← Commit history

Initial commit: component/74act11244pwr

Ray ·2767b10020 ·
2 files changed +312
README.mdadded+60
@@ -0,0 +1,60 @@+# 74ACT11244PWR++**Texas Instruments** · Buffers, Drivers, Receivers, Transceivers · TSSOP-24++74ACT11244PWR from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | 1Y1 | tri_state | Tri-state buffered output for input 1A1; driven to high impedance when 1OE is high. |+| 2 | 1Y2 | tri_state | Tri-state buffered output for input 1A2; driven to high impedance when 1OE is high. |+| 3 | 1Y3 | tri_state | Tri-state buffered output for input 1A3; driven to high impedance when 1OE is high. |+| 4 | 1Y4 | tri_state | Tri-state buffered output for input 1A4; driven to high impedance when 1OE is high. |+| 5 | GND | power_in | Ground; center-pin configuration to minimize high-speed switching noise. |+| 6 | GND | power_in | Ground; center-pin configuration to minimize high-speed switching noise. |+| 7 | GND | power_in | Ground; center-pin configuration to minimize high-speed switching noise. |+| 8 | GND | power_in | Ground; center-pin configuration to minimize high-speed switching noise. |+| 9 | 2Y1 | tri_state | Tri-state buffered output for input 2A1; driven to high impedance when 2OE is high. |+| 10 | 2Y2 | tri_state | Tri-state buffered output for input 2A2; driven to high impedance when 2OE is high. |+| 11 | 2Y3 | tri_state | Tri-state buffered output for input 2A3; driven to high impedance when 2OE is high. |+| 12 | 2Y4 | tri_state | Tri-state buffered output for input 2A4; driven to high impedance when 2OE is high. |+| 13 | 2OE | input | Active-low output enable for buffer section 2; outputs 2Y1-2Y4 driven to high impedance when high. |+| 14 | 2A4 | input | Data input for buffer section 2, channel 4; output 2Y4 follows input when 2OE is low. |+| 15 | 2A3 | input | Data input for buffer section 2, channel 3; output 2Y3 follows input when 2OE is low. |+| 16 | 2A2 | input | Data input for buffer section 2, channel 2; output 2Y2 follows input when 2OE is low. |+| 17 | 2A1 | input | Data input for buffer section 2, channel 1; output 2Y1 follows input when 2OE is low. |+| 18 | VCC | power_in | Supply voltage; center-pin configuration to minimize high-speed switching noise; 4.5 V to 5.5 V recommended. |+| 19 | VCC | power_in | Supply voltage; center-pin configuration to minimize high-speed switching noise; 4.5 V to 5.5 V recommended. |+| 20 | 1A4 | input | Data input for buffer section 1, channel 4; output 1Y4 follows input when 1OE is low. |+| 21 | 1A3 | input | Data input for buffer section 1, channel 3; output 1Y3 follows input when 1OE is low. |+| 22 | 1A2 | input | Data input for buffer section 1, channel 2; output 1Y2 follows input when 1OE is low. |+| 23 | 1A1 | input | Data input for buffer section 1, channel 1; output 1Y1 follows input when 1OE is low. |+| 24 | 1OE | input | Active-low output enable for buffer section 1; outputs 1Y1-1Y4 driven to high impedance when high. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-24 |+| Category | Logic |+| Pins | 24 |++## CAD (KiCad official)++- Symbol: `74ACT11244PWR`+- Footprint: `Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm`+- 3D model: TSSOP-24 (KiCad packages3D, STEP)+- 3D model files: `74act11244pwr-etched.step` / `74act11244pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74act11244pwr.step` / `74act11244pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/74act11244.pdf) (14 pp, sha256 `a41e4787e3d3fc84`, retrieved 2026-09-26, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/74act11244pwr-datasheet.pdf)
page.jsonadded+252
@@ -0,0 +1,252 @@+{+  "slug": "74act11244pwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Buffers, Drivers, Receivers, Transceivers, TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "74act11244pwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "74act11244pwr.kicad_sym",+    "74act11244pwr.kicad_mod",+    "74act11244pwr.glb",+    "74act11244pwr.step",+    "74act11244pwr.lbr",+    "docs/hero.png",+    "docs/74act11244pwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "74ACT11244PWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-24",+    "pin_count": 24,+    "category": "Logic",+    "subcategory": "Buffers, Drivers, Receivers, Transceivers",+    "datasheet": "https://www.ti.com/lit/ds/symlink/74act11244.pdf",+    "parts": {+      "symbol": "74act11244pwr.kicad_sym",+      "footprint": "74act11244pwr.kicad_mod",+      "model_3d": "74act11244pwr-etched.glb",+      "model_3d_plain": "74act11244pwr.glb",+      "model_3d_step": "74act11244pwr-etched.step",+      "model_3d_step_plain": "74act11244pwr.step",+      "lbr": "74act11244pwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2675961",+      "digikey": "296-1002-2-ND",+      "mouser": "595-74ACT11244PWR"+    },+    "distributor_check": {+      "checked_at": "2026-09-26T22:59:16Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-1002-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-74ACT11244PWR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "1Y1",+        "type": "tri_state",+        "description": "Tri-state buffered output for input 1A1; driven to high impedance when 1OE is high."