← Commit history

Publish 0.1.2

Ray ·6e2be7c2db · ·parent c3f8084
3 files changed +133−132
README.md+78−75
@@ -2,28 +2,28 @@  **Allegro MicroSystems, LLC** · Interface - Specialized · SOIC-16 -A5366CLWTR-T from Allegro MicroSystems, LLC, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+A5366CLWTR-T from Allegro MicroSystems, LLC, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | C1 | passive | Capacitor sets photoamplifier gain in supervisory mode, with Ae = 1 + (C1/10) with C1 in pF, and C1 should not exceed 0.1 µF. |-| 2 | C2 | passive | Capacitor sets photoamplifier gain in standby mode, with Ae = 1 + (C2/10) with C2 in pF, C2 should not exceed 0.1 µF, and a resistor must be installed in series with it. |-| 3 | DETECT | input | Photoamplifier input connected to the photodiode cathode, which is operated at zero bias and requires a shunt resistor in parallel. |-| 4 | STROBE | power_out | Strobed, regulated output of VDD - 5 V that serves as the low-side reference for the photoamplifier circuitry. |-| 5 | VDD | power_in | Positive supply pin that can range from 6 to 12 V with respect to VSS. |-| 6 | IRED | output | Pulsed base-current output for the external NPN transistor driving the IR emitter, whose beta should be greater than 100. |-| 7 | I/O | bidirectional | Interconnect pin that is driven high on local smoke and sampled every fourth clock cycle, requiring three consecutive high samples plus one additional cycle to alarm; it has an on-chip pull-down and must be left unconnected if unused. |-| 8 | HORN1 | output | Horn driver output connected to the piezoelectric transducer's metal support electrode. |-| 9 | HORN2 | output | Complementary horn driver output connected to the piezoelectric transducer's ceramic electrode. |-| 10 | FEEDBACK | input | Input connected to the piezoelectric feedback electrode, which must be connected to VSS if not used. |-| 11 | LED | output | Open-drain NMOS output that directly drives a visible LED; if no LED is used it should be replaced by an equivalent resistor (typically 500 to 1000 Ω) so battery loading stays about 10 mA. |-| 12 | OSC CAP | passive | Capacitor connection to VDD that, with a parallel resistor, sets the internal clock low time according to Tlow = 0.693 × ROSCCAP × COSCCAP. |-| 13 | TIMING RES | passive | Resistor connection to OSC CAP that sets the internal clock high time, which is also the IRED pulse width, according to Thigh = 0.693 × RTIMINGRES × COSCCAP. |-| 14 | VSS | power_in | Negative supply pin, connected to the negative supply potential (usually ground). |-| 15 | HUSH | input | Input with internal pull-down that enables timer mode when above 1.5 V and disables it when below 0.5 V, and also sets the smoke comparator reference during timer mode. |-| 16 | TEST | input | Input with internal pull-down that starts push-to-test when above approximately VDD - 0.5 V, starts timer mode on a high-to-low transition, and enters diagnostic test/calibration mode when pulled below VSS. |+| 1 | C1 | passive | Sets photoamplifier gain in supervisory mode; C1 should not exceed 0.1 µF so that Ae stays at or below 10,000. |+| 2 | C2 | passive | Sets photoamplifier gain in standby mode; C2 should not exceed 0.1 µF so that Ae stays at or below 10,000, and a resistor must be installed in series with it. |+| 3 | DETECT | input | Photoamplifier input connected to the photodiode cathode, which is operated at zero bias; a shunt resistor must be installed in parallel with the photodiode. |+| 4 | STROBE | power_out | Provides a strobed, regulated voltage of VDD - 5 V (VDD - 5.25 V to VDD - 4.75 V when active) that serves as the minus reference for the photoamplifier circuitry. |+| 5 | VDD | power_in | Positive supply pin, operating from 6 to 12 V with respect to VSS (absolute maximum -0.5 to 15 V referenced to VSS). |+| 6 | IRED | output | Provides a pulsed base current for an external NPN transistor driving the IR emitter, whose beta should be greater than 100, and is not active while the horn and LED outputs are active. |+| 7 | I/O | bidirectional | Interconnect pin for multiple detectors: driven high on local smoke, it must stay high for a minimum of nominally 95 to 137 ms to cause an alarm in connected units, has an on-chip pull-down and must be left unconnected if unused. |+| 8 | HORN1 | output | Drives the piezoelectric horn, connected to the piezo metal support electrode, as the primary output of the horn driver pair. |+| 9 | HORN2 | output | Complementary output driving the piezoelectric horn, connected to the ceramic electrode. |+| 10 | FEEDBACK | input | Input from the piezoelectric horn feedback electrode used with the horn-starting passive components; it must