digital data output bit 4 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "11", "name": "BIT 3", "type": "output",- "description": "Data output bit 3 of the straight-binary output word."+ "description": "Digital data output bit 3 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "12", "name": "BIT 2", "type": "output",- "description": "Data output bit 2 of the straight-binary output word."+ "description": "Digital data output bit 2 of the straight binary output word, referenced to DRVDD (3 V to 5 V logic)." }, { "number": "13", "name": "BIT 1", "type": "output",- "description": "Most significant data output bit; combined with OTR it distinguishes low from high overflow."+ "description": "Most significant data output bit; used with OTR to determine low or high overflow." }, { "number": "14", "name": "OTR", "type": "output",- "description": "Out-of-range indicator that goes high when the analog input is beyond the input range, with the same pipeline latency as the data."+ "description": "Out-of-range indicator, updated with the data and high when the analog input exceeds the input range (overrange/underrange detection with MSB)." }, { "number": "15", "name": "AVDD", "type": "power_in",- "description": "5 V analog supply, nominal 5 V with 4.75 V to 5.25 V operating range (±5%)."+ "description": "5 V analog supply (4.75 V to 5.25 V operating); absolute maximum AVDD to AVSS is -0.3 V to +6.5 V." }, { "number": "16", "name": "AVSS", "type": "power_in",- "description": "Analog ground, nominally 0 V; to be joined directly with DRVSS under the device."+ "description": "Analog ground; must be joined directly to DRVSS under the device." }, { "number": "17", "name": "SENSE", "type": "input",- "description": "Reference select: tie to AVSS for VREF = 2.0 V, to VREF for 1.0 V, or to AVDD to disable the internal reference amplifier for an external reference."+ "description": "Reference select: tie to AVSS for 2.0 V VREF, to VREF for 1.0 V VREF, or to AVDD to disable the internal reference amplifier for an external reference." }, { "number": "18", "name": "VREF", "type": "power_in",- "description": "Reference I/O that sets the full-scale input span as 2 × VREF; it can be driven by an external reference when SENSE is tied to AVDD, and requires a 10 µF tantalum plus 0.1 µF ceramic bypass to REFCOM."+ "description": "Input span select and reference I/O; full-scale input span equals 2 x VREF, and it must be bypassed to REFCOM with 10 µF tantalum in parallel with 0.1 µF ceramic." }, { "number": "19", "name": "REFCOM", "type": "power_in",- "description": "Reference common, connected to AVSS (shorting SENSE to REFCOM selects the 2.0 V internal reference mode)."+ "description": "Reference common, connected to AVSS (analog ground) as the return for VREF." }, { "number": "20", "name": "CAPB", "type": "passive",- "description": "Noise reduction pin carrying the internal reference voltage; requires the recommended CAPT/CAPB decoupling network with 0.1 µF and 10 µF capacitors."+ "description": "Noise reduction pin carrying the internal reference voltage; requires the CAPT/CAPB decoupling network (0.1 µF and 10 µF) when the internal or external reference is used." }, { "number": "21", "name": "CAPT", "type": "passive",- "description": "Noise reduction pin carrying the internal reference voltage; requires the recommended CAPT/CAPB decoupling network with 0.1 µF and 10 µF capacitors."+ "description": "Noise reduction pin carrying the internal reference voltage; requires the CAPT/CAPB decoupling network (0.1 µF and 10 µF) when the internal or external reference is used." }, { "number": "22", "name": "CML", "type": "passive",- "description": "Common-mode level at approximately AVDD/2 that must be decoupled with at least 0.1 µF and buffered if used for any external biasing."+ "description": "Internal common-mode level (approximately AVDD/2) that must be decoupled with at least 0.1 µF and should be buffered if used for any external biasing." }, { "number": "23", "name": "VINA", "type": "input",- "description": "Analog input pin (+); VCORE = VINA − VINB must satisfy −VREF ≤ VCORE ≤ VREF and VINA must stay between AVSS − 0.3 V and AVDD + 0.3 V."+ "description": "Analog input (+); must stay between AVSS - 0.3 V and AVDD + 0.3 V, with VINA - VINB limited to within ±VREF." }, { "number": "24", "name": "VINB", "type": "input",- "description": "Analog input pin (−); must stay between AVSS − 0.3 V and AVDD + 0.3 V and satisfy the differential limit −VREF ≤ VCORE ≤ VREF together with VINA."+ "description": "Analog input (-); must stay between AVSS - 0.3 V and AVDD + 0.3 V, with VINA - VINB limited to within ±VREF." }, { "number": "25", "name": "AVSS", "type": "power_in",- "description": "Analog ground, nominally 0 V; second analog ground pin co-located with AVDD."+ "description": "Analog ground; second analog ground pin, co-located with AVDD for decoupling." }, { "number": "26", "name": "AVDD", "type": "power_in",- "description": "5 V analog supply, nominal 5 V with 4.75 V to 5.25 V operating range (±5%); second analog supply pin."+ "description": "5 V analog supply (4.75 V to 5.25 V operating); second analog supply pin, co-located with AVSS for decoupling." }, { "number": "27", "name": "DRVSS", "type": "power_in",- "description": "Digital output driver ground, to be joined directly to AVSS under the device."+ "description": "Digital output driver ground; must be joined to AVSS directly under the device." }, { "number": "28", "name": "DRVDD", "type": "power_in",- "description": "Digital output driver supply from 3 V to 5 V (2.85 V to 5.25 V operating) to interface with 3 V or 5 V logic."+ "description": "Digital output driver supply, 3 V to 5 V (2.85 V to 5.25 V operating) to interface with 3 V or 5 V logic." } ], "provenance": {@@ -228,12 +228,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Datasheet is a single document covering SOIC and SSOP; the ordering guide lists AD9225ARSZ as 28-Lea; Pins 3–12 are given as a range (BIT 11–2) in the datasheet table and were expanded to one pin per bi; Pin types were inferred from function: CAPT, CAPB and CML are classed as passive because the datashe",- "4/28 pins cited to the wrong page (name found elsewhere): ['17:SENSE@p10', '18:VREF@p10', '23:VINA@p8', '24:VINB@p8']"+ "extractor flagged: The datasheet gives pins 3-12 only as the range 'BIT 11-2' in the pin table; the pin-by-pin mapping ; KiCad type for REFCOM (power_in, since tied to AVSS) and CML (passive, internal bias point) is an in; Pin descriptions for CAPB and CAPT are based on the 'Noise Reduction Pin' label and the reference op" ], "pages_sent": 25,- "cost_usd": 0.1871,- "at": "2026-11-13T00:43:01"+ "cost_usd": 0.1893,+ "at": "2026-11-17T20:04:38" }, "datasheet": { "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD9225.pdf",@@ -270,7 +269,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -288,8 +287,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "3b6a4827fe1db23b33446bcb4d9a489ce4676e93c3e83aaafbd8a4995aead944",- "checked": "2026-11-13",+ "sha256": "83df0bedde905c708e26751a7a8be7b4ac094115beaf7b0b437f0344cfd3ef45",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -1115,5 +1114,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Analog Devices Analog To Digital Converters (ADCs), SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }