← Commit history
ad8422arz-r7: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+94−14
package.json+52−12@@ -51,51 +51,51 @@ "pins": [ { "number": "1",- "name": "\u2212IN",+ "name": "−IN", "type": "input",- "description": "Negative input terminal; input voltage range \u2212VS + 1.2 to +VS \u2212 1.2 V."+ "description": "Negative input terminal; input voltage range −VS + 1.2 to +VS − 1.2 V." }, { "number": "2", "name": "RG", "type": "passive",- "description": "Gain setting terminal; place resistor across RG pins to set gain according to G = 1 + (19.8 k\u03a9/RG) for gains from 1 to 1000."+ "description": "Gain setting terminal; place resistor across RG pins to set gain according to G = 1 + (19.8 kΩ/RG) for gains from 1 to 1000." }, { "number": "3", "name": "RG", "type": "passive",- "description": "Gain setting terminal; place resistor across RG pins to set gain according to G = 1 + (19.8 k\u03a9/RG) for gains from 1 to 1000."+ "description": "Gain setting terminal; place resistor across RG pins to set gain according to G = 1 + (19.8 kΩ/RG) for gains from 1 to 1000." }, { "number": "4", "name": "+IN", "type": "input",- "description": "Positive input terminal; input voltage range \u2212VS + 1.2 to +VS \u2212 1.2 V."+ "description": "Positive input terminal; input voltage range −VS + 1.2 to +VS − 1.2 V." }, { "number": "5",- "name": "\u2212VS",+ "name": "−VS", "type": "power_in",- "description": "Negative power supply terminal; \u00b12.3 V to \u00b118 V dual-supply or 4.6 V to 36 V single-supply operation."+ "description": "Negative power supply terminal; ±2.3 V to ±18 V dual-supply or 4.6 V to 36 V single-supply operation." }, { "number": "6", "name": "REF", "type": "input",- "description": "Reference voltage terminal; voltage range \u2212VS to +VS but must not exceed \u00b1VS by more than 0.3 V, use low impedance source below 1 \u03a9."+ "description": "Reference voltage terminal; voltage range −VS to +VS but must not exceed ±VS by more than 0.3 V, use low impedance source below 1 Ω." }, { "number": "7", "name": "VOUT", "type": "output",- "description": "Output terminal; rail-to-rail output with output swing \u2212VS + 0.2 to +VS \u2212 0.2 V at 10 k\u03a9 load."+ "description": "Output terminal; rail-to-rail output with output swing −VS + 0.2 to +VS − 0.2 V at 10 kΩ load." }, { "number": "8", "name": "+VS", "type": "power_in",- "description": "Positive power supply terminal; \u00b12.3 V to \u00b118 V dual-supply or 4.6 V to 36 V single-supply operation."+ "description": "Positive power supply terminal; ±2.3 V to ±18 V dual-supply or 4.6 V to 36 V single-supply operation." } ], "provenance": {@@ -130,6 +130,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ad8422arz-r7.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ad8422arz-r7-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "6444cebdc3fa8c4c86260b40eb08621562e5ef7daefc4a9cfe31ccfa10f2a5a7",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -115,7 +115,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ad8422arz-r7.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ad8422arz-r7-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "6444cebdc3fa8c4c86260b40eb08621562e5ef7daefc4a9cfe31ccfa10f2a5a7",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -163,4 +203,4 @@ "public": true }, "updated_at": "2026-09-24T15:43:10.835Z"-}+}