by adom
Dialight 587-1024-147F: addressable RGB LED in a 2020 package (2.0 x 2.0 x 0.9 mm) with integrated driver IC. Single-wire NRZ 800 kbps, 24-bit GRB, WS2812-timing compatible, 3.3-5.5 V, 5 mA per channel, no external capacitor. KiCad symbol + footprint, AI-created STEP/GLB, datasheet attached. NOT footprint-compatible with WS2812B-2020 (power/data pin pairs swapped).
← Commit history
README.mdadded+112@@ -0,0 +1,112 @@+# Dialight 587-1024-147F - 2020 addressable RGB LED, single-wire++**587-1024-147F** (Dialight) is a self-contained addressable RGB pixel in a 2020 SMD package+(2.0 x 2.0 x 0.9 mm, clear epoxy lens): an LED driver IC plus R/G/B emitters with a built-in+20 MHz oscillator, power-on reset and three-channel 5 mA current regulator. One NRZ data line+in, one reshaped data line out, 24-bit GRB per pixel. No external capacitor or resistor is+required (datasheet p.1).++## Pinout (datasheet p.1, mechanical drawing)++| Pin | Name | Function |+|---|---|---|+| 1 | DOUT | Serial data out to the next pixel (signal-reshaped) |+| 2 | VDD | Supply, 3.3-5.5 V (5 V typ) |+| 3 | DIN | Serial data in, 800 kbps NRZ |+| 4 | GND | Ground |++Pin numbers follow the p.1 mechanical drawing. The p.2 LED schematic carries pin-number typos+copied from the 6-pin 587 variant ("GND (PIN 6)" etc.) and was not used.++**Not footprint-compatible with the WS2812B-2020.** Although the protocol is the same, the+pin numbering differs on every pad: on this part VDD is pin 2 and GND is pin 4 (on the+WS2812B-2020 they are pins 1 and 3), and DIN/DOUT are pins 3/1 (not 4/2). The land pattern+also differs (0.9 x 0.9 mm pads on 1.7 mm pitch here vs 0.7 x 0.5 mm on the+[adom/ws2812b-2020](/adom/ws2812b-2020) footprint). Do not drop this part onto a WS2812B-2020+footprint.++## Protocol++Single-wire NRZ at 800 kbps, 24-bit GRB MSB-first per pixel, cascade with per-pixel signal+reshaping. Timing: T0H 0.3 us / T0L 0.9 us / T1H 0.9 us / T1L 0.3 us (tolerance +/-0.15 us),+reset code low >= 250 us (datasheet p.3). Compatible with WS2812/NeoPixel libraries at the+standard 800 kHz timing.++## Specifications (datasheet-backed)++| Parameter | Value | Source |+|---|---|---|+| Package | 2020, 2.0 x 2.0 x 0.9 mm, clear epoxy lens, top view | p.1 |+| Supply voltage VDD | 3.3-5.5 V (5 V typ) | p.1 |+| Quiescent current IDD | 0.8 mA typ | p.2 |+| Sink current per channel | 5 mA typ (4.75 / 5 / 5.25 mA min/typ/max) | p.2 |+| Oscillator | 20 MHz built-in | p.1 |+| Power-on reset | 2.6 V (at VDD = 5 V) | p.1 |+| Luminous intensity R | 65 mcd typ, lambda 618-625 nm (AlInGaP) | p.2 |+| Luminous intensity G | 85 mcd typ, lambda 518-535 nm (InGaN) | p.2 |+| Luminous intensity B | 20 mcd typ, lambda 460-474 nm (InGaN) | p.2 |+| Viewing angle | 120 deg | p.2 |+| Data rate | 800 kbps single-wire NRZ, 24-bit GRB MSB-first | p.1, p.3 |+| MSL | 3 | p.1 |+| Packaging | 3000 pcs on 7 inch reel | p.1 |+| Terminals | 4 pads, 0.6 x 0.6 mm, 0.8 mm gap (1.4 mm pitch) | p.1 bottom view |+| Recommended PCB pads | 4 pads, 0.9 x 0.9 mm, 0.8 mm gap (1.7 mm pitch) | p.2 |++Note on the pad dimensions: the p.1/p.2 dimension callouts are size + gap pairs (0.6 mm+terminal with 0.8 mm gap; 0.9 mm pad with 0.8 mm gap), not size + pitch. Verified by pixel+measurement of the 600 dpi datasheet render; see provenance/provenance.json.++## Footprint++`Dialight_587-1024-147F.kicad_mod`: 4 SMD pads 0.9 x 0.9 mm at (+/-0.85, +/-0.85) mm+(F.Cu + F.Paste + F.Mask), courtyard 3.1 x 3.1 mm, F.Fab body 2.0 x 2.0 mm, silkscreen+outline with pin-1 L-bracket at the pad-1 corner. Zero orientation: pad 1 (DOUT) top-left+per IPC-7351, which is the datasheet top view rotated 180 degrees.++## 3D model++`587-1024-147f.step` / `587-1024-147f.glb` are **AI-created geometry** (no manufacturer CAD+exists for this MPN): a beveled 2.0 x 2.0 x 0.9 mm body with the four 0.6 mm terminals,+modeled from the datasheet p.1 drawings, Z-up, seated on z = 0, pin-1 terminal aligned with+the footprint's pad-1 corner. Generator script: `gen/make_step.py` (CadQuery 2.8.0).