← Commit history

Initial commit: component/a3906sestr-t

Ray ·9c73b8c22c ·
2 files changed +279
README.mdadded+57
@@ -0,0 +1,57 @@+# A3906SESTR-T++**Allegro MicroSystems LLC** · Stepper Motor Driver · QFN-20-EP(4x4)++A3906SESTR-T from Allegro MicroSystems LLC, in a QFN-20-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CP2 | passive | Charge pump capacitor terminal 2; connect 0.1 μF ceramic capacitor between CP1 and CP2. |+| 2 | GND | power_in | Ground; low impedance connection to PCB ground plane. |+| 3 | SLEEP | input | Sleep logic input (active low); logic low disables output drivers and internal circuitry. |+| 4 | IN1 | input | Control input for bridge 1; accepts logic signals in range 0 to 5.5 V. |+| 5 | IN2 | input | Control input for bridge 1; accepts logic signals in range 0 to 5.5 V. |+| 6 | IN3 | input | Control input for bridge 2; accepts logic signals in range 0 to 5.5 V. |+| 7 | IN4 | input | Control input for bridge 2; accepts logic signals in range 0 to 5.5 V. |+| 8 | FL1 | tri_state | Current limit flag output for bridge 1; pulled low when peak current in motor winding reaches threshold determined by sense resistor. |+| 9 | FL2 | tri_state | Current limit flag output for bridge 2; pulled low when peak current in motor winding reaches threshold determined by sense resistor. |+| 10 | OUT2A | output | DMOS full-bridge 2 output A; source or sink output current up to 1 A continuous. |+| 11 | SENSE2 | input | Current sense input for bridge 2; analog voltage input maximum 0.5 V continuous or 1 V pulsed. |+| 12 | OUT2B | output | DMOS full-bridge 2 output B; source or sink output current up to 1 A continuous. |+| 13 | VBB | power_in | Supply voltage input; operating range 2.5 to 9 V for motor drive supply. |+| 14 | OUT1B | output | DMOS full-bridge 1 output B; source or sink output current up to 1 A continuous. |+| 15 | SENSE1 | input | Current sense input for bridge 1; analog voltage input maximum 0.5 V continuous or 1 V pulsed. |+| 16 | OUT1A | output | DMOS full-bridge 1 output A; source or sink output current up to 1 A continuous. |+| 17 | VCP | passive | Reservoir capacitor terminal; connect 0.1 μF ceramic capacitor between VCP and VBB for high-side gate drive supply. |+| 18 | CP3 | passive | Charge pump capacitor terminal 3; connect 0.1 μF ceramic capacitor between CP3 and CP4. |+| 19 | CP1 | passive | Charge pump capacitor terminal 1; connect 0.1 μF ceramic capacitor between CP1 and CP2. |+| 20 | CP4 | passive | Charge pump capacitor terminal 4; connect 0.1 μF ceramic capacitor between CP3 and CP4. |+| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Allegro MicroSystems LLC |+| Package | QFN-20-EP(4x4) |+| Category | Motor Driver ICs |+| Pins | 21 |++## CAD (KiCad official)++- Symbol: `A3906SESTR-T`+- Footprint: `Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm`+- 3D model: QFN-20-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `a3906sestr-t-etched.step` / `a3906sestr-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `a3906sestr-t.step` / `a3906sestr-t.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Allegro MicroSystems LLC datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586181550601867264) (10 pp, sha256 `7937a27a62d2477e`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/a3906sestr-t-datasheet.pdf)
page.jsonadded+222
@@ -0,0 +1,222 @@+{+  "slug": "a3906sestr-t",+  "version": "0.1.0",+  "type": "component",+  "description": "Allegro MicroSystems LLC Stepper Motor Driver, QFN-20-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "motor driver ics",+    "a3906sestr-t",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "a3906sestr-t.kicad_sym",+    "a3906sestr-t.kicad_mod",+    "a3906sestr-t.glb",+    "a3906sestr-t.step",+    "a3906sestr-t.lbr",+    "docs/hero.png",+    "docs/a3906sestr-t-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "A3906SESTR-T",+    "manufacturer": "Allegro MicroSystems LLC",+    "package": "QFN-20-EP(4x4)",+    "pin_count": 21,+    "category": "Motor Driver ICs",+    "subcategory": "Stepper Motor Driver",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586181550601867264",+    "parts": {+      "symbol": "a3906sestr-t.kicad_sym",+      "footprint": "a3906sestr-t.kicad_mod",+      "model_3d": "a3906sestr-t-etched.glb",+      "model_3d_plain": "a3906sestr-t.glb",+      "model_3d_step": "a3906sestr-t-etched.step",+      "model_3d_step_plain": "a3906sestr-t.step",+      "lbr": "a3906sestr-t.lbr"+    },+    "distributor_links": {+      "lcsc": "C86274"+    },+    "pins": [+      {+        "number": "1",+        "name": "CP2",+        "type": "passive",+        "description": "Charge pump capacitor terminal 2; connect 0.1 μF ceramic capacitor between CP1 and CP2."