← Commit history
README.md+39−8
@@ -2,15 +2,15 @@  **Allegro MicroSystems LLC** · Hall Sensor · SOT-23W -A3212ELHLT-T from Allegro MicroSystems LLC, in a SOT-23W. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+A3212ELHLT-T from Allegro MicroSystems LLC, in a SOT-23W. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VCC | power_in | Supply voltage input. Operating range 2.5 V to 3.5 V (absolute max 4.0 V). Bypass with a ceramic capacitor to GND close to the pin. |-| 2 | GND | power_in | Ground reference for the device. |-| 3 | OUTPUT | output | Open-drain Hall-switch output. Pulled low when the magnetic flux density exceeds the operate point (BOP); high-impedance (requires external pull-up) when below the release point (BRP). |+| 1 | VDD | power_in | Supply pin for the Hall-effect switch; the datasheet gives an operating supply range of 2.5 V to 3.5 V (2.75 V typical) and an absolute maximum of 5 V. |+| 2 | GROUND | power_in | Ground reference for the device; an external bypass capacitor should be connected close to the Hall element between supply and ground to reduce external and chopper-stabilization noise. |+| 3 | OUTPUT | output | Latched digital output from a MOSFET that sinks up to 1 mA when on, with VOUT(ON) of 100 mV typical and 300 mV maximum at 1 mA and VDD = 2.75 V; the off-state output voltage is rated to a maximum of 5 V. |  ## Key specifications @@ -21,9 +21,40 @@ A3212ELHLT-T from Allegro MicroSystems LLC, in a SOT-23W. Pinout and pin descrip | Category | Sensor | | Pins | 3 | -## Ordering variants+## Electrical characteristics -- `A3212ELHLT-T`+Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Operating Ambient Temperature Range E (min) | TA | -40 |  |  | °C | Range E | 2 |+| Operating Ambient Temperature Range E (max) | TA |  |  | 85 | °C | Range E | 2 |+| Supply Voltage | VDD |  |  | 5 | V |  | 2 |+| Output Off Voltage | VOUT |  |  | 5 | V |  | 2 |+| Output Current | IOUT |  |  | 1 | mA |  | 2 |+| Maximum Junction Temperature | TJ(max) |  |  | 165 | °C |  | 2 |+| Storage Temperature | Tstg | -65 |  | 170 | °C |  | 2 |+| Supply Voltage Range | VDD | 2.5 | 2.75 | 3.5 | V | Operating | 4 |+| Output Leakage Current | IOFF |  |  | 1 | µA | VOUT = 3.5 V, Output off | 4 |+| Output On Voltage | VOUT |  | 100 | 300 | mV | IOUT = 1 mA, VDD = 2.75 V | 4 |+| Awake Time | tawake |  | 45 | 90 | µs |  | 4 |+| Period | tperiod |  | 45 | 90 | ms |  | 4 |+| Supply Current, chip awake (enabled) | IDD(EN) |  |  | 2 | mA | Chip awake (enabled) | 4 |+| Supply Current, chip asleep (disabled) | IDD(DIS) |  |  | 8 | µA | Chip asleep (disabled) | 4 |+| Average Supply Current | IDD(AVG) |  | 5.1 | 10 | µA | VDD = 2.75 V | 4 |+| Average Supply Current | IDD(AVG) |  | 6.7 | 10 | µA | VDD = 3.5 V | 4 |+| Operate Point, south pole (BOPS) | BOPS |  | 37 | 55 | G | Range E, TA = -40°C to 85°C; south pole to branded side; B > BOP, VOUT = Low (Output On) | 5 |+| Operate Point, north pole (BOPN) | BOPN | -55 | -40 |  | G | Range E, TA = -40°C to 85°C; north pole to branded side; B > BOP, VOUT = Low (Output On) | 5 |+| Release Point, south pole (BRPS) | BRPS | 10 | 31 |  | G | Range E, TA = -40°C to 85°C; south pole to branded side; B < BRP, VOUT = High (Output Off) | 5 |+| Release Point, north pole (BRPN) | BRPN |  | -34 | -10 | G | Range E, TA = -40°C to 85°C; north pole to branded side; B < BRP, VOUT = High (Output Off) | 5 |++## Materials and finish++As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).++| Part | Material | Colour / plating | Datasheet says | Page |+|---|---|---|---|---|+| contacts |  | tin | is a 3-pin low-profile SMD, and UA is a three-pin SIP for through￾hole mounting. Packages are lead (Pb) free (suffix, -T) with 100% matte-tin-plated leadframes. | 2 |  ## CAD (KiCad official) @@ -36,8 +67,8 @@ A3212ELHLT-T from Allegro MicroSystems LLC, in a SOT-23W. Pinout and pin descrip  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Allegro MicroSystems LLC datasheet](docs/a3212elhlt-t-datasheet.pdf) (13 pp, sha256 `781516b098a949a3`, retrieved 2026-08-17, tier: lcsc)-- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **Datasheet:** [Allegro MicroSystems LLC datasheet](docs/a3212elhlt-t-datasheet.pdf) (13 pp, sha256 `781516b098a949a3`, retrieved 2026-11-13, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/a3212elhlt-t-datasheet.pdf)
a3212elhlt-t-hero.glb
⋯ 1 unchanged line ⋯
a3212elhlt-t-hero.overlay.json+5−5
@@ -72,15 +72,15 @@     "glb": "a3212elhlt-t-etched.glb",     "glb_sha256": "bef95a1d3b938b01368b7aded447f97f3c5ee3c4c1d1290170c231a0a0cc0301",     "footprint": "a3212elhlt-t.kicad_mod",-    "footprint_sha256": "0d88c86c1b6d8c1aae4aa8c09386264c089d4451a128b6ccd63ed253f4300b15",+    "footprint_sha256": "d70f013a37023296292d5e78864f3e746b0e43d58c5d487c9f6437c95b85c7cb",     "pins": "page.json component.pins",-    "pins_sha256": "db4ba3d9976477106eddf175dc2f9d3e2bae60fb4019b3fc4a9b81b0caaf35dd"+    "pins_sha256": "a9d811874c0267de815c3835c82435608c1160157ba7f38f09cfcb56cb7bb432"   },-  "generator": "adom-wiki 1.8.23 (component_hero)",+  "generator": "adom-wiki 1.8.24 (component_hero)",   "labels": [     {       "pad": "1",-      "text": "VCC",+      "text": "VDD",       "x": -1.825,       "y": -0.95,       "align": "right",@@ -89,7 +89,7 @@     },     {       "pad": "2",-      "text": "GND",+      "text": "GROUND",       "x": -1.825,       "y": 0.95,       "align": "right",
a3212elhlt-t.kicad_mod+6−144
@@ -113,150 +113,6 @@ 		(fill yes) 		(layer "F.SilkS") 	)-	(fp_line-		(start -1.93 -1.5)-		(end -0.9 -1.5)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -1.93 -0.39)-		(end -1.93 -1.5)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -1.93 0.39)-		(end -0.9 0.39)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -1.93 1.5)-		(end -1.93 0.39)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -0.9 -1.7)-		(end 0.9 -1.7)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -0.9 -1.5)-		(end -0.9 -1.7)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -0.9 -0.39)-		(end -1.93 -0.39)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -0.9 0.39)-		(end -0.9 -0.39)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -0.9 1.5)-		(end -1.93 1.5)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -0.9 1.7)-		(end -0.9 1.5)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 0.9 -1.7)-		(end 0.9 -0.55)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 0.9 -0.55)-		(end 1.93 -0.55)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 0.9 0.55)-		(end 0.9 1.7)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 0.9 1.7)-		(end -0.9 1.7)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 1.93 -0.55)-		(end 1.93 0.55)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 1.93 0.55)-		(end 0.9 0.55)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	) 	(fp_poly 		(pts 			(xy -0.325 -1.45)@@ -312,4 +168,10 @@ 			(xyz 0 0 0) 		) 	)+	(fp_poly+		(pts (xy -1.93 -1.50) (xy -0.90 -1.50) (xy -0.90 -1.70) (xy 0.90 -1.70) (xy 0.90 -0.55) (xy 1.93 -0.55) (xy 1.93 0.55) (xy 0.90 0.55) (xy 0.90 1.70) (xy -0.90 1.70) (xy -0.90 1.50) (xy -1.93 1.50))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	) )
a3212elhlt-t.kicad_sym+2−2
@@ -9,11 +9,11 @@     )     (symbol "A3212ELHLT-T_1_1"     (pin power_in line (at -17.78 0.00 0) (length 5.08)-      (name "VCC" (effects (font (size 1.27 1.27))))+      (name "VDD" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )     (pin power_in line (at -17.78 -2.54 0) (length 5.08)-      (name "GND" (effects (font (size 1.27 1.27))))+      (name "GROUND" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )     (pin output line (at 17.78 0.00 180) (length 5.08)
a3212elhlt-t.lbr+4−4
@@ -88,8 +88,8 @@   <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>   <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="VCC" x="-17.78" y="0" length="middle" direction="pwr"/>-  <pin name="GND" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+  <pin name="VDD" x="-17.78" y="0" length="middle" direction="pwr"/>+  <pin name="GROUND" x="-17.78" y="-2.54" length="middle" direction="pwr"/>   <pin name="OUTPUT" x="17.78" y="0" length="middle" direction="out" rot="R180"/> </symbol> </symbols>@@ -102,8 +102,8 @@   <devices>     <device name="" package="SOT-23">       <connects>-        <connect gate="G$1" pin="VCC" pad="1"/>-        <connect gate="G$1" pin="GND" pad="2"/>+        <connect gate="G$1" pin="VDD" pad="1"/>+        <connect gate="G$1" pin="GROUND" pad="2"/>         <connect gate="G$1" pin="OUTPUT" pad="3"/>       </connects>       <technologies><technology name=""/></technologies>
