component
24C04-HXY
Public Made by Adomby adom
HXY MOSFET EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.2.2
4 files changed
+426−6
24c04-hxy-hero.glbadded⋯ 1 unchanged line ⋯
24c04-hxy-hero.overlay.jsonadded+260@@ -0,0 +1,260 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "24C04-HXY",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 8,+ "span_mm": 6.9,+ "dash_mm": 0.1725,+ "gap_mm": 0.1035,+ "pad_stroke_mm": 0.0414+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.552,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -2.11,+ 2.11+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -2.205,+ 2.205+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "24c04-hxy-etched.glb",+ "glb_sha256": "0a191ef228311c6cb6a074d16cbf8b6944fba6b5e117682a22533bf3c13ede69",+ "footprint": "24c04-hxy.kicad_mod",+ "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+ "pins": "page.json component.pins",+ "pins_sha256": "2ea56c718de084e7a486809017bfcac654f29937c5c0b370fbddd6e1fceffc83"+ },+ "generator": "adom-wiki 1.8.24 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "NC",+ "x": -3.6,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "A1",+ "x": -3.6,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "A2",+ "x": -3.6,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "GND",+ "x": -3.6,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "SDA",+ "x": 3.6,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "SCL",+ "x": 3.6,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "WP",+ "x": 3.6,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "VCC",+ "x": 3.6,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
package.json+161−3@@ -1,6 +1,6 @@ { "slug": "24c04-hxy",- "version": "0.2.1",+ "version": "0.2.2", "type": "component", "description": "HXY MOSFET EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -27,7 +27,165 @@ "viewers/symbol.html", "viewers/footprint.html", "pads.json",- "24c04-hxy-etched.glb"+ "24c04-hxy-etched.glb",+ "24c04-hxy-hero.glb",+ "24c04-hxy-hero.overlay.json" ],- "visibility": "public"+ "visibility": "public",+ "component": {+ "mpn": "24C04-HXY",+ "manufacturer": "HXY MOSFET",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2306151052_HXY-MOSFET-24C04-HXY_C7427345.pdf",+ "parts": {+ "symbol": "24c04-hxy.kicad_sym",+ "footprint": "24c04-hxy.kicad_mod",+ "model_3d": "24c04-hxy-hero.glb",+ "model_3d_plain": "24c04-hxy.glb",+ "model_3d_step": "24c04-hxy-etched.step",+ "model_3d_step_plain": "24c04-hxy.step",+ "lbr": "24c04-hxy.lbr"+ },+ "distributor_links": {+ "lcsc": "C7427345"+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to GND. Not internally bonded."+ },+ {+ "number": "2",+ "name": "A1",+ "type": "input",+ "description": "Device address input bit A1. Hardwired to VIH or VIL to set the chip select bits (bits 5-6) of the I2C device address 1010_A2A1_P0_RW. Internally recognized as VIL if left unconnected, but the datasheet recommends tying to a known level via a resistor <=10 kOhm."+ },+ {+ "number": "3",+ "name": "A2",+ "type": "input",+ "description": "Device address input bit A2. Hardwired to VIH or VIL to set the chip select bits of the I2C device address. Internally recognized as VIL if left unconnected; recommend a hard tie via <=10 kOhm resistor."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference. Tie to system ground."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial data line, bi-directional. Open-drain output; requires an external pull-up (typically to VCC). Can be wired-OR with other open-drain devices on the I2C bus."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial clock input. Data is latched on the rising edge and clocked out on the falling edge. Rated up to 1 MHz at 2.5-5.5 V VCC and 400 kHz at 1.8 V VCC."+ },+ {+ "number": "7",+ "name": "WP",+ "type": "input",+ "description": "Write protect input. When tied to VIH/VCC, all programming (write) operations to the EEPROM array are disabled; when tied to VIL or left unconnected, writes are allowed. Reads are unaffected. Recommend a hard tie via <=10 kOhm resistor rather than floating."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage input. Operating range 1.8 V to 5.5 V (industrial temp -40 C to +85 C). Standby current < 1 uA. Absolute maximum 8 V."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2306151052_HXY-MOSFET-24C04-HXY_C7427345.pdf",+ "pages": 18,+ "sha256": "ab3684dafe450b20",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "pin1": {+ "pad": "1",+ "at": [+ -2.475,+ -1.905+ ],+ "corner": "top-left",+ "source": "silk-marker",+ "derived_from": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4",+ "mark": "drawn"+ },+ "models_3d": [+ {+ "file": "24c04-hxy.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "24c04-hxy-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "0bd560a99b1462cae774ab82708ec64ec51ff9f05d938f0b5bdb1f5132a5b203",+ "checked": "2026-11-12",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "24C04-HXY",+ "brief": "HXY MOSFET EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "HXY MOSFET",+ "Package": "SOP-8",+ "Category": "Memory",+ "Pins": "8"+ }+ },+ "discovery_triggers": [+ "24c04-hxy"+ ],+ "discovery_pitch": "24C04-HXY (HXY MOSFET) component page with datasheet-verified CAD." }
page.json+5−3@@ -4,7 +4,7 @@ "slug": "24c04-hxy", "title": "24C04-HXY", "brief": "HXY MOSFET EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.2.1",+ "version": "0.2.2", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -194,10 +194,12 @@ "viewers/symbol.html", "viewers/footprint.html", "pads.json",- "24c04-hxy-etched.glb"+ "24c04-hxy-etched.glb",+ "24c04-hxy-hero.glb",+ "24c04-hxy-hero.overlay.json" ], "visibility": "public", "updated_at": "2026-09-24T14:31:01.280Z", "description": "HXY MOSFET EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "org": "adom"-}+}