component
74HCT367D
Public Made by Adomby adom
Nexperia Logic ICs, SO-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.1
5 files changed
+554−543
74hct367d-hero.overlay.json+436−434@@ -1,436 +1,438 @@ {- "spec": "adom-hero 1.4",- "mpn": "74HCT367D",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 16,- "span_mm": 9.49,- "dash_mm": 0.2372,- "gap_mm": 0.1424,- "pad_stroke_mm": 0.0569- },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 7,- "pin1": {- "source": "footprint silkscreen",- "pad": "1"- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 16,- "sides": "top + mirrored underside (single-sided)",- "fallback_to_pad_number": 0- }- },- "align": {- "ok": true,- "centre_offset_mm": 0.0,- "tolerance_mm": 0.759,- "orientation_flipped": false,- "contacts_bbox_mm": [- -3.0,- 3.0,- -4.65,- 4.65- ],- "pads_bbox_mm": [- -3.45,- 3.45,- -4.745,- 4.745- ],- "seating_z_mm": 0.0- },- "sources": {- "glb": "74hct367d-etched.glb",- "glb_sha256": "3fa2ac679130a7ff44e70674315418ab9a483cb9fd1c908a6d9db6bc2bf6ae71",- "footprint": "74hct367d.kicad_mod",- "footprint_sha256": "f9b5075740f7816c540ae1137f025d659beaec522ed7b86b1a5274cc9a2d8a25",- "pins": "page.json component.pins",- "pins_sha256": "d73b2855cb8402312e1bc9929e700f47fbaa86f7e77111c0374020b9eee3c960"- },- "generator": "adom-wiki 1.7.76 (component_hero)",- "labels": [- {- "pad": "1",- "text": "1OE",- "x": -3.6,- "y": -4.445,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "2",- "text": "1A",- "x": -3.6,- "y": -3.175,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "3",- "text": "1Y",- "x": -3.6,- "y": -1.905,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "4",- "text": "2A",- "x": -3.6,- "y": -0.635,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "5",- "text": "2Y",- "x": -3.6,- "y": 0.635,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "6",- "text": "3A",- "x": -3.6,- "y": 1.905,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "7",- "text": "3Y",- "x": -3.6,- "y": 3.175,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "8",- "text": "GND",- "x": -3.6,- "y": 4.445,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "9",- "text": "4Y",- "x": 3.6,- "y": 4.445,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "10",- "text": "4A",- "x": 3.6,- "y": 3.175,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "11",- "text": "5Y",- "x": 3.6,- "y": 1.905,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "12",- "text": "5A",- "x": 3.6,- "y": 0.635,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "13",- "text": "6Y",- "x": 3.6,- "y": -0.635,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "14",- "text": "6A",- "x": 3.6,- "y": -1.905,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "15",- "text": "2OE",- "x": 3.6,- "y": -3.175,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "16",- "text": "VCC",- "x": 3.6,- "y": -4.445,- "align": "left",- "vertical": false,- "h": 0.6- }+ "spec": "adom-hero 1.4",+ "mpn": "74HCT367D",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 16,+ "span_mm": 9.49,+ "dash_mm": 0.2373,+ "gap_mm": 0.1424,+ "pad_stroke_mm": 0.0569+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 16,+ "sides": "top + mirrored underside (single-sided)",+ "omitted": null,+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "over_pads": true,+ "tolerance_mm": 0.759,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -4.65,+ 4.65+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -4.745,+ 4.745 ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- -2.475,- -4.445- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "2",- "shape": "roundrect",- "center_mm": [- -2.475,- -3.175- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "3",- "shape": "roundrect",- "center_mm": [- -2.475,- -1.905- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "4",- "shape": "roundrect",- "center_mm": [- -2.475,- -0.635- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "5",- "shape": "roundrect",- "center_mm": [- -2.475,- 0.635- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "6",- "shape": "roundrect",- "center_mm": [- -2.475,- 1.905- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "7",- "shape": "roundrect",- "center_mm": [- -2.475,- 