+      },+      {+        "number": "2",+        "name": "1Y2",+        "type": "tri_state",+        "description": "Tri-state buffered output for input 1A2; driven to high impedance when 1OE is high."+      },+      {+        "number": "3",+        "name": "1Y3",+        "type": "tri_state",+        "description": "Tri-state buffered output for input 1A3; driven to high impedance when 1OE is high."+      },+      {+        "number": "4",+        "name": "1Y4",+        "type": "tri_state",+        "description": "Tri-state buffered output for input 1A4; driven to high impedance when 1OE is high."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Ground; center-pin configuration to minimize high-speed switching noise."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Ground; center-pin configuration to minimize high-speed switching noise."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground; center-pin configuration to minimize high-speed switching noise."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground; center-pin configuration to minimize high-speed switching noise."+      },+      {+        "number": "9",+        "name": "2Y1",+        "type": "tri_state",+        "description": "Tri-state buffered output for input 2A1; driven to high impedance when 2OE is high."+      },+      {+        "number": "10",+        "name": "2Y2",+        "type": "tri_state",+        "description": "Tri-state buffered output for input 2A2; driven to high impedance when 2OE is high."+      },+      {+        "number": "11",+        "name": "2Y3",+        "type": "tri_state",+        "description": "Tri-state buffered output for input 2A3; driven to high impedance when 2OE is high."+      },+      {+        "number": "12",+        "name": "2Y4",+        "type": "tri_state",+        "description": "Tri-state buffered output for input 2A4; driven to high impedance when 2OE is high."+      },+      {+        "number": "13",+        "name": "2OE",+        "type": "input",+        "description": "Active-low output enable for buffer section 2; outputs 2Y1-2Y4 driven to high impedance when high."+      },+      {+        "number": "14",+        "name": "2A4",+        "type": "input",+        "description": "Data input for buffer section 2, channel 4; output 2Y4 follows input when 2OE is low."+      },+      {+        "number": "15",+        "name": "2A3",+        "type": "input",+        "description": "Data input for buffer section 2, channel 3; output 2Y3 follows input when 2OE is low."+      },+      {+        "number": "16",+        "name": "2A2",+        "type": "input",+        "description": "Data input for buffer section 2, channel 2; output 2Y2 follows input when 2OE is low."+      },+      {+        "number": "17",+        "name": "2A1",+        "type": "input",+        "description": "Data input for buffer section 2, channel 1; output 2Y1 follows input when 2OE is low."+      },+      {+        "number": "18",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage; center-pin configuration to minimize high-speed switching noise; 4.5 V to 5.5 V recommended."+      },+      {+        "number": "19",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage; center-pin configuration to minimize high-speed switching noise; 4.5 V to 5.5 V recommended."+      },+      {+        "number": "20",+        "name": "1A4",+        "type": "input",+        "description": "Data input for buffer section 1, channel 4; output 1Y4 follows input when 1OE is low."+      },+      {+        "number": "21",+        "name": "1A3",+        "type": "input",+        "description": "Data input for buffer section 1, channel 3; output 1Y3 follows input when 1OE is low."+      },+      {+        "number": "22",+        "name": "1A2",+        "type": "input",+        "description": "Data input for buffer section 1, channel 2; output 1Y2 follows input when 1OE is low."+      },+      {+        "number": "23",+        "name": "1A1",+        "type": "input",+        "description": "Data input for buffer section 1, channel 1; output 1Y1 follows input when 1OE is low."+      },+      {+        "number": "24",+        "name": "1OE",+        "type": "input",+        "description": "Active-low output enable for buffer section 1; outputs 1Y1-1Y4 driven to high impedance when high."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 14,+        "cost_usd": 0.4228,+        "at": "2026-09-26T22:58:57"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/74act11244.pdf",+        "pages": 14,+        "sha256": "a41e4787e3d3fc84",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 24,+        "described": 24,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file