be connected to VSS if not used. |+| 11 | LED | output | Open-drain NMOS output that directly drives a visible LED; if no LED is used it should be replaced with a resistor (typically 500 to 1000 Ω) so battery loading remains about 10 mA. |+| 12 | OSC CAP | passive | Connection for the capacitor between this pin and VDD that, with a parallel resistor, forms the two-terminal oscillator setting the internal clock low time (Tlow = 0.693 × ROSCCAP × COSCCAP). |+| 13 | TIMING RES | passive | Connection for the resistor between this pin and OSC CAP that sets the internal clock high time and IRED pulse width (Thigh = 0.693 × RTIMINGRES × COSCCAP). |+| 14 | VSS | power_in | Negative supply pin, usually ground, to which the voltage levels of the device are referenced. |+| 15 | HUSH | input | Input with internal pull-down that enables timer mode when above 1.5 V and disables it when below 0.5 V, and is the smoke comparator reference during timer mode. |+| 16 | TEST | input | Input with internal pull-down that starts push-to-test mode when above approximately VDD - 0.5 V and, when pulled below VSS, enters diagnostic test/calibration mode. |  ## Key specifications @@ -40,63 +40,66 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply Voltage Range | VDD | -0.5 |  | 15 | V | Referenced to VSS | 2 |-| Input Voltage Range | VIN | -0.3 |  |  | V | Referenced to VSS; upper limit printed as VDD+0.3 V | 2 |-| Input Current | IIN |  |  | 10 | mA |  | 2 |-| Operating Ambient Temperature Range | TA | -25 |  | 75 | ºC |  | 2 |-| Maximum Junction Temperature | TJ(max) |  |  | 150 | ºC |  | 2 |-| Storage Temperature Range | Tstg | -55 |  | 125 | ºC |  | 2 |-| Supply Voltage Range | VDD | 6 |  | 12 | V | Pin 5 | 4 |-| Operating Supply Current, average in standby mode | IDD |  |  | 9 | μA | Average in standby mode, configured per typical application; VDD 12 V; pin 5 | 4 |-| Operating Supply Current, STROBE on, IRED off | IDD |  |  | 2 | mA | During STROBE on, IRED off, configured per typical application; VDD 12 V; pin 5 | 4 |-| Operating Supply Current, STROBE on, IRED on | IDD |  |  | 3 | mA | During STROBE on, IRED on, configured per typical application; VDD 12 V; pin 5 | 4 |-| Low-Level Input Voltage | VIL |  |  | 1.5 | V | Test pin 7; VDD 9 V | 4 |-| Low-Level Input Voltage | VIL |  |  | 2.7 | V | Test pin 10; VDD 9 V | 4 |-| Low-Level Input Voltage | VIL |  |  | 7 | V | Test pin 16; VDD 9 V | 4 |-| Low-Level Input Voltage | VIL |  |  | 0.5 | V | Test pin 15; VDD 9 V | 4 |-| High-Level Input Voltage | VIH | 3.2 |  |  | V | Test pin 7; VDD 9 V | 4 |-| High-Level Input Voltage | VIH | 6.3 |  |  | V | Test pin 10; VDD 9 V | 4 |-| High-Level Input Voltage | VIH | 8.5 |  |  | V | Test pin 16; VDD 9 V | 4 |-| High-Level Input Voltage | VIH | 1.6 |  |  | V | Test pin 15; VDD 9 V | 4 |-| Input Leakage High | IIH |  |  | 100 | nA | VIN = VDD, STROBE active, OSC CAP = VDD; pins 1, 2; VDD 12 V | 4 |-| Input Leakage Low | IIL |  |  | -100 | nA | VIN = VST, STROBE active, OSC CAP = VDD; pins 1, 2, 3; VDD 12 V | 4 |-| Input Leakage Low | IIL |  |  | -1 | μA | VIN = VSS; pins 15, 16; VDD 12 V | 4 |-| Input Pull-Down Current | IIN | 0.25 |  | 10 | μA | VIN = VDD; pins 16, 15; VDD 9 V | 4 |-| Input Pull-Down Current | IIN | 20 |  | 80 | μA | No local smoke, VIN = VDD; pin 7; VDD 9 V | 4 |-| Input Pull-Down Current | IIN |  |  | 140 | μA | No local smoke, VIN = 17 V; pin 7; VDD 12 V | 4 |-| Low-Level Output Voltage | VOL |  |  | 0.6 | V | IO = 10 mA; pin 11; VDD 6.5 V | 4 |-| Low-Level Output Voltage | VOL |  |  | 1 | V | IO = 16 mA; pins 8, 9; VDD 6.5 V | 4 |-| High-Level Output Voltage | VOH | 5.5 |  |  | V | IO = -16 mA; pins 8, 9; VDD 6.5 V | 4 |-| IRED Output Voltage, inactive | VIRED |  |  | 0.1 | V | Inactive, IO = 1 μA, TA = 25°C; pin 6; VDD 12 V | 4 |-| IRED Output Voltage, active | VIRED | 2.85 | 3.1 | 3.35 | V | Active, IO = -6 mA, TA = 25°C; pin 6; VDD 9 V | 4 |-| OFF Leakage Current High | IOZ |  |  | 1 | μA | VO = VDD; pins 11, 13; VDD 12 V | 5 |-| OFF Leakage Current Low | IOZ |  |  | -1 | μA | VO = VSS; pins 11, 13; VDD 12 V | 5 |-| High-Level Output Current | IOH | -4 |  |  | mA | VDD = Alarm, I/O active, VO = VDD, 2 V; pin 7; VDD 9 V | 5 |-| Low-Battery Alarm Threshold | VDD(th) | 6.9 | 7.2 | 7.5 | V | Pin 5 | 5 |-| Oscillator Period | tosc | 9.4 | 10.5 | 11.5 | ms | Pin 12; VDD 9 V | 5 |-| LED Pulse Period | tled1 | 39 |  | 48 | s | No local or remote smoke; pin 11; VDD 9 V | 5 |-| LED Pulse Period | tled3 | 0.45 | 0.5 | 0.55 | s | Local smoke; pin 11; VDD 9 V | 5 |-| LED Pulse Period | tled7 | 9.67 | 10.75 | 11.83 | s | Timer mode, no alarm; pin 11; VDD 9 V | 5 |-| STROBE Pulse Period | tst1 | 9.6 |  | 11.9 | s | No local or