component
24C02N
Public Made by Adomby adom
XBLW EEPROM, DIP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (fab-chamfer, synthesised, bottom-right)
2 files changed
+235−1
package.json+2−1@@ -24,6 +24,7 @@ "docs/hero.png", "docs/24c02n-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ] }
pads.jsonadded+233@@ -0,0 +1,233 @@+{+ "schema": "adom.pads/1",+ "slug": "24c02n",+ "footprint": "DIP-8_W7.62mm",+ "generated_from": {+ "footprint": "DIP-8_W7.62mm@sha256:222fb44370968119",+ "pins": "page.json:component.pins",+ "overrides": null+ },+ "pin1": {+ "pad": "1",+ "at": [+ 0.0,+ 0.0+ ],+ "corner": "bottom-right",+ "source": "fab-chamfer",+ "derived_from": "DIP-8_W7.62mm@sha256:222fb44370968119"+ },+ "pad_count": 8,+ "paste_apertures": 0,+ "issues": [],+ "pads": [+ {+ "pad": "1",+ "kind": "thru_hole",+ "shape": "roundrect",+ "at": [+ 0.0,+ 0.0+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "1",+ "name": "A0",+ "type": "input",+ "description": "Device/chip-select address input bit 0. Hardwired to VIH or VIL to set the low bit of the 3-bit slave address (device address bits 5-7 of the I2C address byte). Recommended pull-up/pull-down resistor 10 kohm or less; internally interpreted as VIL if left floating but external tie is strongly recommended.",+ "is_pin1": true,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "2",+ "kind": "thru_hole",+ "shape": "circle",+ "at": [+ 0.0,+ 2.54+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "2",+ "name": "A1",+ "type": "input",+ "description": "Device/chip-select address input bit 1. Hardwired to VIH or VIL to set the middle bit of the 3-bit slave address. Recommended pull-up/pull-down resistor 10 kohm or less.",+ "is_pin1": false,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "3",+ "kind": "thru_hole",+ "shape": "circle",+ "at": [+ 0.0,+ 5.08+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "3",+ "name": "A2",+ "type": "input",+ "description": "Device/chip-select address input bit 2. Hardwired to VIH or VIL to set the high bit of the 3-bit slave address. Together A2/A1/A0 allow up to eight 24C02 devices to share one I2C bus.",+ "is_pin1": false,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "4",+ "kind": "thru_hole",+ "shape": "circle",+ "at": [+ 0.0,+ 7.62+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference (0 V) for the device.",+ "is_pin1": false,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "5",+ "kind": "thru_hole",+ "shape": "circle",+ "at": [+ 7.62,+ 7.62+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial data line for the two-wire (I2C-compatible) bus. Bidirectional, open-drain output; requires an external pull-up resistor to VCC. Data may only change when SCL is low; SDA transitions while SCL is high are interpreted as START or STOP conditions.",+ "is_pin1": false,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "6",+ "kind": "thru_hole",+ "shape": "circle",+ "at": [+ 7.62,+ 5.08+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial clock input for the two-wire bus. Rising edge latches data into the EEPROM; falling edge clocks data out. Supports 1 MHz at 2.5-5V and 400 kHz at 1.8V. Requires an external pull-up on the bus.",+ "is_pin1": false,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "7",+ "kind": "thru_hole",+ "shape": "circle",+ "at": [+ 7.62,+ 2.54+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "7",+ "name": "WP",+ "type": "input",+ "description": "Write-protect input. Tied to VIL (or left floating - internally read as VIL, but tie is recommended) allows all programming operations; tied to VIH or VCC disables all write operations while still allowing reads. Recommended pull-up/pull-down resistor 10 kohm or less.",+ "is_pin1": false,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "8",+ "kind": "thru_hole",+ "shape": "circle",+ "at": [+ 7.62,+ 0.0+ ],+ "rot": 0.0,+ "size": [+ 1.6,+ 1.6+ ],+ "layers": [],+ "thermal": false,+ "pin": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply. Operating range 1.8 V to 5.5 V (industrial temperature -40 to +85 C). Absolute maximum 8 V; any input must stay within -0.3 V to VCC + 0.3 V.",+ "is_pin1": false,+ "source": {+ "geometry": "DIP-8_W7.62mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ }+ ]+}