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground; low impedance connection to PCB ground plane."+      },+      {+        "number": "3",+        "name": "SLEEP",+        "type": "input",+        "description": "Sleep logic input (active low); logic low disables output drivers and internal circuitry."+      },+      {+        "number": "4",+        "name": "IN1",+        "type": "input",+        "description": "Control input for bridge 1; accepts logic signals in range 0 to 5.5 V."+      },+      {+        "number": "5",+        "name": "IN2",+        "type": "input",+        "description": "Control input for bridge 1; accepts logic signals in range 0 to 5.5 V."+      },+      {+        "number": "6",+        "name": "IN3",+        "type": "input",+        "description": "Control input for bridge 2; accepts logic signals in range 0 to 5.5 V."+      },+      {+        "number": "7",+        "name": "IN4",+        "type": "input",+        "description": "Control input for bridge 2; accepts logic signals in range 0 to 5.5 V."+      },+      {+        "number": "8",+        "name": "FL1",+        "type": "tri_state",+        "description": "Current limit flag output for bridge 1; pulled low when peak current in motor winding reaches threshold determined by sense resistor."+      },+      {+        "number": "9",+        "name": "FL2",+        "type": "tri_state",+        "description": "Current limit flag output for bridge 2; pulled low when peak current in motor winding reaches threshold determined by sense resistor."+      },+      {+        "number": "10",+        "name": "OUT2A",+        "type": "output",+        "description": "DMOS full-bridge 2 output A; source or sink output current up to 1 A continuous."+      },+      {+        "number": "11",+        "name": "SENSE2",+        "type": "input",+        "description": "Current sense input for bridge 2; analog voltage input maximum 0.5 V continuous or 1 V pulsed."+      },+      {+        "number": "12",+        "name": "OUT2B",+        "type": "output",+        "description": "DMOS full-bridge 2 output B; source or sink output current up to 1 A continuous."+      },+      {+        "number": "13",+        "name": "VBB",+        "type": "power_in",+        "description": "Supply voltage input; operating range 2.5 to 9 V for motor drive supply."+      },+      {+        "number": "14",+        "name": "OUT1B",+        "type": "output",+        "description": "DMOS full-bridge 1 output B; source or sink output current up to 1 A continuous."+      },+      {+        "number": "15",+        "name": "SENSE1",+        "type": "input",+        "description": "Current sense input for bridge 1; analog voltage input maximum 0.5 V continuous or 1 V pulsed."+      },+      {+        "number": "16",+        "name": "OUT1A",+        "type": "output",+        "description": "DMOS full-bridge 1 output A; source or sink output current up to 1 A continuous."+      },+      {+        "number": "17",+        "name": "VCP",+        "type": "passive",+        "description": "Reservoir capacitor terminal; connect 0.1 μF ceramic capacitor between VCP and VBB for high-side gate drive supply."+      },+      {+        "number": "18",+        "name": "CP3",+        "type": "passive",+        "description": "Charge pump capacitor terminal 3; connect 0.1 μF ceramic capacitor between CP3 and CP4."+      },+      {+        "number": "19",+        "name": "CP1",+        "type": "passive",+        "description": "Charge pump capacitor terminal 1; connect 0.1 μF ceramic capacitor between CP1 and CP2."+      },+      {+        "number": "20",+        "name": "CP4",+        "type": "passive",+        "description": "Charge pump capacitor terminal 4; connect 0.1 μF ceramic capacitor between CP3 and CP4."+      },+      {+        "number": "21",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 21 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 10,+        "cost_usd": 0.3156,+        "at": "2026-09-22T03:51:01"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586181550601867264",+        "pages": 10,+        "sha256": "7937a27a62d2477e",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 21,+        "described": 21,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file