remote smoke; pin 4; VDD 9 V | 5 |-| STROBE Pulse Period | tst2 | 1.8 | 2 | 2.2 | s | After 1 of 3 valid samples; pin 4; VDD 9 V | 5 |-| STROBE Pulse Period | tst3 | 0.8 | 1 | 1.1 | s | After 2 of 3 valid samples and during local alarm; pin 4; VDD 9 V | 5 |-| STROBE Pulse Period | tst4 | 7.2 | 8 | 8.9 | s | Remote smoke only; pin 4; VDD 9 V | 5 |-| STROBE Pulse Period | tst5 | 38.9 |  | 47.1 | s | Chamber test or low battery test, no local alarm; pin 4; VDD 9 V | 5 |-| STROBE Pulse Period | tst6 | 225 | 252 | 278 | ms | Pushbutton test, induced alarm; pin 4; VDD 9 V | 5 |-| STROBE Pulse Width | tw(st) | 9.5 |  | 11.5 | ms | Pin 4; VDD 9 V | 5 |-| IRED Pulse Period | tired1 | 9.6 |  | 11.9 | s | No local or remote smoke; pin 6; VDD 9 V | 6 |-| IRED Pulse Period | tired2 | 1.8 | 2 | 2.2 | s | After 1 of 3 valid samples; pin 6; VDD 9 V | 6 |-| IRED Pulse Period | tired3 | 0.8 | 1 | 1.1 | s | After 2 of 3 valid samples and during local alarm; pin 6; VDD 9 V | 6 |-| IRED Pulse Period | tired4 | 7.2 | 8 | 8.9 | s | Remote smoke only; pin 6; VDD 9 V | 6 |-| IRED Pulse Period | tired5 | 38.9 |  | 47.1 | s | Chamber test, no local alarm; pin 6; VDD 9 V | 6 |-| IRED Pulse Period | tired6 | 225 | 252 | 278 | ms | Pushbutton test, induced alarm; pin 6; VDD 9 V | 6 |-| IRED Pulse Width | tw(ired) | 94 |  | 116 | μs | Pin 6; VDD 9 V | 6 |-| I/O Charge Dump Duration | tdump | 0.9 | 1 | 1.1 | s | End of local alarm or test; pin 7; VDD 9 V | 6 |-| Horn Warning Pulse Period | thorn | 38.9 |  | 47.1 | s | Low battery or degraded chamber sensitivity; pins 8, 9; VDD 9 V | 6 |-| Horn On-Time | ton(horn) | 450 | 500 | 550 | ms | Local or remote alarm; pins 8, 9; VDD 9 V | 6 |-| Horn Off-Time | toff1(horn) | 450 | 500 | 550 | ms | Local or remote alarm (see Timing Diagrams section); pins 8, 9; VDD 9 V | 6 |-| Horn Off-Time | toff2(horn) | 1350 | 1500 | 1650 | ms | Local or remote alarm (see Timing Diagrams section); pins 8, 9; VDD 9 V | 6 |-| Package Thermal Resistance, package LW | RθJA |  | 48 |  | ºC/W | Package LW, on 4-layer PCB based on JEDEC standard | 2 |+| Supply voltage range (absolute maximum) | VDD | -0.5 |  | 15 | V | Referenced to VSS | 2 |+| Input voltage range (absolute maximum) | VIN | -0.3 |  |  | V | Referenced to VSS; upper limit printed as VDD+0.3 | 2 |+| Input current (absolute maximum) | IIN |  |  | 10 | mA |  | 2 |+| Operating ambient temperature range (absolute maximum) | TA | -25 |  | 75 | ºC |  | 2 |+| Maximum junction temperature (absolute maximum) | TJ(max) |  |  | 150 | ºC |  | 2 |+| Storage temperature range (absolute maximum) | Tstg | -55 |  | 125 | ºC |  | 2 |+| Supply voltage range | VDD | 6 |  | 12 | V | Operating range as printed in DC electrical characteristics | 4 |+| Package thermal resistance, Package LW (SOICW) | RθJA |  | 48 |  | ºC/W | Package LW, on 4-layer PCB based on JEDEC standard | 2 |+| Operating supply current, average in standby | IDD |  |  | 9 | μA | Average in standby mode, configured per typical application; test pin 5, VDD 12 V | 4 |+| Operating supply current, STROBE on, IRED off | IDD |  |  | 2 | mA | During STROBE on, IRED off, configured per typical application; test pin 5, VDD 12 V | 4 |+| Operating supply current, STROBE on, IRED on | IDD |  |  | 3 | mA | During STROBE on, IRED on, configured per typical application; test pin 5, VDD 12 V | 4 |+| Low-level input voltage, pin 7 | VIL |  |  | 1.5 | V | Test pin 7, VDD 9 V | 4 |+| Low-level input voltage, pin 10 | VIL |  |  | 2.7 | V | Test pin 10, VDD 9 V | 4 |+| Low-level input voltage, pin 16 | VIL |  |  | 7 | V | Test pin 16, VDD 9 V | 4 |+| Low-level input voltage, pin 15 | VIL |  |  | 0.5 | V | Test pin 15, VDD 9 V | 4 |+| High-level input voltage, pin 7 | VIH | 3.2 |  |  | V | Test pin 7, VDD 9 V | 4 |+| High-level input voltage, pin 10 | VIH | 6.3 |  |  | V | Test pin 10, VDD 9 V | 4 |+| High-level input voltage, pin 16 | VIH | 8.5 |  |  | V | Test pin 16, VDD 9 V | 4 |+| High-level input voltage, pin 15 | VIH | 1.6 |  |  | V | Test pin 15, VDD 9 V | 4 |+| Input leakage high, pins 1 and 2 | IIH |  |  | 100 | nA | VIN = VDD, STROBE active, OSC CAP = VDD; test pins 1, 2; VDD 12 V | 4 |+| Input leakage high, pins 3, 10, 12 | IIH |  |  | 100 | nA | VIN = VDD; test pins 3, 10, 12; VDD 12 V | 4 |+| Input leakage low, pins 1, 2, 3 | IIL |  |  | -100 | nA | VIN = VST, STROBE active, OSC CAP = VDD; test pins 1, 2, 3; VDD 12 V | 4 |+| Input leakage low, pins 10, 12 | IIL |  |  | -100 | nA | VIN = VSS; test pins 10, 12; VDD 12 V | 4 |+| Input leakage low, pins 15, 16 | IIL |  |  | -1 | μA | Test pins 15, 16; VDD 12 V | 4 |+| Input pull-down current, pins 16 and 15 | IIN | 0.25 |  | 10 | μA | VIN = VDD; test pins 16, 15; VDD 9 V | 4 |+| Input pull-down current, pin 7 | IIN | 20 |  | 80 | μA | No local smoke, VIN = VDD; test pin 7; VDD 9 V | 4 |+| Input pull-down current, pin 7 at 17 V | IIN |  |  | 140 | μA | No local smoke, VIN = 17 V; test pin 7; VDD 12 V | 4 |+| Low-level output voltage, pin 11 | VOL |  |  | 0.6 | V | IO = 10 mA; test pin 11; VDD 6.5 V | 4 |+| Low-level output voltage, pins 8 and 9 | VOL |  |  | 1 | V | IO = 16 mA; test pins 8, 9; VDD 6.5 V | 4 |+| High-level output voltage, pins 8 and 9 | VOH | 5.5 |  |  | V | IO = -16 mA; test pins 8, 9; VDD 6.5 V | 4 |+| High-level output current, pin 7 | IOH | -4 |  |  | mA | VDD = Alarm, I/O active, VO = VDD, 2 V; test pin 7; VDD 9 V | 5 |+| OFF leakage current high, pins 11 and 13 | IOZ |  |  | 1 | μA | VO = VDD; test pins 11, 13; VDD 12 V | 5 |+| OFF leakage current low, pins 11 and 13 | IOZ |  |  | -1 | μA | VO = VSS; test pins 11, 13; VDD 12 V | 5 |+| IRED output voltage, inactive | VIRED |  |  | 0.1 | V | Inactive, IO = 1 μA, TA = 25°C; test pin 6; VDD 12 V | 4 |+| IRED output voltage, active | VIRED | 2.85 | 3.1 | 3.35 | V | Active, IO = -6 mA, TA = 25°C; test pin 6; VDD 9 V | 4 |+| Low-battery alarm threshold | VDD(th) | 6.9 | 7.2 | 7.5 | V | Test pin 5 | 5 |+| Oscillator period | tosc | 9.4 | 10.5 | 11.5 | ms | Test pin 12; VDD 9 V | 5 |+| LED pulse period, no local or remote smoke | tled1 | 39 |  | 48 | s | No local or remote smoke; test pin 11; VDD 9 V | 5 |+| LED pulse period, local smoke | tled3 | 0.45 | 0.5 | 0.55 | s | Local smoke; test pin 11; VDD 9 V | 5 |+| LED pulse period, pushbutton test, induced alarm | tled6 | 0.45 | 0.5 | 0.55 | s | Pushbutton test, induced alarm; test pin 11; VDD 9 V | 5 |+| LED pulse period, timer mode, no alarm | tled7 | 9.67 | 10.75 | 11.83 | s | Timer mode, no alarm; test pin 11; VDD 9 V | 5 |+| LED pulse width | tw(led) | 9.5 |  | 11.5 | ms | Test pin 11; VDD 9 V | 5 |+| STROBE pulse period, no local or remote smoke | tst1 | 9.6 |  | 11.9 | s | No local or remote smoke; test pin 4; VDD 9 V | 5 |+| STROBE pulse period, after 1 of 3 valid samples | tst2 | 1.8 | 2 | 2.2 | s | After 1 of 3 valid samples; test pin 4; VDD 9 V | 5 |+| STROBE pulse period, after 2 of 3 valid samples and during local alarm | tst3 | 0.8 | 1 | 1.1 | s | After 2 of 3 valid samples and during local alarm; test pin 4; VDD 9 V | 5 |+| STROBE pulse period, remote smoke only | tst4 | 7.2 | 8 | 8.9 | s | Remote smoke only; test pin 4; VDD 9 V | 5 |+| STROBE pulse period, chamber test or low battery test, no local alarm | tst5 | 38.9 |  | 47.1 | s | Chamber test or low battery test, no local alarm; test pin 4; VDD 9 V | 5 |+| STROBE pulse period, pushbutton test, induced alarm | tst6 | 225 | 252 | 278 | ms | Pushbutton test, induced alarm; test pin 4; VDD 9 V | 5 |+| STROBE pulse width | tw(st) | 9.5 |  | 11.5 | ms | Test pin 4; VDD 9 V | 5 |+| IRED pulse period, no local or remote smoke | tired1 | 9.6 |  | 11.9 | s | No local or remote smoke; test pin 6; VDD 9 V | 6 |+| IRED pulse period, after 1 of 3 valid samples | tired2 | 1.8 | 2 | 2.2 | s | After 1 of 3 valid samples; test pin 6; VDD 9 V | 6 |+| IRED pulse period, after 2 of 3 valid samples and during local alarm | tired3 | 0.8 | 1 | 1.1 | s | After 2 of 3 valid samples and during local alarm; test pin 6; VDD 9 V | 6 |+| IRED pulse period, remote smoke only | tired4 | 7.2 | 8 | 8.9 | s | Remote smoke only; test pin 6; VDD 9 V | 6 |+| IRED pulse period, chamber test, no local alarm | tired5 | 38.9 |  | 47.1 | s | Chamber test, no local alarm; test pin 6; VDD 9 V | 6 |+| IRED pulse period, pushbutton test, induced alarm | tired6 | 225 | 252 | 278 | ms | Pushbutton test, induced alarm; test pin 6; VDD 9 V | 6 |+| IRED pulse width | tw(ired) | 94 |  | 116 | μs | Test pin 6; VDD 9 V | 6 |+| IRED rise time | tr(ired) |  |  | 30 | μs | 10% to 90%; test pin 6 | 6 |+| IRED fall time | tf(ired) |  |  | 200 | μs | 90% to 10%; test pin 6 | 6 |+| I/O charge dump duration | tdump | 0.9 | 1 | 1.1 | s | End of local alarm or test; test pin 7; VDD 9 V | 6 |+| Horn warning pulse period | thorn | 38.9 |  | 47.1 | s | Low battery or degraded chamber sensitivity; test pins 8, 9; VDD 9 V | 6 |  ## Materials and finish @@ -117,7 +120,7 @@ As the datasheet states them (page.json `metadata.appearance`; the 3D model's co  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Allegro MicroSystems, LLC datasheet](docs/a5366clwtr-t-datasheet.pdf) (13 pp, sha256 `a14bc986d595aa2d`, retrieved 2026-11-12, tier: lcsc)+- **Datasheet:** [Allegro MicroSystems, LLC datasheet](docs/a5366clwtr-t-datasheet.pdf) (13 pp, sha256 `a14bc986d595aa2d`, retrieved 2026-11-13, tier: lcsc) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+26−28
