A3941KLPTR-T

@@ -53,7 +53,7 @@         "number": "1",         "name": "VDRAIN",         "type": "input",-        "description": "Low-current sense input (\u2264250 \u00b5A) from high-side FET drain for measuring bridge voltage at the positive supply connection point."+        "description": "Low-current sense input (≤250 µA) from high-side FET drain for measuring bridge voltage at the positive supply connection point."       },       {         "number": "2",@@ -65,7 +65,7 @@         "number": "3",         "name": "GLB",         "type": "output",-        "description": "Low-side gate drive output for phase B MOSFET with 60-150 ns propagation delay and 3-4 \u03a9 pulldown on-resistance."+        "description": "Low-side gate drive output for phase B MOSFET with 60-150 ns propagation delay and 3-4 Ω pulldown on-resistance."       },       {         "number": "4",@@ -119,7 +119,7 @@         "number": "12",         "name": "GLA",         "type": "output",-        "description": "Low-side gate drive output for phase A MOSFET with 60-150 ns propagation delay and 3-4 \u03a9 pulldown on-resistance."+        "description": "Low-side gate drive output for phase A MOSFET with 60-150 ns propagation delay and 3-4 Ω pulldown on-resistance."       },       {         "number": "13",@@ -191,25 +191,25 @@         "number": "24",         "name": "RESET",         "type": "input",-        "description": "Active-low reset input (0-5.5 V logic, 200 mV hysteresis, 50 k\u03a9 internal pulldown) enabling sleep mode and clearing latched faults."+        "description": "Active-low reset input (0-5.5 V logic, 200 mV hysteresis, 50 kΩ internal pulldown) enabling sleep mode and clearing latched faults."       },       {         "number": "25",         "name": "FF1",         "type": "tri_state",-        "description": "Open-drain fault flag output (<0.4 V when fault present, <1 \u00b5A leakage current) indicating overtemperature or combined fault conditions."+        "description": "Open-drain fault flag output (<0.4 V when fault present, <1 µA leakage current) indicating overtemperature or combined fault conditions."       },       {         "number": "26",         "name": "FF2",         "type": "tri_state",-        "description": "Open-drain fault flag output (<0.4 V when fault present, <1 \u00b5A leakage current) indicating short-circuit, undervoltage, or combined faults."+        "description": "Open-drain fault flag output (<0.4 V when fault present, <1 µA leakage current) indicating short-circuit, undervoltage, or combined faults."       },       {         "number": "27",         "name": "RDEAD",         "type": "input",-        "description": "Dead-time setting input (resistor 3 k\u03a9 to 240 k\u03a9 or V5 connection) controlling cross-conduction prevention delay from 180 ns to 6 \u00b5s."+        "description": "Dead-time setting input (resistor 3 kΩ to 240 kΩ or V5 connection) controlling cross-conduction prevention delay from 180 ns to 6 µs."       },       {         "number": "28",@@ -260,6 +260,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "a3941klptr-t.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.2,+          9.7,+          1.05+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "ff242f1d3be9d09e7f929707a2c5b1ee974a4f882053b04bcdb1cd2cb21223ef",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "a3941klptr-t-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.2,+          9.7,+          1.05+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "538253b54f89125487d2e58d9d1335faa2e152076bb359be8ccc38f2e9cffe46",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}