component

2-1445098-3

Public Made by Adom

by adom

TE Connectivity Micro MATE-N-LOK header, right angle, 3 position, 3.00 mm pitch, plastic holddown. Footprint and 3D built from the TE drawing.

componentconnectors2-1445098-3board-derived

Verified 2-1445098-3

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 3 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against TE customer drawing C-1445098 rev C; footprint and 3D rebuilt to the drawingfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: TE customer drawing C-1445098 rev C (12 Dec 2025, ECN-25-359104), 2 sheets, re-downloaded from te.com 2026-10-27, byte-identical to the page copy (sha256 86b030c7...).
  • ✓BOM: NTX_CCX-MIO_Carrier_v1.1 J13 is "TE: 2-1445098-3" (BOM, schematic and board value), the same MPN as the page: the page is the intended part.
  • ✓Pins 1-3: names are the contact numbers (the drawing has no signal names), all passive. Circuit 1 = right-hand cavity seen from the mating face (sheet 1 CIRCUIT NUMBER 1); 2 and 3 follow in order. Descriptions rewritten with the cavity keying from sheet 2.
  • ✓Footprint rebuilt from sheet 2 PCB LAYOUT FOR 3 POSITION: contacts at 3.00 pitch (6.00 span), drill 1.12 (middle of the 1.02 +0.20/-0 finished-hole band), pads 1.80; holddown hole 3.00 +-0.08 NPTH centred on contact 2, 4.32 from the row on the mating-face side; overlay of the drills on the layout coincides (provenance/evidence/overlay_sheet2_pcb_layout.png). Old footprint was a 2.54 mm vertical socket (pins 2 and 3 0.46 and 0.92 mm off, drill 1.00, no holddown hole).
  • ✓Pin 1 orientation: third-angle projection (title-block symbol); in the top view circuit 1 is on the right with the mating face toward the viewer, so with the mating face toward -y pad 1 is at x = -3.00. Silk triangle and F.Fab chevron mark pad 1; courtyard 0.5 mm round the body (latches +-6.57, face -8.92, contact bend +0.94).
  • ✓3D rebuilt (tier 3, cadquery, CC-BY-SA-4.0) from the drawing: 13.14 x 9.86 x 9.18 mm; DIM W 13.14 +-0.39, DIM Y 10.00, 3.86 + 0.51 housing, 1.30 latch, (8.92) face, (7.88) holddown tip, DIM X 3.30 +-0.15 barbs; overlays on the sheet 1 side view and sheet 2 3 POS view coincide. TE STEP rejected: te.com terms forbid redistribution. KiCad has no Micro MATE-N-LOK model.
  • •Undimensioned detail measured off the drawing at 47.24 px/mm; cavity depth (6.0) and mating-pin tip position are cosmetic assumptions (not shown on the drawing), recorded in provenance/3d-model.json.
  • ✓step_pose.py: plain and etched STEP PASS (Z-up, seated, THT tails and peg below, identity binding); body 3.99 mm off the pad-pattern centre by design (right-angle overhang), courtyard centred on the body, contacts in all 3 holes.
  • •Symbol Footprint property changed from Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical to 2-1445098-3:2-1445098-3 (the page footprint).
  • ✓Distributors: DigiKey A34859-ND (TE Connectivity AMP Connectors 2-1445098-3, CONN HEADER R/A 3POS 3MM) and Mouser 571-2-1445098-3 (TE Connectivity / AMP 2-1445098-3) confirmed by search 2026-10-27.
  • •Board affected: NTX_CCX-MIO_Carrier_v1.1 J13 uses Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical (2.54 pitch, drill 1.00, no holddown hole), so the part cannot be fitted there; the board is Caleb's to change.
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
EvidenceTE customer drawing C-1445098 rev Cte.com Terms of Use (why TE CAD is not redistributed)
Verified files✓ 2-1445098-3.kicad_sym✓ 2-1445098-3.kicad_mod✓ 2-1445098-3.step
9 Oct 2026Claude (AI build)Board uses a generic KiCad pin-header footprint and model, not a Micro MATE-N-LOK land pat...superseded
reviewfor all variants
  • •Board uses a generic KiCad pin-header footprint and model, not a Micro MATE-N-LOK land pattern (3.0 mm pitch, right angle, hold-downs). Footprint and 3D need checking against the TE drawing before use.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓3 of 3 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! 2-1445098-3.kicad_sym! 2-1445098-3.kicad_mod! 2-1445098-3.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
← Commit history

