component
223B TDSEMIC
Public Made by Adomby adom
TDSEMIC Touch Sensors, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left)
2 files changed
+207−1
package.json+2−1@@ -24,6 +24,7 @@ "docs/hero.png", "docs/223b-tdsemic-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ] }
pads.jsonadded+205@@ -0,0 +1,205 @@+{+ "schema": "adom.pads/1",+ "slug": "223b-tdsemic",+ "footprint": "SOT-23-6",+ "generated_from": {+ "footprint": "SOT-23-6@sha256:f341c73aac9dcb55",+ "pins": "page.json:component.pins",+ "overrides": null+ },+ "pin1": {+ "pad": "1",+ "at": [+ -1.1375,+ -0.95+ ],+ "corner": "top-left",+ "source": "silk-marker",+ "derived_from": "SOT-23-6@sha256:f341c73aac9dcb55"+ },+ "pad_count": 6,+ "paste_apertures": 0,+ "issues": [],+ "pads": [+ {+ "pad": "1",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -1.1375,+ -0.95+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "1",+ "name": "OUT",+ "type": "output",+ "description": "Push-pull touch-detection output. Sources up to ~6 mA and sinks up to ~10 mA; output polarity and behavior (momentary vs latched) set by SLH and STG. Response time ~60 ms.",+ "is_pin1": true,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "2",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -1.1375,+ 0.0+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground / VSS reference (0 V).",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "3",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -1.1375,+ 0.95+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "3",+ "name": "SO",+ "type": "input",+ "description": "Touch sense input. Connect to the touch pad; sensitivity is set by a 0-50 pF cap (C1) to ground, with an optional 100-1000 Ω series resistor (Rs) for EMI robustness. Sensor frequency ~500 kHz at VDD=3.0 V, no load.",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "4",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 1.1375,+ 0.95+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "4",+ "name": "SLH",+ "type": "input",+ "description": "Output active-level select (must NOT be left floating). Tie to GND: touch outputs high, idle low. Tie to VDD: touch outputs low, idle high. Output swing equals VDD.",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "5",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 1.1375,+ 0.0+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "5",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply, 2.0-5.5 V (typ 3.0 V). Typical operating current 2.5 uA (max 7 uA) at VDD=3.0 V; decouple with 100 nF + 10 uF near the pin.",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "6",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 1.1375,+ -0.95+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "6",+ "name": "STG",+ "type": "input",+ "description": "Mode select (must NOT be left floating). Tie to GND: synchronous-output mode (momentary, output tracks touch, max touch time 6 s). Tie to VDD: level-toggle mode (self-lock; each touch inverts output, max touch time 6 s).",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ }+ ]+}