docs/hero.png
⋯ 1 unchanged line ⋯
package.json+49−34
@@ -1,12 +1,14 @@ {   "slug": "a3212elhlt-t",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",-  "description": "Allegro MicroSystems LLC Hall Sensor, SOT-23W. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "Allegro MicroSystems LLC Hall Sensor, SOT-23W. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "sensor",-    "a3212elhlt-t"+    "a3212elhlt-t",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -25,8 +27,6 @@     "docs/a3212elhlt-t-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "a3212elhlt-t-etched.step",-    "a3212elhlt-t-etched.glb",     "a3212elhlt-t-hero.glb",     "a3212elhlt-t-hero.overlay.json"   ],@@ -47,29 +47,59 @@       "model_3d_step_plain": "a3212elhlt-t.step",       "lbr": "a3212elhlt-t.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "digikey": "620-1039-2-ND",+      "mouser": "250-A3212ELHLT-T"+    },+    "distributor_check": {+      "checked_at": "2026-11-13T07:22:14Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "620-1039-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "250-A3212ELHLT-T",+        "status": "found"+      }+    },     "pins": [       {         "number": "1",-        "name": "VCC",+        "name": "VDD",         "type": "power_in",-        "description": "Supply voltage input. Operating range 2.5 V to 3.5 V (absolute max 4.0 V). Bypass with a ceramic capacitor to GND close to the pin."+        "description": "Supply pin for the Hall-effect switch; the datasheet gives an operating supply range of 2.5 V to 3.5 V (2.75 V typical) and an absolute maximum of 5 V."       },       {         "number": "2",-        "name": "GND",+        "name": "GROUND",         "type": "power_in",-        "description": "Ground reference for the device."+        "description": "Ground reference for the device; an external bypass capacitor should be connected close to the Hall element between supply and ground to reduce external and chopper-stabilization noise."       },       {         "number": "3",         "name": "OUTPUT",         "type": "output",-        "description": "Open-drain Hall-switch output. Pulled low when the magnetic flux density exceeds the operate point (BOP); high-impedance (requires external pull-up) when below the release point (BRP)."+        "description": "Latched digital output from a MOSFET that sinks up to 1 mA when on, with VOUT(ON) of 100 mV typical and 300 mV maximum at 1 mA and VDD = 2.75 V; the off-state output voltage is rated to a maximum of 5 V."       }     ],     "provenance": {-      "extractor": "ds2sf",+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: The LH pinning drawing (PH-016-1) is only available as extracted text labels without orientation. Pi; The datasheet describes A3212ELHLT-T as 3000 pieces per reel SOT23W with no status footnote attached"+        ],+        "pages_sent": 13,+        "cost_usd": 0.0763,+        "at": "2026-11-13T07:22:32"+      },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/51eaef57c7614abb93214d17d2401cdc.pdf",         "pages": 13,@@ -98,14 +128,14 @@         "seat": "z = 0",         "extents_mm": [           2.5,-          3,+          3.0,           1.2         ],-        "zmin_mm": 0,-        "centre_offset_mm": 0,+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "dd5d1711204e1d8d26cd11490923bd84340820baa69538c385a4300ec2539bc0",-        "checked": "2026-10-07",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -123,25 +153,10 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "d950e51c84f11ef9a59c1d45fa157384743a4f46097d64f5b70cff63b689e430",-        "checked": "2026-11-12",+        "sha256": "ac53025f16c2924aac1861102ebfdbd6b601b2e18fa9386ce4abf9786f1f1b90",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]-  },-  "title": "A3212ELHLT-T",-  "brief": "Allegro MicroSystems LLC Hall Sensor, SOT-23W. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "metadata": {-    "specs": {-      "Manufacturer": "Allegro MicroSystems LLC",-      "Package": "SOT-23W",-      "Category": "Sensor",-      "Pins": "3"-    }-  },-  "discovery_triggers": [-    "a3212elhlt-t"-  ],-  "discovery_pitch": "A3212ELHLT-T (Allegro MicroSystems LLC) component page with datasheet-verified CAD.",-  "visibility": "public"+  } }