3.175- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "8",- "shape": "roundrect",- "center_mm": [- -2.475,- 4.445- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "9",- "shape": "roundrect",- "center_mm": [- 2.475,- 4.445- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "10",- "shape": "roundrect",- "center_mm": [- 2.475,- 3.175- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "11",- "shape": "roundrect",- "center_mm": [- 2.475,- 1.905- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "12",- "shape": "roundrect",- "center_mm": [- 2.475,- 0.635- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "13",- "shape": "roundrect",- "center_mm": [- 2.475,- -0.635- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "14",- "shape": "roundrect",- "center_mm": [- 2.475,- -1.905- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "15",- "shape": "roundrect",- "center_mm": [- 2.475,- -3.175- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- },- {- "number": "16",- "shape": "roundrect",- "center_mm": [- 2.475,- -4.445- ],- "size_mm": [- 1.95,- 0.6- ],- "rot": 0.0- }- ]-}+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "74hct367d-etched.glb",+ "glb_sha256": "3fa2ac679130a7ff44e70674315418ab9a483cb9fd1c908a6d9db6bc2bf6ae71",+ "footprint": "74hct367d.kicad_mod",+ "footprint_sha256": "f9b5075740f7816c540ae1137f025d659beaec522ed7b86b1a5274cc9a2d8a25",+ "pins": "page.json component.pins",+ "pins_sha256": "d73b2855cb8402312e1bc9929e700f47fbaa86f7e77111c0374020b9eee3c960"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+ {+ "pad": "1",+ "text": "1OE",+ "x": -3.6,+ "y": -4.445,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "1A",+ "x": -3.6,+ "y": -3.175,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "1Y",+ "x": -3.6,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "2A",+ "x": -3.6,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "2Y",+ "x": -3.6,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "3A",+ "x": -3.6,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "3Y",+ "x": -3.6,+ "y": 3.175,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "GND",+ "x": -3.6,+ "y": 4.445,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "9",+ "text": "4Y",+ "x": 3.6,+ "y": 4.445,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "10",+ "text": "4A",+ "x": 3.6,+ "y": 3.175,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "11",+ "text": "5Y",+ "x": 3.6,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "12",+ "text": "5A",+ "x": 3.6,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "13",+ "text": "6Y",+ "x": 3.6,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "14",+ "text": "6A",+ "x": 3.6,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "15",+ "text": "2OE",+ "x": 3.6,+ "y": -3.175,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "16",+ "text": "VCC",+ "x": 3.6,+ "y": -4.445,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -4.445+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -3.175+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 3.175+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 4.445+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 4.445+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 3.175+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -3.175+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -4.445+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
74hct367d.lbr+12−3@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Nexperia Logic ICs, SO-16. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOIC-16_3.9x9.9mm_P1.27mm"> <description>SOIC-16, 3.9 x 9.9 mm, 1.27 mm pitch</description>@@ -94,6 +94,7 @@ </packages> <symbols> <symbol name="74HCT367D">+ <description>Nexperia Logic ICs, SO-16. Pinout cross-checked by two models against the datasheet</description> <wire x1="-12.7" y1="10.16" x2="12.7" y2="10.16" width="0.254" layer="94"/> <wire x1="12.7" y1="10.16" x2="12.7" y2="-12.7" width="0.254" layer="94"/> <wire x1="12.7" y1="-12.7" x2="-12.7" y2="-12.7" width="0.254" layer="94"/>@@ -120,7 +121,7 @@ </symbols> <devicesets> <deviceset name="74HCT367D" prefix="U">- <description></description>+ <description>Nexperia