@@ -1,6 +1,6 @@ {   "slug": "a5366clwtr-t",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "Allegro MicroSystems, LLC Interface - Specialized, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "a5366clwtr-t-hero.glb",-    "a5366clwtr-t-hero.overlay.json",-    "a5366clwtr-t-etched.glb"+    "a5366clwtr-t-hero.overlay.json"   ],   "component": {     "mpn": "A5366CLWTR-T",@@ -43,7 +42,7 @@       "symbol": "a5366clwtr-t.kicad_sym",       "footprint": "a5366clwtr-t.kicad_mod",       "model_3d": "a5366clwtr-t-hero.glb",-      "model_3d_plain": "a5366clwtr-t-etched.glb",+      "model_3d_plain": "a5366clwtr-t.glb",       "model_3d_step": "a5366clwtr-t-etched.step",       "model_3d_step_plain": "a5366clwtr-t.step",       "lbr": "a5366clwtr-t.lbr"@@ -54,7 +53,7 @@       "mouser": "250-A5366CLWTR-T"     },     "distributor_check": {-      "checked_at": "2026-11-12T08:00:24Z",+      "checked_at": "2026-11-13T01:15:40Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "A5366CLWTR-T-ND",@@ -70,97 +69,97 @@         "number": "1",         "name": "C1",         "type": "passive",-        "description": "Capacitor sets photoamplifier gain in supervisory mode, with Ae = 1 + (C1/10) with C1 in pF, and C1 should not exceed 0.1 µF."+        "description": "Sets photoamplifier gain in supervisory mode; C1 should not exceed 0.1 µF so that Ae stays at or below 10,000."       },       {         "number": "2",         "name": "C2",         "type": "passive",-        "description": "Capacitor sets photoamplifier gain in standby mode, with Ae = 1 + (C2/10) with C2 in pF, C2 should not exceed 0.1 µF, and a resistor must be installed in series with it."+        "description": "Sets photoamplifier gain in standby mode; C2 should not exceed 0.1 µF so that Ae stays at or below 10,000, and a resistor must be installed in series with it."       },       {         "number": "3",         "name": "DETECT",         "type": "input",-        "description": "Photoamplifier input connected to the photodiode cathode, which is operated at zero bias and requires a shunt resistor in parallel."+        "description": "Photoamplifier input connected to the photodiode cathode, which is operated at zero bias; a shunt resistor must be installed in parallel with the photodiode."       },       {         "number": "4",         "name": "STROBE",         "type": "power_out",-        "description": "Strobed, regulated output of VDD - 5 V that serves as the low-side reference for the photoamplifier circuitry."+        "description": "Provides a strobed, regulated voltage of VDD - 5 V (VDD - 5.25 V to VDD - 4.75 V when active) that serves as the minus reference for the photoamplifier circuitry."       },       {         "number": "5",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply pin that can range from 6 to 12 V with respect to VSS."+        "description": "Positive supply pin, operating from 6 to 12 V with respect to VSS (absolute maximum -0.5 to 15 V referenced to VSS)."       },       {         "number": "6",         "name": "IRED",         "type": "output",-        "description": "Pulsed base-current output for the external NPN transistor driving the IR emitter, whose beta should be greater than 100."+        "description": "Provides a pulsed base current for an external NPN transistor driving the IR emitter, whose beta should be greater than 100, and is not active while the horn and LED outputs are active."       },       {         "number": "7",         "name": "I/O",         "type": "bidirectional",-        "description": "Interconnect pin that is driven high on local smoke and sampled every fourth clock cycle, requiring three consecutive high samples plus one additional cycle to alarm; it has an on-chip pull-down and must be left unconnected if unused."+        "description": "Interconnect pin for multiple detectors: driven high on local smoke, it must stay high for a minimum of nominally 95 to 137 ms to cause an alarm in connected units, has an on-chip pull-down and must be left unconnected if unused."       },       {         "number": "8",         "name": "HORN1",         "type": "output",-        "description": "Horn driver output connected to the piezoelectric transducer's metal support electrode."+        "description": "Drives the piezoelectric horn, connected to the piezo metal support electrode, as the primary output of the horn driver pair."       },       {         "number": "9",         "name": "HORN2",         "type": "output",-        "description": "Complementary horn driver output connected to the piezoelectric transducer's ceramic electrode."+        "description": "Complementary output driving the piezoelectric horn, connected to the ceramic electrode."       },       {         "number": "10",         "name": "FEEDBACK",         "type": "input",-        "description": "Input connected to the piezoelectric feedback electrode, which must be connected to VSS if not used."+        "description": "Input from the piezoelectric horn feedback electrode used with the horn-starting passive components; it must be connected to VSS if not used."       },       {         "number": "11",         "name": "LED",         "type": "output",-        "description": "Open-drain NMOS output that directly drives a visible LED; if no LED is used it should be replaced by an equivalent resistor (typically 500 to 1000 Ω) so battery loading stays about 10 mA."+        "description": "Open-drain NMOS output that directly drives a visible LED; if no LED is used it should be replaced with a resistor (typically 500 to 1000 Ω) so battery loading remains about 10 mA."       },       {         "number": "12",         "name": "OSC CAP",         "type": "passive",-        "description": "Capacitor connection to VDD that, with a parallel resistor, sets the internal clock low time according to Tlow = 0.693 × ROSCCAP × COSCCAP."+        "description": "Connection for the capacitor between this pin and VDD that, with a parallel resistor, forms the two-terminal oscillator setting the internal clock low time (Tlow = 0.693 × ROSCCAP × COSCCAP)."       },       {         "number": "13",         "name": "TIMING RES",         "type": "passive",-        "description": "Resistor connection to OSC CAP that sets the internal clock high time, which is also the IRED pulse width, according to Thigh = 0.693 × RTIMINGRES × COSCCAP."+        "description": "Connection for the resistor between this pin and OSC CAP that sets the internal clock high time and IRED pulse width (Thigh = 0.693 × RTIMINGRES × COSCCAP)."       },       {         "number": "14",         "name": "VSS",         "type": "power_in",-        "description": "Negative supply pin, connected to the negative supply potential (usually ground)."+        "description": "Negative supply pin, usually ground, to which the voltage levels of the device are referenced."       },       {         "number": "15",         "name": "HUSH",         "type": "input",-        "description": "Input with internal pull-down that enables timer mode when above 1.5 V and disables it when below 0.5 V, and also sets the smoke comparator reference during timer mode."+        "description": "Input with internal pull-down that enables timer mode when above 1.5 V and disables it when below 0.5 V, and is the smoke comparator reference during timer mode."       },       {         "number": "16",         "name": "TEST",         "type": "input",-        "description": "Input with internal pull-down that starts push-to-test when above approximately VDD - 0.5 V, starts timer mode on a high-to-low transition, and enters diagnostic test/calibration mode when pulled below VSS."+        "description": "Input with internal pull-down that starts push-to-test mode when above approximately VDD - 0.5 V and, when pulled below VSS, enters diagnostic test/calibration mode."       }     ],     "provenance": {@@ -174,12 +173,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin numbers and names were taken from the 'Terminal List Table' on page 2 for the Package LW (16-pin; The datasheet does not state a KiCad ERC class for each pin. Types for C1, C2, OSC CAP and TIMING RE; Pin descriptions were condensed to one sentence each from the Pin and Circuit Description section (p",-          "3/16 pins cited to the wrong page (name found elsewhere): ['14:VSS@p8', '15:HUSH@p8', '16:TEST@p8']"+          "extractor flagged: The pin-out diagram labels in the text extraction are not in pin-number order, so pin numbers and na; Pin types for C1, C2, OSC CAP and TIMING RES are assigned as passive, and STROBE as power_out, becau; Descriptions are condensed from the pin and circuit description sections (pages 7-8) into one senten"         ],         "pages_sent": 13,-        "cost_usd": 0.0763,-        "at": "2026-11-12T07:59:54"+        "cost_usd": 0.0791,+        "at": "2026-11-13T01:15:21"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/1fb5fc0f8cc2d6e133de8e134e92d397.pdf",@@ -216,7 +214,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -234,8 +232,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "eed552f7317fd69ef5971958229151d81382645d65c19b10494717e4e6fad34c",-        "checked": "2026-11-12",+        "sha256": "27f9487edd59eb9eadea5a0cb7e0965a350711182be8666b5f99395b1abfc15e",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+29−29