page.json+45−15
@@ -4,12 +4,14 @@   "slug": "a3212elhlt-t",   "title": "A3212ELHLT-T",   "brief": "Allegro MicroSystems LLC Hall Sensor, SOT-23W. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",     "sensor",-    "a3212elhlt-t"+    "a3212elhlt-t",+    "factory-2.0.0",+    "extractor-text"   ],   "component": {     "mpn": "A3212ELHLT-T",@@ -28,29 +30,59 @@       "model_3d_step_plain": "a3212elhlt-t.step",       "lbr": "a3212elhlt-t.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "digikey": "620-1039-2-ND",+      "mouser": "250-A3212ELHLT-T"+    },+    "distributor_check": {+      "checked_at": "2026-11-13T07:22:14Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "620-1039-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "250-A3212ELHLT-T",+        "status": "found"+      }+    },     "pins": [       {         "number": "1",-        "name": "VCC",+        "name": "VDD",         "type": "power_in",-        "description": "Supply voltage input. Operating range 2.5 V to 3.5 V (absolute max 4.0 V). Bypass with a ceramic capacitor to GND close to the pin."+        "description": "Supply pin for the Hall-effect switch; the datasheet gives an operating supply range of 2.5 V to 3.5 V (2.75 V typical) and an absolute maximum of 5 V."       },       {         "number": "2",-        "name": "GND",+        "name": "GROUND",         "type": "power_in",-        "description": "Ground reference for the device."+        "description": "Ground reference for the device; an external bypass capacitor should be connected close to the Hall element between supply and ground to reduce external and chopper-stabilization noise."       },       {         "number": "3",         "name": "OUTPUT",         "type": "output",-        "description": "Open-drain Hall-switch output. Pulled low when the magnetic flux density exceeds the operate point (BOP); high-impedance (requires external pull-up) when below the release point (BRP)."+        "description": "Latched digital output from a MOSFET that sinks up to 1 mA when on, with VOUT(ON) of 100 mV typical and 300 mV maximum at 1 mA and VDD = 2.75 V; the off-state output voltage is rated to a maximum of 5 V."       }     ],     "provenance": {-      "extractor": "ds2sf",+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: The LH pinning drawing (PH-016-1) is only available as extracted text labels without orientation. Pi; The datasheet describes A3212ELHLT-T as 3000 pieces per reel SOT23W with no status footnote attached"+        ],+        "pages_sent": 13,+        "cost_usd": 0.0763,+        "at": "2026-11-13T07:22:32"+      },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/51eaef57c7614abb93214d17d2401cdc.pdf",         "pages": 13,@@ -86,7 +118,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "dd5d1711204e1d8d26cd11490923bd84340820baa69538c385a4300ec2539bc0",-        "checked": "2026-10-07",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -104,8 +136,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "d950e51c84f11ef9a59c1d45fa157384743a4f46097d64f5b70cff63b689e430",-        "checked": "2026-11-12",+        "sha256": "ac53025f16c2924aac1861102ebfdbd6b601b2e18fa9386ce4abf9786f1f1b90",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -149,13 +181,11 @@     "docs/a3212elhlt-t-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "a3212elhlt-t-etched.step",-    "a3212elhlt-t-etched.glb",     "a3212elhlt-t-hero.glb",     "a3212elhlt-t-hero.overlay.json"   ],   "visibility": "public",   "updated_at": "2026-09-24T15:26:55.571Z",-  "description": "Allegro MicroSystems LLC Hall Sensor, SOT-23W. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "Allegro MicroSystems LLC Hall Sensor, SOT-23W. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "org": "adom" }\ No newline at end of file
