component
24LC512T-I/SN
Public Made by Adomby adom
Microchip EEPROM, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+6−3@@ -56,7 +56,7 @@ "number": "5", "name": "SDA", "type": "bidirectional",- "description": "Bidirectional I2C serial data line. Open-drain output - requires an external pull-up resistor to VCC (typical 10 k\u03a9 for 100 kHz, 2 k\u03a9 for 400 kHz / 1 MHz). Data on SDA may change only while SCL is low; transitions while SCL is high signal Start/Stop conditions."+ "description": "Bidirectional I2C serial data line. Open-drain output - requires an external pull-up resistor to VCC (typical 10 kΩ for 100 kHz, 2 kΩ for 400 kHz / 1 MHz). Data on SDA may change only while SCL is low; transitions while SCL is high signal Start/Stop conditions." }, { "number": "6",@@ -74,7 +74,7 @@ "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply. 24LC512 operating range +2.5 V to +5.5 V. Typical active current 400 \u00b5A (read @ 400 kHz), write current 5 mA, standby current 100 nA typ / 1 \u00b5A max at 5.5 V. Decouple with 0.1 \u00b5F close to the pin."+ "description": "Positive supply. 24LC512 operating range +2.5 V to +5.5 V. Typical active current 400 µA (read @ 400 kHz), write current 5 mA, standby current 100 nA typ / 1 µA max at 5.5 V. Decouple with 0.1 µF close to the pin." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/24lc512t-i-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }