← Commit history
2305nz-1hdcgi8-hero.overlay.json+258−256
@@ -1,260 +1,262 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "2305NZ-1HDCGI8",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 8,-      "span_mm": 6.9,-      "dash_mm": 0.1725,-      "gap_mm": 0.1035,-      "pad_stroke_mm": 0.0414-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 8,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }+ "spec": "adom-hero 1.4",+ "mpn": "2305NZ-1HDCGI8",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 8,+   "span_mm": 6.9,+   "dash_mm": 0.1725,+   "gap_mm": 0.1035,+   "pad_stroke_mm": 0.0414   },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.552,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.0,-      3.0,-      -2.11,-      2.11-    ],-    "pads_bbox_mm": [-      -3.45,-      3.45,-      -2.205,-      2.205-    ],-    "seating_z_mm": 0.0+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }   },-  "sources": {-    "glb": "2305nz-1hdcgi8-etched.glb",-    "glb_sha256": "8f5809dd63d7a9a8c46366f13c447395699146cacc5e4b3b3204283425e832e8",-    "footprint": "2305nz-1hdcgi8.kicad_mod",-    "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",-    "pins": "page.json component.pins",-    "pins_sha256": "08dc7336a0019463491dba6b13977f43bcb89ab96e23ed6b4db1bdcb1a1f1ed1"-  },-  "generator": "adom-wiki 1.8.15 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "BUF_IN",-      "x": -3.6,-      "y": -1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "OUTPUT1",-      "x": -3.6,-      "y": -0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "OUTPUT2",-      "x": -3.6,-      "y": 0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "GND",-      "x": -3.6,-      "y": 1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "OUTPUT3",-      "x": 3.6,-      "y": 1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "VDD",-      "x": 3.6,-      "y": 0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "OUTPUT4",-      "x": 3.6,-      "y": -0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "OUTPUT5",-      "x": 3.6,-      "y": -1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 8,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.552,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.0,+   3.0,+   -2.11,+   2.11+  ],+  "pads_bbox_mm": [+   -3.45,+   3.45,+   -2.205,+   2.205   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "2305nz-1hdcgi8-etched.glb",+  "glb_sha256": "8f5809dd63d7a9a8c46366f13c447395699146cacc5e4b3b3204283425e832e8",+  "footprint": "2305nz-1hdcgi8.kicad_mod",+  "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+  "pins": "page.json component.pins",+  "pins_sha256": "08dc7336a0019463491dba6b13977f43bcb89ab96e23ed6b4db1bdcb1a1f1ed1"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "BUF_IN",+   "x": -3.6,+   "y": -1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "OUTPUT1",+   "x": -3.6,+   "y": -0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "OUTPUT2",+   "x": -3.6,+   "y": 0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "GND",+   "x": -3.6,+   "y": 1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "OUTPUT3",+   "x": 3.6,+   "y": 1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "VDD",+   "x": 3.6,+   "y": 0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "OUTPUT4",+   "x": 3.6,+   "y": -0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "OUTPUT5",+   "x": 3.6,+   "y": -1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
2305nz-1hdcgi8.lbr+14−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>RENESAS Clock Buffers, Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOIC-8_3.9x4.9mm_P1.27mm">   <description>SOIC-8, 3.9 x 4.9 mm, 1.27 mm pitch</description>@@ -86,6 +86,7 @@ </packages> <symbols> <symbol name="2305NZ-1HDCGI8">+  <description>RENESAS Clock Buffers, Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>   <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -104,7 +105,7 @@ </symbols> <devicesets> <deviceset name="2305NZ-1HDCGI8" prefix="U">-  <description></description>+  <description>RENESAS Clock Buffers, Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="2305NZ-1HDCGI8" x="0" y="0"/>   </gates>@@ -120,7 +121,17 @@         <connect gate="G$1" pin="VDD" pad="6"/>         <connect gate="G$1" pin="OUTPUT3" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="2305NZ-1HDCGI8" constant="no"/>+          <attribute name="MANUFACTURER" value="RENESAS" constant="no"/>+          <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/a0e5b24fa5bb7977085fd87202c6ed56.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/2305nz-1hdcgi8" constant="no"/>+          <attribute name="MOUSER_PN" value="972-2305NZ-1HDCGI8" constant="no"/>+          <attribute name="DIGIKEY_PN" value="6690-2305NZ-1HDCGI8TR-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C1511206" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
README.md+24−25
@@ -8,14 +8,14 @@  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | BUF_IN | input | Input clock with a threshold of VDD/2, accepting frequencies from DC to 133.33MHz. |-| 2 | OUTPUT1 | output | Buffered clock output 1, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz. |-| 3 | OUTPUT2 | output | Buffered clock output 2, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz. |+| 1 | BUF_IN | input | Input clock with a VDD/2 threshold, VIL max 0.8V and VIH min 2V, operating from DC to 133.33MHz. |+| 2 | OUTPUT1 | output | Clock output 1 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA. |+| 3 | OUTPUT2 | output | Clock output 2 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA. | | 4 | GND | power_in | Ground. |-| 5 | OUTPUT3 | output | Buffered clock output 3, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz. |-| 6 | VDD | power_in | 3.3V digital voltage supply, 3V to 3.6V operating range. |-| 7 | OUTPUT4 | output | Buffered clock output 4, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz. |-| 8 | OUTPUT5 | output | Buffered clock output 5, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz. |+| 5 | OUTPUT3 | output | Clock output 3 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA. |+| 6 | VDD | power_in | 3.3V digital supply, operating range 3V to 3.6V, absolute maximum -0.5V to +4.6V. |+| 7 | OUTPUT4 | output | Clock output 4 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA. |+| 8 | OUTPUT5 | output | Clock output 5 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA. |  ## Key specifications @@ -32,33 +32,32 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply Voltage (operating, industrial) | VDD | 3 |  | 3.6 | V |  | 3 |-| Operating Temperature (ambient, industrial) | TA | -40 |  | 85 | °C |  | 3 |-| Load Capacitance, FOUT < 100MHz | CL |  |  | 30 | pF | FOUT < 100MHz | 3 |-| Load Capacitance, 100MHz < FOUT < 133.33MHz | CL |  |  | 15 | pF | 100MHz < FOUT < 133.33MHz | 3 |+| Supply Voltage | VDD | 3 |  | 3.6 | V |  | 3 |+| Operating Temperature (Ambient Temperature) | TA | -40 |  | 85 | °C | Industrial | 3 |+| Load Capacitance | CL |  |  | 30 | pF | FOUT < 100MHz | 3 |+| Load Capacitance | CL |  |  | 15 | pF | 100MHz < FOUT < 133.33MHz | 3 | | Input Capacitance | CIN |  |  | 7 | pF |  | 3 |-| Operating Frequency, BUF_IN and OUTPUT[1:5] | BUF_IN, OUTPUT[1:5] |  |  | 133.33 | MHz |  | 3 |+| Operating Frequency |  |  |  | 133.33 | MHz | BUF_IN, OUTPUT[1:5]; lower bound printed as DC | 3 | | Supply Voltage Range | VDD | -0.5 |  | 4.6 | V |  | 2 |-| Input Voltage Range (REF) | VI | -0.5 |  | 5.5 | V | REF input | 2 |-| Input Voltage Range (except REF) | VI | -0.5 |  |  | V | except REF; max printed as VDD+0.5 | 2 |+| Input Voltage Range (REF) | VI | -0.5 |  | 5.5 | V |  | 2 |+| Input Voltage Range (except REF) | VI | -0.5 |  |  | V |  | 2 | | Input Clamp Current | IIK |  |  | -50 | mA | VI < 0 | 2 | | Continuous Output Current | IO | -50 |  | 50 | mA | VO = 0 to VDD | 2 |-| Continuous Current, VDD or GND |  | -100 |  | 100 | mA | VDD or GND | 2 |+| VDD or GND Continuous Current |  | -100 |  | 100 | mA |  | 2 | | Maximum Power Dissipation |  |  |  | 0.7 | W | TA = 55°C (in still air) | 2 | | Storage Temperature Range | TSTG | -65 |  | 150 | °C |  | 2 |-| Operating Industrial Temperature Range |  | -40 |  | 85 | °C |  | 2 |-| Input LOW Voltage | VIL |  |  | 0.8 | V | BUF_IN threshold VDD/2 (note 1) | 3 |-| Input HIGH Voltage | VIH | 2 |  |  | V | BUF_IN threshold VDD/2 (note 1) | 3 |+| Input LOW Voltage | VIL |  |  | 0.8 | V |  | 3 |+| Input HIGH Voltage | VIH | 2 |  |  | V |  | 3 | | Input LOW Current | IIL |  |  | 50 | μA | VIN = 0V | 3 | | Input HIGH Current | IIH |  |  | 100 | μA | VIN = VDD | 3 | | Output LOW Voltage | VOL |  |  | 0.4 | V | IOL = 12mA | 3 | | Output HIGH Voltage | VOH | 2.4 |  |  | V | IOH = -12mA | 3 | | Supply Current | IDD |  |  | 35 | mA | Unloaded Outputs at 66.66MHz | 3 |-| Rise Time | t3 |  |  | 1.5 | ns | Measured between 0.8V and 2V | 3 |-| Fall Time | t4 |  |  | 1.5 | ns | Measured between 0.8V and 2V | 3 |-| Output to Output Skew | t5 |  |  | 250 | ps | All outputs equally loaded | 3 |-| Propagation Delay, BUF_IN Rising Edge to OUTPUT Rising Edge | t6 | 1 | 5 | 8.7 | ns | Measured at VDD/2 | 3 |-| DC Duty Cycle |  | 45 |  | 55 | % | Measured at VDD/2 | 3 |+| Rise Time | t3 |  |  | 1.5 | ns | Measured between 0.8V and 2V | 4 |+| Fall Time | t4 |  |  | 1.5 | ns | Measured between 0.8V and 2V | 4 |+| Output to Output Skew | t5 |  |  | 250 | ps | All outputs equally loaded | 4 |+| Propagation Delay, BUF_IN Rising Edge to OUTPUT Rising Edge | t6 | 1 | 5 | 8.7 | ns | Measured at VDD/2 | 4 |+| DC Duty Cycle | DC | 45 |  | 55 | % | Measured at VDD/2 | 4 |  ## CAD (KiCad official) @@ -71,8 +70,8 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [RENESAS datasheet](docs/2305nz-1hdcgi8-datasheet.pdf) (7 pp, sha256 `e03b6011703891d2`, retrieved 2026-11-10, tier: lcsc)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Datasheet:** [RENESAS datasheet](docs/2305nz-1hdcgi8-datasheet.pdf) (7 pp, sha256 `e03b6011703891d2`, retrieved 2026-11-11, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/2305nz-1hdcgi8-datasheet.pdf)
package.json+17−18
@@ -1,6 +1,6 @@ {   "slug": "2305nz-1hdcgi8",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "RENESAS Clock Buffers, Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -54,12 +54,11 @@       "mouser": "972-2305NZ-1HDCGI8"     },     "distributor_check": {-      "checked_at": "2026-11-10T06:41:16Z",+      "checked_at": "2026-11-11T02:01:29Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "6690-2305NZ-1HDCGI8TR-ND",-        "status": "found",-        "lifecycle": "Active"+        "status": "found"       },       "mouser": {         "pn": "972-2305NZ-1HDCGI8",@@ -71,19 +70,19 @@         "number": "1",         "name": "BUF_IN",         "type": "input",-        "description": "Input clock with a threshold of VDD/2, accepting frequencies from DC to 133.33MHz."+        "description": "Input clock with a VDD/2 threshold, VIL max 0.8V and VIH min 2V, operating from DC to 133.33MHz."       },       {         "number": "2",         "name": "OUTPUT1",         "type": "output",-        "description": "Buffered clock output 1, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz."+        "description": "Clock output 1 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA."       },       {         "number": "3",         "name": "OUTPUT2",         "type": "output",-        "description": "Buffered clock output 2, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz."+        "description": "Clock output 2 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA."       },       {         "number": "4",@@ -95,25 +94,25 @@         "number": "5",         "name": "OUTPUT3",         "type": "output",-        "description": "Buffered clock output 3, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz."+        "description": "Clock output 3 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA."       },       {         "number": "6",         "name": "VDD",         "type": "power_in",-        "description": "3.3V digital voltage supply, 3V to 3.6V operating range."+        "description": "3.3V digital supply, operating range 3V to 3.6V, absolute maximum -0.5V to +4.6V."       },       {         "number": "7",         "name": "OUTPUT4",         "type": "output",-        "description": "Buffered clock output 4, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz."+        "description": "Clock output 4 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA."       },       {         "number": "8",         "name": "OUTPUT5",         "type": "output",-        "description": "Buffered clock output 5, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz."+        "description": "Clock output 5 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA."       }     ],     "provenance": {@@ -121,17 +120,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The pin description table lists OUTPUT[1:5] as pins 2, 3, 6, 7, 10. Pin 10 does not exist on an 8-pi; The ordered MPN 2305NZ-1HDCGI8 is the 8-pin SOIC, tape and reel, -40 to +85°C. The datasheet lists o"+          "extractor flagged: The pin-description table on page 2 lists VDD on pin 6 and outputs on pins 2, 3, 6, 7, 10. Pin 10 do; BUF_IN = pin 1 and GND = pin 4 agree between the pin table and the drawing. Only the placement of th"         ],         "pages_sent": 7,-        "cost_usd": 0.0745,-        "at": "2026-11-10T06:41:04"+        "cost_usd": 0.0437,+        "at": "2026-11-11T02:01:07"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/a0e5b24fa5bb7977085fd87202c6ed56.pdf",@@ -168,7 +167,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -186,8 +185,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "2be045568ecb171697b68a07a08ca214178660dc4ffaae331c0b45dfab3baf63",-        "checked": "2026-11-10",+        "sha256": "16c4fdc4ce044a8ccc7b2268496b8de4ee0e8f9224ed50843f517c61df250655",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]