Logic ICs, SO-16. Pinout cross-checked by two models against the datasheet</description> <gates> <gate name="G$1" symbol="74HCT367D" x="0" y="0"/> </gates>@@ -144,7 +145,15 @@ <connect gate="G$1" pin="4A" pad="10"/> <connect gate="G$1" pin="4Y" pad="9"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="74HCT367D" constant="no"/>+ <attribute name="MANUFACTURER" value="Nexperia" constant="no"/>+ <attribute name="DATASHEET" value="https://assets.nexperia.com/documents/data-sheet/74HCT367D.pdf" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/74hct367d" constant="no"/>+ <attribute name="LCSC_PN" value="C458756" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
README.md+61−61@@ -8,22 +8,22 @@ | Pin | Name | Type | Function | |---|---|---|---|-| 1 | 1OE | input | Output enable input, active LOW; a HIGH on this pin forces the affected outputs to the high-impedance OFF-state (Z). |-| 2 | 1A | input | Data input of buffer 1; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes. |-| 3 | 1Y | tri_state | Bus output of buffer 1, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA. |-| 4 | 2A | input | Data input of buffer 2; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes. |-| 5 | 2Y | tri_state | Bus output of buffer 2, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA. |-| 6 | 3A | input | Data input of buffer 3; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes. |-| 7 | 3Y | tri_state | Bus output of buffer 3, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA. |+| 1 | 1OE | input | Output enable input (active LOW); a HIGH on nOE causes the outputs to assume a high-impedance OFF-state. |+| 2 | 1A | input | Data input 1A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC. |+| 3 | 1Y | tri_state | 3-state bus output 1Y, which is high-impedance (Z) when the output enable nOE is HIGH. |+| 4 | 2A | input | Data input 2A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC. |+| 5 | 2Y | tri_state | 3-state bus output 2Y, which is high-impedance (Z) when the output enable nOE is HIGH. |+| 6 | 3A | input | Data input 3A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC. |+| 7 | 3Y | tri_state | 3-state bus output 3Y, which is high-impedance (Z) when the output enable nOE is HIGH. | | 8 | GND | power_in | Ground (0 V) reference for all voltages on the device. |-| 9 | 4Y | tri_state | Bus output of buffer 4, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA. |-| 10 | 4A | input | Data input of buffer 4; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes. |-| 11 | 5Y | tri_state | Bus output of buffer 5, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA. |-| 12 | 5A | input | Data input of buffer 5; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes. |-| 13 | 6Y | tri_state | Bus output of buffer 6, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA. |-| 14 | 6A | input | Data input of buffer 6; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes. |-| 15 | 2OE | input | Output enable input, active LOW; a HIGH on this pin forces the affected outputs to the high-impedance OFF-state (Z). |-| 16 | VCC | power_in | Supply voltage: recommended 2.0 V to 6.0 V for 74HC367 and 4.5 V to 5.5 V for 74HCT367, with an absolute maximum of -0.5 V to +7 V. |+| 9 | 4Y | tri_state | 3-state bus output 4Y, which is high-impedance (Z) when the output enable nOE is HIGH. |+| 10 | 4A | input | Data input 4A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC. |+| 11 | 5Y | tri_state | 3-state bus output 5Y, which is high-impedance (Z) when the output enable nOE is HIGH. |+| 12 | 5A | input | Data input 5A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC. |+| 13 | 6Y | tri_state | 3-state bus output 6Y, which is high-impedance (Z) when the output enable nOE is HIGH. |+| 14 | 6A | input | Data input 6A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC. |+| 15 | 2OE | input | Output enable input (active LOW); a HIGH on nOE causes the outputs to assume a high-impedance OFF-state. |+| 16 | VCC | power_in | Supply voltage; the recommended range for 74HCT367 is 4.5 V to 5.5 V, with an absolute maximum of +7 V. | ## Key specifications @@ -40,59 +40,59 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage (absolute maximum) | VCC | -0.5 | | 7 | V | | 4 |-| Input clamping current | IIK | -20 | | 20 | mA | VI < -0.5 V or VI > VCC + 0.5 V | 4 |-| Output clamping current | IOK | -20 | | 20 | mA | VO < -0.5 V or VO > VCC + 0.5 V | 4 |-| Output current | IO | -35 | | 35 | mA | -0.5 V < VO < VCC + 0.5 V | 4 |-| Supply current | ICC | | | 70 | mA | | 4 |-| Ground current | IGND | -70 | | | mA | | 4 |-| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |-| Total power dissipation | Ptot | | | 500 | mW | | 4 |-| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | 74HCT367 | 4 |-| Input voltage | VI | 0 | | | V | 74HCT367; maximum printed as VCC | 4 |-| Output voltage | VO | 0 | | | V | 74HCT367; maximum printed as VCC | 4 |-| Ambient temperature | Tamb | -40 | 25 | 125 | °C | 74HCT367 | 4 |-| Input transition rise and fall rate | Δt/ΔV | | 1.67 | 139 | ns/V | VCC = 4.5 V; 74HCT367 | 4 |+| supply voltage | VCC | -0.5 | | 7 | V | | 4 |+| input clamping current | IIK | -20 | | 20 | mA | VI < -0.5 V or VI > VCC + 0.5 V | 4 |+| output clamping current | IOK | -20 | | 20 | mA | VO < -0.5 V or VO > VCC + 0.5 V | 4 |+| output current | IO | -35 | | 35 | mA | -0.5 V < VO < VCC + 0.5 V | 4 |+| supply current | ICC | | | 70 | mA | | 4 |+| ground current | IGND | -70 | | | mA | | 4 |+| storage temperature | Tstg | -65 | | 150 | °C | | 4 |+| total power dissipation | Ptot | | | 500 | mW | [1] For SOT109-1 (SO16): derates linearly with 12.4 mW/K above 110 °C | 4 |+| supply voltage | VCC | 4.5 | 5 | 5.5 | V | | 4 |+| input voltage | VI | 0 | | | V | | 4 |+| output voltage | VO | 0 | | | V | | 4 |+| ambient temperature | Tamb | -40 | 25 | 125 | °C | | 4 |+| input transition rise and fall rate | Δt/ΔV | | 1.67 | 139 | ns/V | VCC = 4.5 V | 4 | | HIGH-level input voltage | VIH | 2 | 1.6 | | V | VCC = 4.5 V to 5.5 V; 25 °C | 6 | | HIGH-level input voltage | VIH | 2 | | | V | VCC = 4.5 V to 5.5 V; -40 °C to +85 °C | 6 | | LOW-level input voltage | VIL | | 1.2 | 0.8 | V | VCC = 4.5 V to 5.5 V; 25 °C | 6 | | LOW-level input voltage | VIL | | | 0.8 | V | VCC = 4.5 V to 5.5 V; -40 °C to +85 °C | 6 |-| HIGH-level output voltage | VOH | 4.4 | 4.5 | | V | VI = VIH or VIL; VCC = 4.5 V; IO = -20 μA; 25 °C | 6 |-| HIGH-level output voltage | VOH | 4.4 | | | V | VI = VIH or VIL; VCC = 4.5 V; IO = -20 μA; -40 °C to +85 °C | 6 |-| HIGH-level output voltage | VOH | 3.98 | 4.32 | | V | VI = VIH or VIL; VCC = 4.5 V; IO = -6 mA; 25 °C | 6 |-| HIGH-level output voltage | VOH | 3.84 | | | V | VI = VIH or VIL; VCC = 4.5 V; IO = -6 mA; -40 °C to +85 °C | 6 |-| HIGH-level output voltage | VOH | 3.7 | | | V | VI = VIH or VIL; VCC = 4.5 V; IO = -6 mA; -40 °C to +125 °C | 6 |-| LOW-level output voltage | VOL | | 0 | 0.1 | V | VI = VIH or VIL; VCC = 4.5 V; IO = 20 μA; 25 °C | 6 |-| LOW-level output voltage | VOL | | | 0.1 | V | VI = VIH or VIL; VCC = 4.5 V; IO = 20 μA; -40 °C to +85 °C | 6 |-| LOW-level output voltage | VOL | | 0.16 | 0.26 | V | VI = VIH or VIL; VCC = 4.5 V; IO = 6.0 mA; 25 °C | 6 |-| LOW-level output voltage | VOL | | | 0.33 | V | VI = VIH or VIL; VCC = 4.5 V; IO = 6.0 mA; -40 °C to +85 °C | 6 |-| LOW-level output voltage | VOL | | | 0.4 | V | VI = VIH or VIL; VCC = 4.5 V; IO = 6.0 mA; -40 °C to +125 °C | 6 |-| Input leakage current | II | -0.1 | | 0.1 | μA | VI = VCC or GND; VCC = 5.5 V; 25 °C | 6 |-| Input leakage current | II | -1 | | 1 | μA | VI = VCC or GND; VCC = 5.5 V; -40 °C to +85 °C | 6 |+| HIGH-level output voltage | VOH | 4.4 | 4.5 | | V | IO = -20 μA; VI = VIH or VIL; VCC = 4.5 V; 25 °C | 6 |+| HIGH-level output voltage | VOH | 4.4 | | | V | IO = -20 μA; VI = VIH or VIL; VCC = 4.5 V; -40 °C to +85 °C | 6 |+| HIGH-level output voltage | VOH | 3.98 | 4.32 | | V | IO = -6 mA; VI = VIH or VIL; VCC = 4.5 V; 25 °C | 6 |+| HIGH-level output voltage | VOH | 3.84 | | | V | IO = -6 mA; VI = VIH or VIL; VCC = 4.5 V; -40 °C to +85 °C | 6 |+| HIGH-level output voltage | VOH | 3.7 | | | V | IO = -6 mA; VI = VIH or VIL; VCC = 4.5 V; -40 °C to +125 °C | 6 |+| LOW-level output voltage | VOL | | 0 | 0.1 | V | IO = 20 μA; VI = VIH or VIL; VCC = 4.5 V; 25 °C | 6 |+| LOW-level output voltage | VOL | | | 0.1 | V | IO = 20 μA; VI = VIH or