component
24C16BN
Public Made by Adomby adom
XBLW EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "24c16bn",+ "title": "24C16BN",+ "brief": "XBLW 24C16BN XBLW EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "XBLW 24C16BN XBLW EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "memory", "24c16bn" ],+ "component": {+ "mpn": "24C16BN",+ "manufacturer": "XBLW 24C16BN XBLW",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2310191805_XBLW-24C16BN-XBLW_C18723545.pdf",+ "parts": {+ "symbol": "24c16bn.kicad_sym",+ "footprint": "24c16bn.kicad_mod",+ "model_3d": "24c16bn.glb",+ "model_3d_step": "24c16bn.step",+ "lbr": "24c16bn.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. 24C16 does not use any device address pins, so on the 8-lead DIP/SOP/MSOP/TSSOP package pins 1-3 are unused and may be left floating or tied to GND."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Unused on the 8-lead SOP variant; leave floating or tie to GND."+ },+ {+ "number": "3",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Unused on the 8-lead SOP variant; leave floating or tie to GND."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial data input / open-drain output for the two-wire (I2C-compatible) bus. Requires an external pull-up resistor to VCC (typ. 4.7 kOhm). Can be wire-ORed with other open-drain outputs. Schmitt-trigger filtered input."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial clock input for the two-wire (I2C-compatible) bus. Rising edge latches data into the EEPROM; falling edge clocks data out. Requires an external pull-up resistor to VCC. Bus rates up to 1 MHz (VCC >= 2.5 V) or 400 kHz (VCC = 1.8 V)."+ },+ {+ "number": "7",+ "name": "WP",+ "type": "input",+ "description": "Write Protect. Tie to VIL (or GND) to allow programming of the EEPROM array; tie to VIH (or VCC) to disable all write/programming operations. Read operations are unaffected. Internally recognized as VIL if left floating, but the datasheet recommends always driving WP to a known state (pull-up/down resistor <=10 kOhm) to avoid capacitive coupling issues."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive power supply, 1.8 V to 5.5 V. Standby current typically 0.02 uA @ 1.8 V and 0.06 uA @ 5.5 V. Decouple with a 0.1 uF ceramic capacitor close to the pin."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2310191805_XBLW-24C16BN-XBLW_C18723545.pdf",+ "pages": 20,+ "sha256": "cd886c4c7b15f274",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "XBLW 24C16BN XBLW",+ "Package": "SOP-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "24c16bn"+ ],+ "discovery_pitch": "24C16BN (XBLW 24C16BN XBLW) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/24c16bn-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }