component
24C32N
Public Made by Adomby adom
XBLW EEPROM, DIP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,19 +32,19 @@ "number": "1", "name": "A0", "type": "input",- "description": "Device/chip select address input bit 0. Hardwire to VCC (VIH) or GND (VIL) to set the low bit of the 3-bit slave address; recommend a 10k\u03a9 or smaller pull to a known state to avoid capacitive-coupling ambiguity. Internally recognized as VIL if left unconnected."+ "description": "Device/chip select address input bit 0. Hardwire to VCC (VIH) or GND (VIL) to set the low bit of the 3-bit slave address; recommend a 10kΩ or smaller pull to a known state to avoid capacitive-coupling ambiguity. Internally recognized as VIL if left unconnected." }, { "number": "2", "name": "A1", "type": "input",- "description": "Device/chip select address input bit 1. Tie to VCC or GND to set the middle bit of the slave-address field; recommend \u226410k\u03a9 pull. Internally recognized as VIL if left floating."+ "description": "Device/chip select address input bit 1. Tie to VCC or GND to set the middle bit of the slave-address field; recommend ≤10kΩ pull. Internally recognized as VIL if left floating." }, { "number": "3", "name": "A2", "type": "input",- "description": "Device/chip select address input bit 2 (MSB of the 3-bit hardware address). Tie to VCC or GND; recommend \u226410k\u03a9 pull. Internally recognized as VIL if left floating."+ "description": "Device/chip select address input bit 2 (MSB of the 3-bit hardware address). Tie to VCC or GND; recommend ≤10kΩ pull. Internally recognized as VIL if left floating." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "SDA", "type": "bidirectional",- "description": "Serial data line for the 2-wire (I\u00b2C-compatible) bus. Open-drain output; requires an external pull-up resistor to VCC and may be wire-ORed with other open-drain devices."+ "description": "Serial data line for the 2-wire (I²C-compatible) bus. Open-drain output; requires an external pull-up resistor to VCC and may be wire-ORed with other open-drain devices." }, { "number": "6",@@ -68,7 +68,7 @@ "number": "7", "name": "WP", "type": "input",- "description": "Hardware write-protect input. When tied to VIH/VCC, all programming (write) operations to the EEPROM array are disabled; when tied low (VIL) or left floating, writes are enabled. Read operations are unaffected. Recommend a \u226410k\u03a9 pull to a known state."+ "description": "Hardware write-protect input. When tied to VIH/VCC, all programming (write) operations to the EEPROM array are disabled; when tied low (VIL) or left floating, writes are enabled. Read operations are unaffected. Recommend a ≤10kΩ pull to a known state." }, { "number": "8",@@ -138,5 +138,8 @@ "docs/24c32n-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }