component
AD603ARZ-REEL
Public Made by Adomby adom
Analog Devices Low Noise Amplifiers (LNA) - RF, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
ad603arz-reel: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+90−10
package.json+48−8@@ -53,19 +53,19 @@ "number": "1", "name": "GPOS", "type": "input",- "description": "Differential gain control input (positive); 50 M\u03a9 input impedance, 25 mV/dB scaling factor, common-mode range \u22121.2 V to +2.0 V."+ "description": "Differential gain control input (positive); 50 MΩ input impedance, 25 mV/dB scaling factor, common-mode range −1.2 V to +2.0 V." }, { "number": "2", "name": "GNEG", "type": "input",- "description": "Differential gain control input (negative); 50 M\u03a9 input impedance, 25 mV/dB scaling factor, common-mode range \u22121.2 V to +2.0 V."+ "description": "Differential gain control input (negative); 50 MΩ input impedance, 25 mV/dB scaling factor, common-mode range −1.2 V to +2.0 V." }, { "number": "3", "name": "VINP", "type": "input",- "description": "Amplifier signal input; 100 \u03a9 input resistance, 1.3 nV/\u221aHz input noise spectral density, maximum peak input \u00b12 V."+ "description": "Amplifier signal input; 100 Ω input resistance, 1.3 nV/√Hz input noise spectral density, maximum peak input ±2 V." }, { "number": "4",@@ -83,19 +83,19 @@ "number": "6", "name": "VNEG", "type": "power_in",- "description": "Negative power supply input; recommended \u22125 V, operating range \u22124.75 V to \u22126.3 V for \u00b1supply configuration."+ "description": "Negative power supply input; recommended −5 V, operating range −4.75 V to −6.3 V for ±supply configuration." }, { "number": "7", "name": "VOUT", "type": "output",- "description": "Amplifier output; peak swing \u00b12.5 V minimum into 500 \u03a9 load, 90 MHz \u22123 dB bandwidth."+ "description": "Amplifier output; peak swing ±2.5 V minimum into 500 Ω load, 90 MHz −3 dB bandwidth." }, { "number": "8", "name": "VPOS", "type": "power_in",- "description": "Positive power supply input; recommended +5 V, operating range +4.75 V to +6.3 V for \u00b1supply configuration."+ "description": "Positive power supply input; recommended +5 V, operating range +4.75 V to +6.3 V for ±supply configuration." } ], "provenance": {@@ -130,6 +130,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ad603arz-reel.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ad603arz-reel-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "5bc884c99ccc10da1fa6f96b3285b1190df60dac4408726b5ac65864a8fb5720",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -115,7 +115,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ad603arz-reel.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ad603arz-reel-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "5bc884c99ccc10da1fa6f96b3285b1190df60dac4408726b5ac65864a8fb5720",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -163,4 +203,4 @@ "public": true }, "updated_at": "2026-09-24T15:35:40.192Z"-}+}