++## Sourcing (snapshot 2026-09-28/29, via adom-parts-search)++| Distributor | Part number | Stock | Price |+|---|---|---|---|+| Mouser | [645-587-1024-147F](https://www.mouser.com/en/ProductDetail/Dialight/587-1024-147F) | 20,947 | $0.89 unit / $0.452 @100 (3000/reel) |+| DigiKey | [350-587-1024-147FTR-ND](https://www.digikey.com/en/products/detail/dialight/587-1024-147F/22234965) | 9,522 | $0.85 unit |+| LCSC/JLCPCB | not stocked (checked 2026-09-29) | - | - |++## Manufacturer and resources++- Datasheet (attached, `docs/587-1024-147f-datasheet.pdf`, sha256 a437fad8...):+ [Farnell mirror](https://www.farnell.com/datasheets/4150231.pdf),+ [Mouser mirror](https://www.mouser.com/datasheet/3/350/1/Dialight_datasheet_587_1024_147F_Addressable_RGB.pdf)+- Manufacturer: Dialight, [www.dialightsignalsandcomponents.com](https://www.dialightsignalsandcomponents.com)++## Provenance++Every file on this page is traced in [`provenance/provenance.json`](provenance/provenance.json)+(source URL + retrieval time, SHA-256, authoring classification, generator + params, checks+performed). The datasheet pages cited above are attached as images+(`provenance/ds-page-1.png`, `provenance/ds-page-2.png`). The 3D body is AI-created from the+datasheet dimensions and says so in its provenance record; no manufacturer STEP was found.++| File | SHA-256 (prefix) | Authoring |+|---|---|---|+| 587-1024-147f.kicad_sym | e5aeb45d | AI-generated (adom-symbol 1.2.6) |+| Dialight_587-1024-147F.kicad_mod | fc23477d | AI-generated (adom-footprint 1.0.25) |+| 587-1024-147f.step | 12d73bdf | AI-created (CadQuery 2.8.0, gen/make_step.py) |+| 587-1024-147f.glb | b2cefe7b | AI-created (step2glb from the STEP) |+| docs/587-1024-147f-datasheet.pdf | a437fad8 | Manufacturer document (Dialight) |++## Related++- [adom/led-grid-wall](/adom/led-grid-wall) - the ~16k-pixel LED grid wall this part was cataloged for+- [adom/ws2812b-2020](/adom/ws2812b-2020) - the Worldsemi counterpart (same protocol, different pinout and footprint)++## License++Adom-authored library artwork and generator scripts on this page: CC-BY-4.0. The datasheet+remains Dialight's document and is attached unmodified for reference.
page.jsonadded+66@@ -0,0 +1,66 @@+{+ "slug": "587-1024-147f",+ "title": "Dialight 587-1024-147F — 2020 addressable RGB LED, single-wire",+ "type": "component",+ "kind": "component",+ "version": "0.1.0",+ "description": "Dialight 587-1024-147F: addressable RGB LED in a 2020 package (2.0 x 2.0 x 0.9 mm) with integrated driver IC. Single-wire NRZ 800 kbps, 24-bit GRB, WS2812-timing compatible, 3.3-5.5 V, 5 mA per channel, no external capacitor. KiCad symbol + footprint, AI-created STEP/GLB, datasheet attached. NOT footprint-compatible with WS2812B-2020 (power/data pin pairs swapped).",+ "tags": [+ "hardware",+ "led",+ "rgb-led",+ "addressable-led",+ "ws2812",+ "2020",+ "dialight"+ ],+ "license": "CC-BY-4.0",+ "dependencies": {},+ "hero": {+ "type": "billboard",+ "path": "docs/hero-shot.png",+ "headline": "587-1024-147F",+ "subhead": "Dialight 2020 addressable RGB LED - WS2812-protocol, no external capacitor",+ "screenshot": "docs/hero-shot.png"+ },+ "component": {+ "mpn": "587-1024-147F",+ "manufacturer": "Dialight",+ "package": "2020 (2.0x2.0mm)",+ "pin_count": 4,+ "category": "Optoelectronics",+ "subcategory": "Addressable RGB LED",+ "body_size": {+ "x_mm": 2,+ "y_mm": 2,+ "z_mm": 0.9,+ "pitch_mm": 1.4+ },+ "parts": {+ "symbol": "587-1024-147f.kicad_sym",+ "footprint": "Dialight_587-1024-147F.kicad_mod",+ "model_3d": "587-1024-147f.glb",+ "step": "587-1024-147f.step",+ "datasheet": "docs/587-1024-147f-datasheet.pdf"+ },+ "distributor_links": {+ "mouser": {+ "part": "645-587-1024-147F",+ "url": "https://www.mouser.com/en/ProductDetail/Dialight/587-1024-147F"+ },+ "digikey": {+ "part": "350-587-1024-147FTR-ND",+ "url": "https://www.digikey.com/en/products/detail/dialight/587-1024-147F/22234965"+ },+ "lcsc": false,+ "lcsc_note": "Checked 2026-09-29 via adom-parts-search: 0 hits, not stocked by LCSC/JLCPCB."+ },+ "provenance": "provenance/provenance.json"+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "John Lauer",+ "email": "[email protected]"+ }+}