Pin names from the datasheet; CAD and verification log updated

Caleb ·202112fee9 ·19d ago ·parent f9e0053
4 files changed +16−16
2-1445098-3.kicad_sym+3−32-1445098-3.lbr+6−6README.md+4−4verification.json+3−3
2-1445098-3.kicad_sym+3−3
@@ -143,7 +143,7 @@ 			(pin passive line 				(at 5.08 2.54 180) 				(length 3.81)-				(name "Pin_1"+				(name "1" 					(effects 						(font (size 1.27 1.27)) 					)@@ -157,7 +157,7 @@ 			(pin passive line 				(at 5.08 0 180) 				(length 3.81)-				(name "Pin_2"+				(name "2" 					(effects 						(font (size 1.27 1.27)) 					)@@ -171,7 +171,7 @@ 			(pin passive line 				(at 5.08 -2.54 180) 				(length 3.81)-				(name "Pin_3"+				(name "3" 					(effects 						(font (size 1.27 1.27)) 					)
2-1445098-3.lbr+6−6
@@ -87,11 +87,11 @@   <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-5.0800" size="1.27" layer="96" align="center">&gt;VALUE</text>   <wire x1="5.0800" y1="2.5400" x2="1.2700" y2="2.5400" width="0.254" layer="94"/>-  <pin name="Pin_1" x="5.08" y="2.54" length="point" direction="pas" rot="R180" visible="pad"/>+  <pin name="1" x="5.08" y="2.54" length="point" direction="pas" rot="R180" visible="pad"/>   <wire x1="5.0800" y1="0.0000" x2="1.2700" y2="0.0000" width="0.254" layer="94"/>-  <pin name="Pin_2" x="5.08" y="0" length="point" direction="pas" rot="R180" visible="pad"/>+  <pin name="2" x="5.08" y="0" length="point" direction="pas" rot="R180" visible="pad"/>   <wire x1="5.0800" y1="-2.5400" x2="1.2700" y2="-2.5400" width="0.254" layer="94"/>-  <pin name="Pin_3" x="5.08" y="-2.54" length="point" direction="pas" rot="R180" visible="pad"/>+  <pin name="3" x="5.08" y="-2.54" length="point" direction="pas" rot="R180" visible="pad"/> </symbol> </symbols> <devicesets>@@ -103,9 +103,9 @@   <devices>     <device name="" package="2-1445098-3">       <connects>-        <connect gate="G$1" pin="Pin_1" pad="1"/>-        <connect gate="G$1" pin="Pin_2" pad="2"/>-        <connect gate="G$1" pin="Pin_3" pad="3"/>+        <connect gate="G$1" pin="1" pad="1"/>+        <connect gate="G$1" pin="2" pad="2"/>+        <connect gate="G$1" pin="3" pad="3"/>       </connects>       <technologies>         <technology name="">
README.md+4−4
@@ -10,9 +10,9 @@  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | Pin_1 | passive | Contact Pin_1; position numbering per the manufacturer drawing. [from symbol] |-| 2 | Pin_2 | passive | Contact Pin_2; position numbering per the manufacturer drawing. [from symbol] |-| 3 | Pin_3 | passive | Contact Pin_3; position numbering per the manufacturer drawing. [from symbol] |+| 1 | 1 | passive | Contact 1; position numbering per the manufacturer drawing. [from symbol] |+| 2 | 2 | passive | Contact 2; position numbering per the manufacturer drawing. [from symbol] |+| 3 | 3 | passive | Contact 3; position numbering per the manufacturer drawing. [from symbol] |  ## Key specifications @@ -33,7 +33,7 @@  ## Provenance -- **Datasheet:** [TE Connectivity datasheet](https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=1445098&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf) (sha256 `86b030c7ac8e8246`, retrieved 2026-10-08, tier: mfr)+- **Datasheet:** [TE Connectivity datasheet](https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=1445098&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf) (sha256 `86b030c7ac8e8246`, retrieved 2026-10-09, tier: mfr) - **CAD:** KiCad official libraries (CC-BY-SA 4.0); footprint and symbol as used on Adom boards. - **Pins:** KiCad symbol from the source board.
verification.json+3−3
@@ -4,7 +4,7 @@  "variants": [],  "entries": [   {-   "date": "2026-10-08",+   "date": "2026-10-09",    "by": {     "name": "Claude (AI build)",     "handle": "claude"@@ -49,13 +49,13 @@     }    ],    "files": {-    "2-1445098-3.kicad_sym": "788b9453c433847b21226ad8f55ea500700b41316257747c842d717c8b68a1e7",+    "2-1445098-3.kicad_sym": "d420c3ad40a30a5859a0631766ae9d2b6937ff848ef61bebefdbf09371aa6c3f",     "2-1445098-3.kicad_mod": "4058015da911af5fb440d66545588711d7a0d0f985fc06523de284e0aa5d2f87",     "2-1445098-3.step": "c9ee78622579ac4e6b7262405dee340bed1a9a9750495e7a821f39f91de369c2"    }   },   {-   "date": "2026-10-08",+   "date": "2026-10-09",    "by": {     "name": "Claude (AI build)",     "handle": "claude"