AD8226ARMZ-R7

@@ -51,51 +51,51 @@     "pins": [       {         "number": "1",-        "name": "\u2212IN",+        "name": "−IN",         "type": "input",-        "description": "Negative input with operating voltage range from \u2212VS \u2212 0.1 V to +VS \u2212 0.8 V at +25\u00b0C."+        "description": "Negative input with operating voltage range from −VS − 0.1 V to +VS − 0.8 V at +25°C."       },       {         "number": "2",         "name": "RG",         "type": "passive",-        "description": "Gain-setting resistor terminal; connect external resistor between pins 2 and 3 to set gain according to G = 1 + (49.4 k\u03a9/RG) for range 1 to 1000."+        "description": "Gain-setting resistor terminal; connect external resistor between pins 2 and 3 to set gain according to G = 1 + (49.4 kΩ/RG) for range 1 to 1000."       },       {         "number": "3",         "name": "RG",         "type": "passive",-        "description": "Gain-setting resistor terminal; connect external resistor between pins 2 and 3 to set gain according to G = 1 + (49.4 k\u03a9/RG) for range 1 to 1000."+        "description": "Gain-setting resistor terminal; connect external resistor between pins 2 and 3 to set gain according to G = 1 + (49.4 kΩ/RG) for range 1 to 1000."       },       {         "number": "4",         "name": "+IN",         "type": "input",-        "description": "Positive input with operating voltage range from \u2212VS \u2212 0.1 V to +VS \u2212 0.8 V at +25\u00b0C."+        "description": "Positive input with operating voltage range from −VS − 0.1 V to +VS − 0.8 V at +25°C."       },       {         "number": "5",-        "name": "\u2212VS",+        "name": "−VS",         "type": "power_in",-        "description": "Negative supply with operating range \u00b11.35 V to \u00b118 V for dual-supply operation or 0 V for single-supply operation."+        "description": "Negative supply with operating range ±1.35 V to ±18 V for dual-supply operation or 0 V for single-supply operation."       },       {         "number": "6",         "name": "REF",         "type": "input",-        "description": "Reference terminal with 100 k\u03a9 input impedance and voltage range from \u2212VS to +VS; must be driven from low impedance source below 2 \u03a9."+        "description": "Reference terminal with 100 kΩ input impedance and voltage range from −VS to +VS; must be driven from low impedance source below 2 Ω."       },       {         "number": "7",         "name": "VOUT",         "type": "output",-        "description": "Rail-to-rail output with swing from \u2212VS + 0.4 V to +VS \u2212 0.7 V with 2 k\u03a9 load at +25\u00b0C."+        "description": "Rail-to-rail output with swing from −VS + 0.4 V to +VS − 0.7 V with 2 kΩ load at +25°C."       },       {         "number": "8",         "name": "+VS",         "type": "power_in",-        "description": "Positive supply with operating range \u00b11.35 V to \u00b118 V for dual-supply operation or 2.2 to 36 V for single-supply operation."+        "description": "Positive supply with operating range ±1.35 V to ±18 V for dual-supply operation or 2.2 to 36 V for single-supply operation."       }     ],     "provenance": {@@ -130,6 +130,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ad8226armz-r7.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.9,+          3.0,+          0.95+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ad8226armz-r7-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.9,+          3.0,+          0.95+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "100fdcdf9e257676d31685033344d2d9521ed77e711320a00d676bdebb4a549f",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}