component
74VHC4051AFT
Public Made by Adomby adom
TOSHIBA Analog Switches, Multiplexers, TSSOP-16-175mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+55@@ -0,0 +1,55 @@+# 74VHC4051AFT++**TOSHIBA** · Analog Switches, Multiplexers · TSSOP-16-175mil++74VHC4051AFT from TOSHIBA, in a TSSOP-16-175mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A4 | bidirectional | Analog channel 4 switch terminal. Bidirectional analog I/O; connected to common Z when select A/B/C = 100 and Inhibit is low. Signal range 0 to VCC, RON ≈ 24 Ω @ VCC=4.5 V. |+| 2 | A6 | bidirectional | Analog channel 6 switch terminal. Bidirectional analog I/O; connected to common Z when select A/B/C = 110 and Inhibit is low. |+| 3 | Z | bidirectional | Common (COM) switch terminal. Bidirectional analog I/O that is routed to one of the eight A0..A7 channels according to select bits A/B/C when Inhibit is low. |+| 4 | A7 | bidirectional | Analog channel 7 switch terminal. Bidirectional analog I/O; connected to common Z when select A/B/C = 111 and Inhibit is low. |+| 5 | A5 | bidirectional | Analog channel 5 switch terminal. Bidirectional analog I/O; connected to common Z when select A/B/C = 101 and Inhibit is low. |+| 6 | INH | input | Inhibit (active-high disable). When INH = H, all channel switches are OFF and Z is isolated from A0..A7; when INH = L the multiplexer is enabled and select bits A/B/C route one channel to Z. VIH ≥ 2.0 V @ VCC = 3.0 V. |+| 7 | VEE | power_in | Negative analog supply reference for the switch cells. In this single-supply 74VHC variant VEE is typically tied to GND; for bipolar analog swings between VEE and VCC it may be biased below GND, subject to VCC-VEE ≤ absolute-max rating. |+| 8 | GND | power_in | Ground / negative logic supply reference (0 V). All digital signal levels and switch RON are referenced to this pin. |+| 9 | C | input | Channel-select bit C (MSB of the 3-bit address). Digital CMOS input; together with B and A selects one of A0..A7 to connect to Z when INH is low. VIL ≤ 0.8 V, VIH ≥ 2.0 V @ VCC = 3.0 V. |+| 10 | B | input | Channel-select bit B (middle bit of the 3-bit address). Digital CMOS input; combined with A and C forms channel number 0..7. VIL ≤ 0.8 V, VIH ≥ 2.0 V @ VCC = 3.0 V. |+| 11 | A | input | Channel-select bit A (LSB of the 3-bit address). Digital CMOS input; combined with B and C forms channel number 0..7. VIL ≤ 0.8 V, VIH ≥ 2.0 V @ VCC = 3.0 V. |+| 12 | A3 | bidirectional | Analog channel 3 switch terminal. Bidirectional analog I/O; connected to common Z when select A/B/C = 011 and Inhibit is low. |+| 13 | A0 | bidirectional | Analog channel 0 switch terminal. Bidirectional analog I/O; connected to common Z when select A/B/C = 000 and Inhibit is low. |+| 14 | A1 | bidirectional | Analog channel 1 switch terminal. Bidirectional analog I/O; connected to common Z when select A/B/C = 001 and Inhibit is low. |+| 15 | A2 | bidirectional | Analog channel 2 switch terminal. Bidirectional analog I/O; connected to common Z when select A/B/C = 010 and Inhibit is low. |+| 16 | VCC | power_in | Positive supply input, 2.0 V to 5.5 V operating range (absolute max 7.0 V). Sets the digital logic thresholds and the upper bound of the analog switch signal range. ICC ≤ 2 µA @ 25 °C. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | TOSHIBA |+| Package | TSSOP-16-175mil |+| Category | Interface |+| Pins | 16 |++## Ordering variants++- `74VHC4051AFT`++## CAD (KiCad official)++- Symbol: `74VHC4051AFT`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16-175mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [TOSHIBA datasheet](docs/74vhc4051aft-datasheet.pdf) (None pp, sha256 `d9a936f777a9cff6`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/74vhc4051aft-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "74vhc4051aft",+ "version": "0.1.0",+ "type": "component",+ "description": "TOSHIBA Analog Switches, Multiplexers, TSSOP-16-175mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "74vhc4051aft"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "74vhc4051aft.kicad_sym",+ "74vhc4051aft.kicad_mod",+ "74vhc4051aft.glb",+ "74vhc4051aft.step",+ "74vhc4051aft.lbr",+ "docs/hero.png",+ "docs/74vhc4051aft-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}