@@ -4,7 +4,7 @@   "slug": "a5366clwtr-t",   "title": "A5366CLWTR-T",   "brief": "Allegro MicroSystems, LLC Interface - Specialized, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "a5366clwtr-t.kicad_sym",       "footprint": "a5366clwtr-t.kicad_mod",       "model_3d": "a5366clwtr-t-hero.glb",-      "model_3d_plain": "a5366clwtr-t-etched.glb",+      "model_3d_plain": "a5366clwtr-t.glb",       "model_3d_step": "a5366clwtr-t-etched.step",       "model_3d_step_plain": "a5366clwtr-t.step",       "lbr": "a5366clwtr-t.lbr"@@ -36,7 +36,7 @@       "mouser": "250-A5366CLWTR-T"     },     "distributor_check": {-      "checked_at": "2026-11-12T08:00:24Z",+      "checked_at": "2026-11-13T01:15:40Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "A5366CLWTR-T-ND",@@ -52,97 +52,97 @@         "number": "1",         "name": "C1",         "type": "passive",-        "description": "Capacitor sets photoamplifier gain in supervisory mode, with Ae = 1 + (C1/10) with C1 in pF, and C1 should not exceed 0.1 µF."+        "description": "Sets photoamplifier gain in supervisory mode; C1 should not exceed 0.1 µF so that Ae stays at or below 10,000."       },       {         "number": "2",         "name": "C2",         "type": "passive",-        "description": "Capacitor sets photoamplifier gain in standby mode, with Ae = 1 + (C2/10) with C2 in pF, C2 should not exceed 0.1 µF, and a resistor must be installed in series with it."+        "description": "Sets photoamplifier gain in standby mode; C2 should not exceed 0.1 µF so that Ae stays at or below 10,000, and a resistor must be installed in series with it."       },       {         "number": "3",         "name": "DETECT",         "type": "input",-        "description": "Photoamplifier input connected to the photodiode cathode, which is operated at zero bias and requires a shunt resistor in parallel."+        "description": "Photoamplifier input connected to the photodiode cathode, which is operated at zero bias; a shunt resistor must be installed in parallel with the photodiode."       },       {         "number": "4",         "name": "STROBE",         "type": "power_out",-        "description": "Strobed, regulated output of VDD - 5 V that serves as the low-side reference for the photoamplifier circuitry."+        "description": "Provides a strobed, regulated voltage of VDD - 5 V (VDD - 5.25 V to VDD - 4.75 V when active) that serves as the minus reference for the photoamplifier circuitry."       },       {         "number": "5",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply pin that can range from 6 to 12 V with respect to VSS."+        "description": "Positive supply pin, operating from 6 to 12 V with respect to VSS (absolute maximum -0.5 to 15 V referenced to VSS)."       },       {         "number": "6",         "name": "IRED",         "type": "output",-        "description": "Pulsed base-current output for the external NPN transistor driving the IR emitter, whose beta should be greater than 100."+        "description": "Provides a pulsed base current for an external NPN transistor driving the IR emitter, whose beta should be greater than 100, and is not active while the horn and LED outputs are active."       },       {         "number": "7",         "name": "I/O",         "type": "bidirectional",-        "description": "Interconnect pin that is driven high on local smoke and sampled every fourth clock cycle, requiring three consecutive high samples plus one additional cycle to alarm; it has an on-chip pull-down and must be left unconnected if unused."+        "description": "Interconnect pin for multiple detectors: driven high on local smoke, it must stay high for a minimum of nominally 95 to 137 ms to cause an alarm in connected units, has an on-chip pull-down and must be left unconnected if unused."       },       {         "number": "8",         "name": "HORN1",         "type": "output",-        "description": "Horn driver output connected to the piezoelectric transducer's metal support electrode."+        "description": "Drives the piezoelectric horn, connected to the piezo metal support electrode, as the primary output of the horn driver pair."       },       {         "number": "9",         "name": "HORN2",         "type": "output",-        "description": "Complementary horn driver output connected to the piezoelectric transducer's ceramic electrode."+        "description": "Complementary output driving the piezoelectric horn, connected to the ceramic electrode."       },       {         "number": "10",         "name": "FEEDBACK",         "type": "input",-        "description": "Input connected to the piezoelectric feedback electrode, which must be connected to VSS if not used."+        "description": "Input from the piezoelectric horn feedback electrode used with the horn-starting passive components; it must be connected to VSS if not used."       },       {         "number": "11",         "name": "LED",         "type": "output",-        "description": "Open-drain NMOS output that directly drives a visible LED; if no LED is used it should be replaced by an equivalent resistor (typically 500 to 1000 Ω) so battery loading stays about 10 mA."+        "description": "Open-drain NMOS output that directly drives a visible LED; if no LED is used it should be replaced with a resistor (typically 500 to 1000 Ω) so battery loading remains about 10 mA."       },       {         "number": "12",         "name": "OSC CAP",         "type": "passive",-        "description": "Capacitor connection to VDD that, with a parallel resistor, sets the internal clock low time according to Tlow = 0.693 × ROSCCAP × COSCCAP."+        "description": "Connection for the capacitor between this pin and VDD that, with a parallel resistor, forms the two-terminal oscillator setting the internal clock low time (Tlow = 0.693 × ROSCCAP × COSCCAP)."       },       {         "number": "13",         "name": "TIMING RES",         "type": "passive",-        "description": "Resistor connection to OSC CAP that sets the internal clock high time, which is also the IRED pulse width, according to Thigh = 0.693 × RTIMINGRES × COSCCAP."+        "description": "Connection for the resistor between this pin and OSC CAP that sets the internal clock high time and IRED pulse width (Thigh = 0.693 × RTIMINGRES × COSCCAP)."       },       {         "number": "14",         "name": "VSS",         "type": "power_in",-        "description": "Negative supply pin, connected to the negative supply potential (usually ground)."+        "description": "Negative supply pin, usually ground, to which the voltage levels of the device are referenced."       },       {         "number": "15",         "name": "HUSH",         "type": "input",-        "description": "Input with internal pull-down that enables timer mode when above 1.5 V and disables it when below 0.5 V, and also sets the smoke comparator reference during timer mode."+        "description": "Input with internal pull-down that enables timer mode when above 1.5 V and disables it when below 0.5 V, and is the smoke comparator reference during timer mode."       },       {         "number": "16",         "name": "TEST",         "type": "input",-        "description": "Input with internal pull-down that starts push-to-test when above approximately VDD - 0.5 V, starts timer mode on a high-to-low transition, and enters diagnostic test/calibration mode when pulled below VSS."+        "description": "Input with internal pull-down that starts push-to-test mode when above approximately VDD - 0.5 V and, when pulled below VSS, enters diagnostic test/calibration mode."       }     ],     "provenance": {@@ -156,12 +156,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin numbers and names were taken from the 'Terminal List Table' on page 2 for the Package LW (16-pin; The datasheet does not state a KiCad ERC class for each pin. Types for C1, C2, OSC CAP and TIMING RE; Pin descriptions were condensed to one sentence each from the Pin and Circuit Description section (p",-          "3/16 pins cited to the wrong page (name found elsewhere): ['14:VSS@p8', '15:HUSH@p8', '16:TEST@p8']"+          "extractor flagged: The pin-out diagram labels in the text extraction are not in pin-number order, so pin numbers and na; Pin types for C1, C2, OSC CAP and TIMING RES are assigned as passive, and STROBE as power_out, becau; Descriptions are condensed from the pin and circuit description sections (pages 7-8) into one senten"         ],         "pages_sent": 13,-        "cost_usd": 0.0763,-        "at": "2026-11-12T07:59:54"+        "cost_usd": 0.0791,+        "at": "2026-11-13T01:15:21"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/1fb5fc0f8cc2d6e133de8e134e92d397.pdf",@@ -198,7 +197,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -216,8 +215,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "eed552f7317fd69ef5971958229151d81382645d65c19b10494717e4e6fad34c",-        "checked": "2026-11-12",+        "sha256": "27f9487edd59eb9eadea5a0cb7e0965a350711182be8666b5f99395b1abfc15e",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -1013,10 +1012,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "a5366clwtr-t-hero.glb",-    "a5366clwtr-t-hero.overlay.json",-    "a5366clwtr-t-etched.glb"+    "a5366clwtr-t-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Allegro MicroSystems, LLC Interface - Specialized, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file