page.json+20−19
@@ -4,7 +4,7 @@   "slug": "2305nz-1hdcgi8",   "title": "2305NZ-1HDCGI8",   "brief": "RENESAS Clock Buffers, Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,12 +36,11 @@       "mouser": "972-2305NZ-1HDCGI8"     },     "distributor_check": {-      "checked_at": "2026-11-10T06:41:16Z",+      "checked_at": "2026-11-11T02:01:29Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "6690-2305NZ-1HDCGI8TR-ND",-        "status": "found",-        "lifecycle": "Active"+        "status": "found"       },       "mouser": {         "pn": "972-2305NZ-1HDCGI8",@@ -53,19 +52,19 @@         "number": "1",         "name": "BUF_IN",         "type": "input",-        "description": "Input clock with a threshold of VDD/2, accepting frequencies from DC to 133.33MHz."+        "description": "Input clock with a VDD/2 threshold, VIL max 0.8V and VIH min 2V, operating from DC to 133.33MHz."       },       {         "number": "2",         "name": "OUTPUT1",         "type": "output",-        "description": "Buffered clock output 1, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz."+        "description": "Clock output 1 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA."       },       {         "number": "3",         "name": "OUTPUT2",         "type": "output",-        "description": "Buffered clock output 2, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz."+        "description": "Clock output 2 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA."       },       {         "number": "4",@@ -77,25 +76,25 @@         "number": "5",         "name": "OUTPUT3",         "type": "output",-        "description": "Buffered clock output 3, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz."+        "description": "Clock output 3 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA."       },       {         "number": "6",         "name": "VDD",         "type": "power_in",-        "description": "3.3V digital voltage supply, 3V to 3.6V operating range."+        "description": "3.3V digital supply, operating range 3V to 3.6V, absolute maximum -0.5V to +4.6V."       },       {         "number": "7",         "name": "OUTPUT4",         "type": "output",-        "description": "Buffered clock output 4, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz."+        "description": "Clock output 4 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA."       },       {         "number": "8",         "name": "OUTPUT5",         "type": "output",-        "description": "Buffered clock output 5, operating from DC to 133.33MHz with a maximum load of 30pF below 100MHz and 15pF from 100 to 133.33MHz."+        "description": "Clock output 5 that drives up to 30pF below 100MHz or 15pF from 100MHz to 133.33MHz, with IOL = 12mA and IOH = -12mA."       }     ],     "provenance": {@@ -103,17 +102,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The pin description table lists OUTPUT[1:5] as pins 2, 3, 6, 7, 10. Pin 10 does not exist on an 8-pi; The ordered MPN 2305NZ-1HDCGI8 is the 8-pin SOIC, tape and reel, -40 to +85°C. The datasheet lists o"+          "extractor flagged: The pin-description table on page 2 lists VDD on pin 6 and outputs on pins 2, 3, 6, 7, 10. Pin 10 do; BUF_IN = pin 1 and GND = pin 4 agree between the pin table and the drawing. Only the placement of th"         ],         "pages_sent": 7,-        "cost_usd": 0.0745,-        "at": "2026-11-10T06:41:04"+        "cost_usd": 0.0437,+        "at": "2026-11-11T02:01:07"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/a0e5b24fa5bb7977085fd87202c6ed56.pdf",@@ -150,7 +149,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -168,8 +167,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "2be045568ecb171697b68a07a08ca214178660dc4ffaae331c0b45dfab3baf63",-        "checked": "2026-11-10",+        "sha256": "16c4fdc4ce044a8ccc7b2268496b8de4ee0e8f9224ed50843f517c61df250655",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -552,5 +551,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "RENESAS Clock Buffers, Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file