viewers/footprint.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/A3212ELHLT-T footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-2.330 -2.100 4.660 4.200' style='width:100%;height:100%'><line class='ly-silk' x1='-0.760' y1='-1.560' x2='0.760' y2='-1.560' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-0.760' y1='-1.510' x2='-0.760' y2='-1.560' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-0.760' y1='0.390' x2='-0.760' y2='-0.390' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-0.760' y1='1.560' x2='-0.760' y2='1.510' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='0.760' y1='-1.560' x2='0.760' y2='-0.560' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='0.760' y1='0.560' x2='0.760' y2='1.560' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='0.760' y1='1.560' x2='-0.760' y2='1.560' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-courtyard' x1='-1.930' y1='-1.500' x2='-0.900' y2='-1.500' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-1.930' y1='-0.390' x2='-1.930' y2='-1.500' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-1.930' y1='0.390' x2='-0.900' y2='0.390' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-1.930' y1='1.500' x2='-1.930' y2='0.390' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-0.900' y1='-1.700' x2='0.900' y2='-1.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-0.900' y1='-1.500' x2='-0.900' y2='-1.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-0.900' y1='-0.390' x2='-1.930' y2='-0.390' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-0.900' y1='0.390' x2='-0.900' y2='-0.390' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-0.900' y1='1.500' x2='-1.930' y2='1.500' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-0.900' y1='1.700' x2='-0.900' y2='1.500' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='0.900' y1='-1.700' x2='0.900' y2='-0.550' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='0.900' y1='-0.550' x2='1.930' y2='-0.550' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='0.900' y1='0.550' x2='0.900' y2='1.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='0.900' y1='1.700' x2='-0.900' y2='1.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='1.930' y1='-0.550' x2='1.930' y2='0.550' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='1.930' y1='0.550' x2='0.900' y2='0.550' stroke='#4ade80' stroke-width='0.050'/><rect class='ly-copper pad' data-num='1' data-name='VCC' x='-1.675' y='-1.250' width='1.475' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.938' y='-0.950' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='GND' x='-1.675' y='0.650' width='1.475' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.938' y='0.950' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='OUTPUT' x='0.200' y='-0.300' width='1.475' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='0.938' y='0.000' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="RAY/A3212ELHLT-T", PINS=[{"desc":"","name":"VCC","number":"1","type":""},{"desc":"","name":"GND","number":"2","type":""},{"desc":"","name":"OUTPUT","number":"3","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>a3212elhlt-t</title>\ No newline at end of file
viewers/symbol.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/A3212ELHLT-T symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -200 1500 400' style='width:100%;height:100%'><rect x='-500.0' y='-150.0' width='1000.0' height='300.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='VCC'><line class='pinvis' x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VCC</text><g class='pingroup' data-num='2' data-name='GND'><line class='pinvis' x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>GND</text><g class='pingroup' data-num='3' data-name='OUTPUT'><line class='pinvis' x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>OUTPUT</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="RAY/A3212ELHLT-T", PINS=[{"desc":"","name":"VCC","number":"1","type":""},{"desc":"","name":"GND","number":"2","type":""},{"desc":"","name":"OUTPUT","number":"3","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>a3212elhlt-t</title>\ No newline at end of file