component
24C16BN
Public Made by Adomby adom
XBLW EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left)
2 files changed
+267−1
package.json+2−1@@ -24,6 +24,7 @@ "docs/hero.png", "docs/24c16bn-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ] }
pads.jsonadded+265@@ -0,0 +1,265 @@+{+ "schema": "adom.pads/1",+ "slug": "24c16bn",+ "footprint": "SOIC-8_3.9x4.9mm_P1.27mm",+ "generated_from": {+ "footprint": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4",+ "pins": "page.json:component.pins",+ "overrides": null+ },+ "pin1": {+ "pad": "1",+ "at": [+ -2.475,+ -1.905+ ],+ "corner": "top-left",+ "source": "silk-marker",+ "derived_from": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4"+ },+ "pad_count": 8,+ "paste_apertures": 0,+ "issues": [],+ "pads": [+ {+ "pad": "1",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.475,+ -1.905+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. 24C16 does not use any device address pins, so on the 8-lead DIP/SOP/MSOP/TSSOP package pins 1-3 are unused and may be left floating or tied to GND.",+ "is_pin1": true,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "2",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.475,+ -0.635+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Unused on the 8-lead SOP variant; leave floating or tie to GND.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "3",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.475,+ 0.635+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Unused on the 8-lead SOP variant; leave floating or tie to GND.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "4",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.475,+ 1.905+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "5",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.475,+ 1.905+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial data input / open-drain output for the two-wire (I2C-compatible) bus. Requires an external pull-up resistor to VCC (typ. 4.7 kOhm). Can be wire-ORed with other open-drain outputs. Schmitt-trigger filtered input.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "6",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.475,+ 0.635+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial clock input for the two-wire (I2C-compatible) bus. Rising edge latches data into the EEPROM; falling edge clocks data out. Requires an external pull-up resistor to VCC. Bus rates up to 1 MHz (VCC >= 2.5 V) or 400 kHz (VCC = 1.8 V).",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "7",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.475,+ -0.635+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "7",+ "name": "WP",+ "type": "input",+ "description": "Write Protect. Tie to VIL (or GND) to allow programming of the EEPROM array; tie to VIH (or VCC) to disable all write/programming operations. Read operations are unaffected. Internally recognized as VIL if left floating, but the datasheet recommends always driving WP to a known state (pull-up/down resistor <=10 kOhm) to avoid capacitive coupling issues.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "8",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.475,+ -1.905+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive power supply, 1.8 V to 5.5 V. Standby current typically 0.02 uA @ 1.8 V and 0.06 uA @ 5.5 V. Decouple with a 0.1 uF ceramic capacitor close to the pin.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ }+ ]+}