component
24C32N
Public Made by Adomby adom
XBLW EEPROM, DIP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (fab-chamfer, synthesised, bottom-right)
2 files changed
+235−1
package.json+2−1@@ -24,6 +24,7 @@ "docs/hero.png", "docs/24c32n-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ] }
pads.jsonadded+233@@ -0,0 +1,233 @@+{+ "schema": "adom.pads/1",+ "slug": "24c32n",+ "footprint": "DIP-8_W7.62mm",+ "generated_from": {+ "footprint": "DIP-8_W7.62mm@sha256:222fb44370968119",+ "pins": "page.json:component.pins",+ "overrides": null+ },+ "pin1": {+ "pad": "1",+ "at": [+ 0.0,+ 0.0+ ],+ "corner": "bottom-right",+ "source": "fab-chamfer",+ "derived_from": "DIP-8_W7.62mm@sha256:222fb44370968119"+ },+ "pad_count": 8,+ "paste_apertures": 0,+ "issues": [],+ "pads": [+ {+ "pad": "1",+ "kind": "thru_hole",+ "shape": "roundrect",+ "at": [+ 0.0,+ 0.0+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "1",+ "name": "A0",+ "type": "input",+ "description": "Device/chip select address input bit 0. Hardwire to VCC (VIH) or GND (VIL) to set the low bit of the 3-bit slave address; recommend a 10kΩ or smaller pull to a known state to avoid capacitive-coupling ambiguity. Internally recognized as VIL if left unconnected.",+ "is_pin1": true,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "2",+ "kind": "thru_hole",+ "shape": "circle",+ "at": [+ 0.0,+ 2.54+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "2",+ "name": "A1",+ "type": "input",+ "description": "Device/chip select address input bit 1. Tie to VCC or GND to set the middle bit of the slave-address field; recommend ≤10kΩ pull. Internally recognized as VIL if left floating.",+ "is_pin1": false,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "3",+ "kind": "thru_hole",+ "shape": "circle",+ "at": [+ 0.0,+ 5.08+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "3",+ "name": "A2",+ "type": "input",+ "description": "Device/chip select address input bit 2 (MSB of the 3-bit hardware address). Tie to VCC or GND; recommend ≤10kΩ pull. Internally recognized as VIL if left floating.",+ "is_pin1": false,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "4",+ "kind": "thru_hole",+ "shape": "circle",+ "at": [+ 0.0,+ 7.62+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground return (0 V reference).",+ "is_pin1": false,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "5",+ "kind": "thru_hole",+ "shape": "circle",+ "at": [+ 7.62,+ 7.62+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial data line for the 2-wire (I²C-compatible) bus. Open-drain output; requires an external pull-up resistor to VCC and may be wire-ORed with other open-drain devices.",+ "is_pin1": false,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "6",+ "kind": "thru_hole",+ "shape": "circle",+ "at": [+ 7.62,+ 5.08+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial clock input for the 2-wire bus. Rising edge latches data into the EEPROM; falling edge clocks data out. Schmitt-trigger filtered input; supports 1000 kHz at 2.5-5V and 400 kHz at 1.8V.",+ "is_pin1": false,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "7",+ "kind": "thru_hole",+ "shape": "circle",+ "at": [+ 7.62,+ 2.54+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "7",+ "name": "WP",+ "type": "input",+ "description": "Hardware write-protect input. When tied to VIH/VCC, all programming (write) operations to the EEPROM array are disabled; when tied low (VIL) or left floating, writes are enabled. Read operations are unaffected. Recommend a ≤10kΩ pull to a known state.",+ "is_pin1": false,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "8",+ "kind": "thru_hole",+ "shape": "circle",+ "at": [+ 7.62,+ 0.0+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Main supply input, 1.8V to 5.5V. Decouple locally with a ceramic bypass capacitor (typ. 100 nF) to GND.",+ "is_pin1": false,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ }+ ]+}