component

925-169J-51PT

Public Made by Adom

by adom

Amphenol RF RF Coaxial Connectors (SMPM jack), 925-169j-51pt. KiCad symbol, footprint and 3D as used on Adom boards.

componentconnectors925-169j-51ptboard-derived

Verified 925-169J-51PT

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 4 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Amphenol RF customer outline drawing 925-169J-51PT Rev Bfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: Amphenol RF customer outline drawing 925-169J-51PT Rev B (27-Mar-18), the file the product page links today (asset 4065789393, fetched 2026-10-27, sha256 b6fe30e3); replaces the page's raster + OCR copy
  • ✓Pins: 1 CONTACT = centre contact, 2 BODY = body; names from the drawing's materials list; both passive; descriptions rewritten from the drawing
  • ✓Footprint vs RECOMMENDED PCB LAYOUT: outer pads 9.40 mm long, outer edges 5.38 mm apart, inner edges 3.20 mm apart over the 4.19 mm at the board edge and 2.24 mm max. apart beyond; centre pad 0.38 mm min. wide: footprint pad 2 (5.39 / 3.21 / 2.25, 9.40 long, step 4.19 from the pad end at the board edge) and pad 1 (0.38 x 6.00) match within 0.01 mm (2.25 vs 2.24 max.)
  • •Centre pad length (6.00 mm in the footprint) and the 3.10 x 4.20 mm board slot are not dimensioned in the drawing
  • ✓3D body 5.72 x 3.99 x 3.28 mm (5.72 REF, Ø3.99 REF, 3.28 REF), 4.20 REF body in the slot, 1.47 REF below the mounting plane, contact tail on pad 1 at z 0: matches this part's drawing (the source board's swapped-model note does not apply to this STEP)
  • ✓DigiKey ARF2743TR-ND (tape and reel) and Mouser 523-925-169J-51PT confirmed by part lookup 2026-10-27
  • •Datasheet copy on the page is Amphenol's drawing with an OCR text layer added (ocrmypdf), because the drawing is vector artwork with no text; the drawing itself is unchanged; Amphenol's file sha256 b6fe30e3f7aa575f
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify 0.2.0: all checks pass
Evidencedatasheet (Amphenol RF)
Verified files✓ 925-169j-51pt.kicad_sym✓ 925-169j-51pt.kicad_mod✓ 925-169j-51pt.step
9 Oct 2026Claude (AI build)Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the...superseded
reviewfor all variants
  • •Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the same pages with an OCR text layer added (ocrmypdf/tesseract) so pin names can be checked against it.
9 Oct 2026Claude (AI build)On the source board the 925-169J-51PT footprint references the 925-126J-51P 3D model and v...superseded
reviewfor all variants
  • •On the source board the 925-169J-51PT footprint references the 925-126J-51P 3D model and vice versa (swapped). Confirm the model matches the Amphenol 925-169J-51PT drawing.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓2 of 2 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! 925-169j-51pt.kicad_sym! 925-169j-51pt.kicad_mod✓ 925-169j-51pt.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
← Commit history

Pin names from the datasheet; CAD and verification log updated

Caleb ·af20269222 ·19d ago ·parent ac4814b
4 files changed +58−12
925-169j-51pt.kicad_sym+2−2925-169j-51pt.lbr+4−4README.md+3−3verification.json+49−3
925-169j-51pt.kicad_sym+2−2
@@ -130,7 +130,7 @@ 			(pin passive line 				(at -2.54 0 0) 				(length 1.27)-				(name "In"+				(name "CONTACT" 					(effects 						(font (size 1.27 1.27)) 					)@@ -144,7 +144,7 @@ 			(pin passive line 				(at 2.54 0 180) 				(length 1.27)-				(name "Ext"+				(name "BODY" 					(effects 						(font (size 1.27 1.27)) 					)
925-169j-51pt.lbr+4−4
@@ -97,9 +97,9 @@   <text x="0.2540" y="3.0480" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-3.8100" size="1.27" layer="96" align="center">&gt;VALUE</text>   <wire x1="-2.5400" y1="0.0000" x2="-1.2700" y2="0.0000" width="0.254" layer="94"/>-  <pin name="In" x="-2.54" y="0" length="point" direction="pas" visible="pad"/>+  <pin name="CONTACT" x="-2.54" y="0" length="point" direction="pas" visible="pad"/>   <wire x1="2.5400" y1="0.0000" x2="1.2700" y2="0.0000" width="0.254" layer="94"/>-  <pin name="Ext" x="2.54" y="0" length="point" direction="pas" rot="R180" visible="pad"/>+  <pin name="BODY" x="2.54" y="0" length="point" direction="pas" rot="R180" visible="pad"/> </symbol> </symbols> <devicesets>@@ -111,8 +111,8 @@   <devices>     <device name="" package="925-169j-51pt">       <connects>-        <connect gate="G$1" pin="In" pad="1"/>-        <connect gate="G$1" pin="Ext" pad="2 2@2"/>+        <connect gate="G$1" pin="CONTACT" pad="1"/>+        <connect gate="G$1" pin="BODY" pad="2 2@2"/>       </connects>       <technologies>         <technology name="">
README.md+3−3
@@ -10,8 +10,8 @@  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | In | passive | Centre contact (RF signal). [from symbol] |-| 2 | Ext | passive | Outer body / shield (RF ground). [from symbol] |+| 1 | CONTACT | passive | Centre contact (RF signal), per the manufacturer drawing. [from drawing] |+| 2 | BODY | passive | Connector body / outer conductor (RF ground), per the manufacturer drawing. [from drawing] |  ## Key specifications @@ -32,7 +32,7 @@  ## Provenance -- **Datasheet:** [Amphenol RF datasheet](https://www.amphenolrf.com/en-us/assets/file/4065789393/) (sha256 `b6fe30e3f7aa575f`, retrieved 2026-10-08, tier: mfr)+- **Datasheet:** [Amphenol RF datasheet](https://www.amphenolrf.com/en-us/assets/file/4065789393/) (sha256 `b6fe30e3f7aa575f`, retrieved 2026-10-09, tier: mfr) - **CAD:** Footprint, symbol and 3D model as used on Adom board designs; the 3D model was extracted from the board STEP export. - **Pins:** KiCad symbol from the source board.
verification.json+49−3
@@ -4,7 +4,7 @@  "variants": [],  "entries": [   {-   "date": "2026-10-08",+   "date": "2026-10-09",    "by": {     "name": "Claude (AI build)",     "handle": "claude"@@ -49,13 +49,13 @@     }    ],    "files": {-    "925-169j-51pt.kicad_sym": "6bddbb9630ee0be80b8f2f2207d3a64d4d130beb05cc842ee09c78f2a4f5a9af",+    "925-169j-51pt.kicad_sym": "70007765cec27f190cbcc5f9cb40cd930d63b93f3cee0126748e7f5028d4217c",     "925-169j-51pt.kicad_mod": "f4b36d5523e02b8293498dca2d26fdcee1729526004ce56cec4bdbad717465f9",     "925-169j-51pt.step": "b6edf6e8278556d0a20535c5fe2b5b65d4424cac2e24ff9b72c47235048e4e95"    }   },   {-   "date": "2026-10-08",+   "date": "2026-10-09",    "by": {     "name": "Claude (AI build)",     "handle": "claude"@@ -76,6 +76,52 @@    ],    "evidence": [],    "files": {}+  },+  {+   "date": "2026-10-09",+   "by": {+    "name": "Claude (AI build)",+    "handle": "claude"+   },+   "status": "open",+   "title": "3D pose (component-page-verify): edge-mount SMPM: the body overhangs the board edge, so it...",+   "scope": [+    "review"+   ],+   "variants": [+    "*"+   ],+   "checks": [+    {+     "text": "3D pose (component-page-verify): edge-mount SMPM: the body overhangs the board edge, so its centre is ~3.5 mm off the pad pattern. This is the real part geometry from the source board, kept deliberately; a person should confirm against the drawing.",+     "result": "note"+    }+   ],+   "evidence": [],+   "files": {}+  },+  {+   "date": "2026-10-09",+   "by": {+    "name": "Claude (AI build)",+    "handle": "claude"+   },+   "status": "open",+   "title": "Datasheet text check: the manufacturer drawing is an image with no text layer, so automate...",+   "scope": [+    "review"+   ],+   "variants": [+    "*"+   ],+   "checks": [+    {+     "text": "Datasheet text check: the manufacturer drawing is an image with no text layer, so automated pin-name checks cannot read it; names follow the drawing and need a person to confirm.",+     "result": "note"+    }+   ],+   "evidence": [],+   "files": {}   }  ] }\ No newline at end of file