component
24C04-HXY
Public Made by Adomby adom
HXY MOSFET EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left)
2 files changed
+267−1
package.json+2−1@@ -24,6 +24,7 @@ "docs/hero.png", "docs/24c04-hxy-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ] }
pads.jsonadded+265@@ -0,0 +1,265 @@+{+ "schema": "adom.pads/1",+ "slug": "24c04-hxy",+ "footprint": "SOIC-8_3.9x4.9mm_P1.27mm",+ "generated_from": {+ "footprint": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4",+ "pins": "page.json:component.pins",+ "overrides": null+ },+ "pin1": {+ "pad": "1",+ "at": [+ -2.475,+ -1.905+ ],+ "corner": "top-left",+ "source": "silk-marker",+ "derived_from": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4"+ },+ "pad_count": 8,+ "paste_apertures": 0,+ "issues": [],+ "pads": [+ {+ "pad": "1",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.475,+ -1.905+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to GND. Not internally bonded.",+ "is_pin1": true,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "2",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.475,+ -0.635+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "2",+ "name": "A1",+ "type": "input",+ "description": "Device address input bit A1. Hardwired to VIH or VIL to set the chip select bits (bits 5-6) of the I2C device address 1010_A2A1_P0_RW. Internally recognized as VIL if left unconnected, but the datasheet recommends tying to a known level via a resistor <=10 kOhm.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "3",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.475,+ 0.635+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "3",+ "name": "A2",+ "type": "input",+ "description": "Device address input bit A2. Hardwired to VIH or VIL to set the chip select bits of the I2C device address. Internally recognized as VIL if left unconnected; recommend a hard tie via <=10 kOhm resistor.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "4",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.475,+ 1.905+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference. Tie to system ground.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "5",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.475,+ 1.905+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial data line, bi-directional. Open-drain output; requires an external pull-up (typically to VCC). Can be wired-OR with other open-drain devices on the I2C bus.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "6",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.475,+ 0.635+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial clock input. Data is latched on the rising edge and clocked out on the falling edge. Rated up to 1 MHz at 2.5-5.5 V VCC and 400 kHz at 1.8 V VCC.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "7",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.475,+ -0.635+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "7",+ "name": "WP",+ "type": "input",+ "description": "Write protect input. When tied to VIH/VCC, all programming (write) operations to the EEPROM array are disabled; when tied to VIL or left unconnected, writes are allowed. Reads are unaffected. Recommend a hard tie via <=10 kOhm resistor rather than floating.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "8",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.475,+ -1.905+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage input. Operating range 1.8 V to 5.5 V (industrial temp -40 C to +85 C). Standby current < 1 uA. Absolute maximum 8 V.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ }+ ]+}