24C16BN

@@ -0,0 +1,53 @@+# 24C16BN++**XBLW 24C16BN XBLW** · EEPROM · SOP-8++24C16BN from XBLW 24C16BN XBLW, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NC | unconnected | No connect. 24C16 does not use any device address pins, so on the 8-lead DIP/SOP/MSOP/TSSOP package pins 1-3 are unused and may be left floating or tied to GND. |+| 2 | NC | unconnected | No connect. Unused on the 8-lead SOP variant; leave floating or tie to GND. |+| 3 | NC | unconnected | No connect. Unused on the 8-lead SOP variant; leave floating or tie to GND. |+| 4 | GND | power_in | Ground reference for the device. |+| 5 | SDA | bidirectional | Serial data input / open-drain output for the two-wire (I2C-compatible) bus. Requires an external pull-up resistor to VCC (typ. 4.7 kOhm). Can be wire-ORed with other open-drain outputs. Schmitt-trigger filtered input. |+| 6 | SCL | input | Serial clock input for the two-wire (I2C-compatible) bus. Rising edge latches data into the EEPROM; falling edge clocks data out. Requires an external pull-up resistor to VCC. Bus rates up to 1 MHz (VCC >= 2.5 V) or 400 kHz (VCC = 1.8 V). |+| 7 | WP | input | Write Protect. Tie to VIL (or GND) to allow programming of the EEPROM array; tie to VIH (or VCC) to disable all write/programming operations. Read operations are unaffected. Internally recognized as VIL if left floating, but the datasheet recommends always driving WP to a known state (pull-up/down resistor <=10 kOhm) to avoid capacitive coupling issues. |+| 8 | VCC | power_in | Positive power supply, 1.8 V to 5.5 V. Standby current typically 0.02 uA @ 1.8 V and 0.06 uA @ 5.5 V. Decouple with a 0.1 uF ceramic capacitor close to the pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | XBLW 24C16BN XBLW |+| Package | SOP-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `24C16BNBN`+- `24C16BNN`+- `24C16BNMN`+- `24C16BNTN`+- `24C16BNDN`+- `24C16BND6`+- `24C16BNS`++## CAD (KiCad official)++- Symbol: `24C16BN`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [XBLW 24C16BN XBLW datasheet](docs/24c16bn-datasheet.pdf) (20 pp, sha256 `cd886c4c7b15f274`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/24c16bn-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "24c16bn",+  "version": "0.1.0",+  "type": "component",+  "description": "XBLW 24C16BN XBLW EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "24c16bn"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "24c16bn.kicad_sym",+    "24c16bn.kicad_mod",+    "24c16bn.glb",+    "24c16bn.step",+    "24c16bn.lbr",+    "docs/hero.png",+    "docs/24c16bn-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file