VIL; VCC = 4.5 V; -40 °C to +85 °C | 6 |+| LOW-level output voltage | VOL | | 0.16 | 0.26 | V | IO = 6.0 mA; VI = VIH or VIL; VCC = 4.5 V; 25 °C | 6 |+| LOW-level output voltage | VOL | | | 0.33 | V | IO = 6.0 mA; VI = VIH or VIL; VCC = 4.5 V; -40 °C to +85 °C | 6 |+| LOW-level output voltage | VOL | | | 0.4 | V | IO = 6.0 mA; VI = VIH or VIL; VCC = 4.5 V; -40 °C to +125 °C | 6 |+| input leakage current | II | -0.1 | | 0.1 | μA | VI = VCC or GND; VCC = 5.5 V; 25 °C | 6 |+| input leakage current | II | -1 | | 1 | μA | VI = VCC or GND; VCC = 5.5 V; -40 °C to +85 °C | 6 | | OFF-state output current | IOZ | -0.5 | | 0.5 | μA | VI = VIH or VIL; VCC = 5.5 V; VO = VCC or GND; 25 °C | 6 | | OFF-state output current | IOZ | -5 | | 5 | μA | VI = VIH or VIL; VCC = 5.5 V; VO = VCC or GND; -40 °C to +85 °C | 6 | | OFF-state output current | IOZ | -10 | | 10 | μA | VI = VIH or VIL; VCC = 5.5 V; VO = VCC or GND; -40 °C to +125 °C | 6 |-| Supply current | ICC | | | 8 | μA | VI = VCC or GND; VCC = 5.5 V; IO = 0 A; 25 °C | 6 |-| Supply current | ICC | | | 80 | μA | VI = VCC or GND; VCC = 5.5 V; IO = 0 A; -40 °C to +85 °C | 6 |-| Supply current | ICC | | | 160 | μA | VI = VCC or GND; VCC = 5.5 V; IO = 0 A; -40 °C to +125 °C | 6 |-| Additional supply current | ΔICC | | 100 | 360 | μA | per input pin; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A; 1OE, nA inputs; 25 °C | 6 |-| Additional supply current | ΔICC | | | 450 | μA | per input pin; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A; 1OE, nA inputs; -40 °C to +85 °C | 6 |-| Additional supply current | ΔICC | | | 490 | μA | per input pin; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A; 1OE, nA inputs; -40 °C to +125 °C | 6 |-| Additional supply current | ΔICC | | 90 | 324 | μA | per input pin; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A; 2OE input; 25 °C | 6 |-| Additional supply current | ΔICC | | | 405 | μA | per input pin; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A; 2OE input; -40 °C to +85 °C | 6 |-| Additional supply current | ΔICC | | | 441 | μA | per input pin; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A; 2OE input; -40 °C to +125 °C | 6 |-| Propagation delay | tpd | | 14 | 25 | ns | VCC = 4.5 V; nA to nY; see Fig. 6; 25 °C | 7 |-| Propagation delay | tpd | | | 31 | ns | VCC = 4.5 V; nA to nY; see Fig. 6; -40 °C to +85 °C | 7 |-| Propagation delay | tpd | | | 38 | ns | VCC = 4.5 V; nA to nY; see Fig. 6; -40 °C to +125 °C | 7 |-| Enable time | ten | | 16 | 35 | ns | VCC = 4.5 V; nOE to nY; see Fig. 7; 25 °C | 7 |-| Enable time | ten | | | 44 | ns | VCC = 4.5 V; nOE to nY; see Fig. 7; -40 °C to +85 °C | 7 |-| Enable time | ten | | | 53 | ns | VCC = 4.5 V; nOE to nY; see Fig. 7; -40 °C to +125 °C | 7 |-| Disable time | tdis | | 21 | 35 | ns | VCC = 4.5 V; nOE to nY; see Fig. 7; 25 °C | 7 |-| Disable time | tdis | | | 44 | ns | VCC = 4.5 V; nOE to nY; see Fig. 7; -40 °C to +85 °C | 7 |-| Disable time | tdis | | | 53 | ns | VCC = 4.5 V; nOE to nY; see Fig. 7; -40 °C to +125 °C | 7 |-| Transition time | tt | | 5 | 12 | ns | VCC = 4.5 V; see Fig. 6; 25 °C | 7 |-| Transition time | tt | | | 15 | ns | VCC = 4.5 V; see Fig. 6; -40 °C to +85 °C | 7 |-| Transition time | tt | | | 18 | ns | VCC = 4.5 V; see Fig. 6; -40 °C to +125 °C | 7 |+| supply current | ICC | | | 8 | μA | VI = VCC or GND; VCC = 5.5 V; IO = 0 A; 25 °C | 6 |+| supply current | ICC | | | 80 | μA | VI = VCC or GND; VCC = 5.5 V; IO = 0 A; -40 °C to +85 °C | 6 |+| supply current | ICC | | | 160 | μA | VI = VCC or GND; VCC = 5.5 V; IO = 0 A; -40 °C to +125 °C | 6 |+| additional supply current, 1OE and nA inputs | ΔICC | | 100 | 360 | μA | per input pin; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A; 25 °C | 6 |+| additional supply current, 1OE and nA inputs | ΔICC | | | 450 | μA | per input pin; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A; -40 °C to +85 °C | 6 |+| additional supply current, 1OE and nA inputs | ΔICC | | | 490 | μA | per input pin; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A; -40 °C to +125 °C | 6 |+| additional supply current, 2OE input | ΔICC | | 90 | 324 | μA | per input pin; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A; 25 °C | 6 |+| additional supply current, 2OE input | ΔICC | | | 405 | μA | per input pin; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A; -40 °C to +85 °C | 6 |+| additional supply current, 2OE input | ΔICC | | | 441 | μA | per input pin; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A; -40 °C to +125 °C | 6 |+| propagation delay nA to nY | tpd | | 14 | 25 | ns | nA to nY; see Fig. 6; VCC = 4.5 V; 25 °C | 7 |+| propagation delay nA to nY | tpd | | | 31 | ns | nA to nY; see Fig. 6; VCC = 4.5 V; -40 °C to +85 °C | 7 |+| propagation delay nA to nY | tpd | | | 38 | ns | nA to nY; see Fig. 6; VCC = 4.5 V; -40 °C to +125 °C | 7 |+| enable time nOE to nY | ten | | 16 | 35 | ns | nOE to nY; see Fig. 7; VCC = 4.5 V; 25 °C | 7 |+| enable time nOE to nY | ten | | | 44 | ns | nOE to nY; see Fig. 7; VCC = 4.5 V; -40 °C to +85 °C | 7 |+| enable time nOE to nY | ten | | | 53 | ns | nOE to nY; see Fig. 7; VCC = 4.5 V; -40 °C to +125 °C | 7 |+| disable time nOE to nY | tdis | | 21 | 35 | ns | nOE to nY; see Fig. 7; VCC = 4.5 V; 25 °C | 7 |+| disable time nOE to nY | tdis | | | 44 | ns | nOE to nY; see Fig. 7; VCC = 4.5 V; -40 °C to +85 °C | 7 |+| disable time nOE to nY | tdis | | | 53 | ns | nOE to nY; see Fig. 7; VCC = 4.5 V; -40 °C to +125 °C | 7 |+| transition time | tt | | 5 | 12 | ns | see Fig. 6; VCC = 4.5 V; 25 °C | 7 |+| transition time | tt | | | 15 | ns | see Fig. 6; VCC = 4.5 V; -40 °C to +85 °C | 7 |+| transition time | tt | | | 18 | ns | see Fig. 6; VCC = 4.5 V; -40 °C to +125 °C | 7 | ## CAD (KiCad official)
package.json+21−21@@ -1,6 +1,6 @@ { "slug": "74hct367d",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Nexperia Logic ICs, SO-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -52,7 +52,7 @@ "lcsc": "C458756" }, "distributor_check": {- "checked_at": "2026-10-21T18:27:10Z",+ "checked_at": "2026-10-21T18:42:58Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -68,43 +68,43 @@ "number": "1", "name": "1OE", "type": "input",- "description": "Output enable input, active LOW; a HIGH on this pin forces the affected outputs to the high-impedance OFF-state (Z)."+ "description": "Output enable input (active LOW); a HIGH on nOE causes the outputs to assume a high-impedance OFF-state." }, { "number": "2", "name": "1A", "type": "input",- "description": "Data input of buffer 1; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes."+ "description": "Data input 1A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC." }, { "number": "3", "name": "1Y", "type": "tri_state",- "description": "Bus output of buffer 1, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA."+ "description": "3-state bus output 1Y, which is high-impedance (Z) when the output enable nOE is HIGH." }, { "number": "4", "name": "2A", "type": "input",- "description": "Data input of buffer 2; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes."+ "description": "Data input 2A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC." }, { "number": "5", "name": "2Y", "type": "tri_state",- "description": "Bus output of buffer 2, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA."+ "description": "3-state bus output 2Y, which is high-impedance (Z) when the output enable nOE is HIGH." }, { "number": "6", "name": "3A", "type": "input",- "description": "Data input of buffer 3; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes."+ "description": "Data input 3A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC." }, { "number": "7", "name": "3Y", "type": "tri_state",- "description": "Bus output of buffer 3, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA."+ "description": "3-state bus output 3Y, which is high-impedance (Z) when the output enable nOE is HIGH." }, { "number": "8",@@ -116,49 +116,49 @@ "number": "9", "name": "4Y", "type": "tri_state",- "description": "Bus output of buffer 4, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA."+ "description": "3-state bus output 4Y, which is high-impedance (Z) when the output enable nOE is HIGH." }, { "number": "10", "name": "4A", "type": "input",- "description": "Data input of buffer 4; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes."+ "description": "Data input 4A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC." }, { "number": "11", "name": "5Y", "type": "tri_state",- "description": "Bus output of buffer 5, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA."+ "description": "3-state bus output 5Y, which is high-impedance (Z) when the output enable nOE is HIGH." }, { "number": "12", "name": "5A", "type": "input",- "description": "Data input of buffer 5; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes."+ "description": "Data input 5A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC." }, { "number": "13", "name": "6Y", "type": "tri_state",- "description": "Bus output of buffer 6, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA."+ "description": "3-state bus output 6Y, which is high-impedance (Z) when the output enable nOE is HIGH." }, { "number": "14", "name": "6A", "type": "input",- "description": "Data input of buffer 6; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes."+ "description": "Data input 6A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC." }, { "number": "15", "name": "2OE", "type": "input",- "description": "Output enable input, active LOW; a HIGH on this pin forces the affected outputs to the high-impedance OFF-state (Z)."+ "description": "Output enable input (active LOW); a HIGH on nOE causes the outputs to assume a high-impedance OFF-state." }, { "number": "16", "name": "VCC", "type": "power_in",- "description": "Supply voltage: recommended 2.0 V to 6.0 V for 74HC367 and 4.5 V to 5.5 V for 74HCT367, with an absolute maximum of -0.5 V to +7 V."+ "description": "Supply voltage; the recommended range for 74HCT367 is 4.5 V to 5.5 V, with an absolute maximum of +7 V." } ], "provenance": {@@ -172,11 +172,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The datasheet gives 1OE and 2OE as output enables but does not state which buffer outputs each enabl; The datasheet calls these 'bus output' and does not use the word tri-state in the pin table. The tri"+ "extractor flagged: The datasheet gives no per-pin voltage or current limits for inputs and outputs; the descriptions us; The 74HCT367 recommended supply range (4.5 V to 5.5 V) and absolute maximum (+7 V) come from Tables " ], "pages_sent": 14,- "cost_usd": 0.0658,- "at": "2026-10-21T18:21:50"+ "cost_usd": 0.0195,+ "at": "2026-10-21T18:35:58" }, "datasheet": { "url": "https://assets.nexperia.com/documents/data-sheet/74HCT367D.pdf",@@ -231,7 +231,7 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "a5dc793f87e17a8fed9b3e836fc28663e4cdfc5cb8999b18edc6ff6d3eadf767",+ "sha256": "82a406c539f3cf3dc2479a6013b6bbd5eaa8788da2f1a9e46e8cb727ad119425", "checked": "2026-10-21", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }
page.json+24−24@@ -4,7 +4,7 @@ "slug": "74hct367d", "title": "74HCT367D", "brief": "Nexperia Logic ICs, SO-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -34,7 +34,7 @@ "lcsc": "C458756" }, "distributor_check": {- "checked_at": "2026-10-21T18:27:10Z",+ "checked_at": "2026-10-21T18:42:58Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -50,43 +50,43 @@ "number": "1", "name": "1OE", "type": "input",- "description": "Output enable input, active LOW; a HIGH on this pin forces the affected outputs to the high-impedance OFF-state (Z)."+ "description": "Output enable input (active LOW); a HIGH on nOE causes the outputs to assume a high-impedance OFF-state." }, { "number": "2", "name": "1A", "type": "input",- "description": "Data input of buffer 1; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes."+ "description": "Data input 1A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC." }, { "number": "3", "name": "1Y", "type": "tri_state",- "description": "Bus output of buffer 1, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA."+ "description": "3-state bus output 1Y, which is high-impedance (Z) when the output enable nOE is HIGH." }, { "number": "4", "name": "2A", "type": "input",- "description": "Data input of buffer 2; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes."+ "description": "Data input 2A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC." }, { "number": "5", "name": "2Y", "type": "tri_state",- "description": "Bus output of buffer 2, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA."+ "description": "3-state bus output 2Y, which is high-impedance (Z) when the output enable nOE is HIGH." }, { "number": "6", "name": "3A", "type": "input",- "description": "Data input of buffer 3; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes."+ "description": "Data input 3A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC." }, { "number": "7", "name": "3Y", "type": "tri_state",- "description": "Bus output of buffer 3, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA."+ "description": "3-state bus output 3Y, which is high-impedance (Z) when the output enable nOE is HIGH." }, { "number": "8",@@ -98,49 +98,49 @@ "number": "9", "name": "4Y", "type": "tri_state",- "description": "Bus output of buffer 4, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA."+ "description": "3-state bus output 4Y, which is high-impedance (Z) when the output enable nOE is HIGH." }, { "number": "10", "name": "4A", "type": "input",- "description": "Data input of buffer 4; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes."+ "description": "Data input 4A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC." }, { "number": "11", "name": "5Y", "type": "tri_state",- "description": "Bus output of buffer 5, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA."+ "description": "3-state bus output 5Y, which is high-impedance (Z) when the output enable nOE is HIGH." }, { "number": "12", "name": "5A", "type": "input",- "description": "Data input of buffer 5; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes."+ "description": "Data input 5A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC." }, { "number": "13", "name": "6Y", "type": "tri_state",- "description": "Bus output of buffer 6, which goes to high impedance when the output enable is HIGH; output current is limited to ±35 mA."+ "description": "3-state bus output 6Y, which is high-impedance (Z) when the output enable nOE is HIGH." }, { "number": "14", "name": "6A", "type": "input",- "description": "Data input of buffer 6; 74HC367 uses CMOS input levels and 74HCT367 uses TTL input levels, and inputs include clamp diodes."+ "description": "Data input 6A; inputs include clamp diodes, so current-limiting resistors can be used to interface the input to voltages above VCC." }, { "number": "15", "name": "2OE", "type": "input",- "description": "Output enable input, active LOW; a HIGH on this pin forces the affected outputs to the high-impedance OFF-state (Z)."+ "description": "Output enable input (active LOW); a HIGH on nOE causes the outputs to assume a high-impedance OFF-state." }, { "number": "16", "name": "VCC", "type": "power_in",- "description": "Supply voltage: recommended 2.0 V to 6.0 V for 74HC367 and 4.5 V to 5.5 V for 74HCT367, with an absolute maximum of -0.5 V to +7 V."+ "description": "Supply voltage; the recommended range for 74HCT367 is 4.5 V to 5.5 V, with an absolute maximum of +7 V." } ], "provenance": {@@ -154,11 +154,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The datasheet gives 1OE and 2OE as output enables but does not state which buffer outputs each enabl; The datasheet calls these 'bus output' and does not use the word tri-state in the pin table. The tri"+ "extractor flagged: The datasheet gives no per-pin voltage or current limits for inputs and outputs; the descriptions us; The 74HCT367 recommended supply range (4.5 V to 5.5 V) and absolute maximum (+7 V) come from Tables " ], "pages_sent": 14,- "cost_usd": 0.0658,- "at": "2026-10-21T18:21:50"+ "cost_usd": 0.0195,+ "at": "2026-10-21T18:35:58" }, "datasheet": { "url": "https://assets.nexperia.com/documents/data-sheet/74HCT367D.pdf",@@ -213,7 +213,7 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "a5dc793f87e17a8fed9b3e836fc28663e4cdfc5cb8999b18edc6ff6d3eadf767",+ "sha256": "82a406c539f3cf3dc2479a6013b6bbd5eaa8788da2f1a9e46e8cb727ad119425", "checked": "2026-10-21", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }@@ -907,7 +907,7 @@ "74hct367d-hero.overlay.json", "74hct367d-etched.glb" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "Nexperia Logic ICs, SO-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }